As far as I know, there is no BIOS with a voltage lower than 0.9V for the nvidia chip. There is the possibility to do a hardware mod to lower the voltage (you have to relocate / remove / add some resistors in the VID lines for the nvidia chip according to the desired voltage) but the probability that the chip will be stable with significantly less voltage than 0.9V is extremely low. Some NVS 140M chips are not even stable at 0.9v and need the 0.95v BIOS. Don't bother, it's not worth the effort.
No idea if there is a possibility to undervolt the CPU further via software.
@CS: Hast du es schon mal mit Windows 7 getestet? Es sieht für mich nicht so aus, als ob es etwas mit der CPU zu tun hätte. Eher RAM, Treiber, OS oder irgendeine andere Hardware wi z. B. WLAN-Karte oder WWAN-Karte.
Was ich machen würde wäre, auf einer anderen HDD Windows 7 drauf machen, die Treiber installieren, die WWAN-Karte rausnehmen und falls du die Möglichkeit hast die WLAN-Karte gegen irgendeine andere tauschen. Sollte der Fehler dann immer noch kommen, dann kann man weitersuchen. Kostet aber natürlich alles Zeit, die du wahrscheinlich nicht hast.
Übrigens kann der RAM auch instabil sein, wenn memtest86+ mehrmals fehlerfrei durchläuft. Bei mir war damals genau das der Fall. Erst nachdem ich nochmal was im SPD-Profil geändert habe ging es. Hast du deinen RAM auf DDR2-533 oder auf DDR2-667? Wenn letzteres, dann würde ich es mal mit DDR2-533 testen. Was für Riegel hast du genau drin (Hersteller, Modell, Größe, Chipanzahl)?