[ 6.056548] Bluetooth: RFCOMM socket layer initialized
[ 6.056551] Bluetooth: RFCOMM ver 1.11
[ 6.059949] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.059953] Bluetooth: BNEP filters: protocol multicast
[ 6.079426] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 6.079659] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.092328] thinkpad_ec: thinkpad_ec 0.41 loaded.
[ 6.092643] tp_smapi 0.41 loading...
[ 6.093314] tp_smapi successfully loaded (smapi_port=0xb2).
[ 6.151160] smapi smapi: smapi_request: SMAPI error: SMAPI function is not available (func=2116)
[ 6.151164] smapi smapi: __get_real_thresh: cannot get start_thresh of bat=0: SMAPI function is not available
[ 7.645564] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 7.645569] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 7.645729] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.410442] psmouse serio2: ID: 10 00 64
[ 9.159526] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=60
[ 9.168840] EXT4-fs (sda7): re-mounted. Opts: commit=60
[ 9.283373] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 9.283376] ata2.00: waking up from sleep
[ 9.283380] ata2: hard resetting link
[ 9.599343] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.601858] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 9.602526] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 9.602529] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 9.607475] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 9.608141] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 9.608144] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 9.609805] ata2.00: configured for UDMA/100
[ 9.623563] ata2: EH complete
[ 10.115025] xhci_hcd 0000:0d:00.0: PME# enabled
[ 10.627647] ata2.00: disabled
[ 10.633148] ACPI: \_SB_.PCI0.SAT1.PRT1 - undocking
[ 12.373111] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 12.622342] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10
[ 14.153083] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[ 14.153129] ehci_hcd 0000:00:1d.0: PME# enabled
[ 14.153378] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 14.153420] ehci_hcd 0000:00:1a.0: PME# enabled
[ 14.169144] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 14.169147] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 21.788842] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 31.516070] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 31.528715] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xf162a000-0xf162a3ff] (PCI address [0xf162a000-0xf162a3ff])
[ 31.528723] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 31.528739] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 31.528757] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 31.528780] ehci_hcd 0000:00:1a.0: PME# disabled
[ 31.528784] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 31.528788] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 31.528796] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 31.528801] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 31.660703] usb 1-1.4: USB disconnect, device number 3
[ 35.964851] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 35.964890] ehci_hcd 0000:00:1a.0: PME# enabled
[ 35.980830] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 95.479916] xhci_hcd 0000:0d:00.0: PME# disabled
[ 95.479950] xhci_hcd 0000:0d:00.0: setting latency timer to 64
[ 95.480113] xhci_hcd 0000:0d:00.0: remove, state 84
[ 95.495761] usb usb4: USB disconnect, device number 1
[ 95.495910] xHCI xhci_drop_endpoint called for root hub
[ 95.495916] xHCI xhci_check_bandwidth called for root hub
[ 95.516937] xhci_hcd 0000:0d:00.0: USB bus 4 deregistered
[ 95.517032] xhci_hcd 0000:0d:00.0: remove, state 1
[ 95.599422] hub 3-0:1.0: activate --> -108
[ 95.599515] usb usb3: USB disconnect, device number 1
[ 95.599712] xHCI xhci_drop_endpoint called for root hub
[ 95.599723] xHCI xhci_check_bandwidth called for root hub
[ 95.655787] xhci_hcd 0000:0d:00.0: USB bus 3 deregistered
[ 95.655924] xhci_hcd 0000:0d:00.0: PCI INT A disabled
[ 95.692433] xhci_hcd 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 95.692498] xhci_hcd 0000:0d:00.0: setting latency timer to 64
[ 95.692511] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 95.692701] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 3
[ 95.692978] xhci_hcd 0000:0d:00.0: irq 16, io mem 0xf0c00000
[ 95.693157] xhci_hcd 0000:0d:00.0: irq 41 for MSI/MSI-X
[ 95.693176] xhci_hcd 0000:0d:00.0: irq 42 for MSI/MSI-X
[ 95.693192] xhci_hcd 0000:0d:00.0: irq 43 for MSI/MSI-X
[ 95.693208] xhci_hcd 0000:0d:00.0: irq 44 for MSI/MSI-X
[ 95.693224] xhci_hcd 0000:0d:00.0: irq 45 for MSI/MSI-X
[ 95.693757] xHCI xhci_add_endpoint called for root hub
[ 95.693765] xHCI xhci_check_bandwidth called for root hub
[ 95.693876] hub 3-0:1.0: USB hub found
[ 95.693899] hub 3-0:1.0: 2 ports detected
[ 95.694082] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 95.694228] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 4
[ 95.696537] xHCI xhci_add_endpoint called for root hub
[ 95.696546] xHCI xhci_check_bandwidth called for root hub
[ 95.696654] hub 4-0:1.0: USB hub found
[ 95.696676] hub 4-0:1.0: 2 ports detected
[ 97.808396] xhci_hcd 0000:0d:00.0: PME# enabled
[ 211.263154] xhci_hcd 0000:0d:00.0: PME# disabled
[ 211.263192] xhci_hcd 0000:0d:00.0: setting latency timer to 64
[ 211.263368] xhci_hcd 0000:0d:00.0: remove, state 84
[ 211.278961] usb usb4: USB disconnect, device number 1
[ 211.279107] xHCI xhci_drop_endpoint called for root hub
[ 211.279113] xHCI xhci_check_bandwidth called for root hub
[ 211.330112] xhci_hcd 0000:0d:00.0: USB bus 4 deregistered
[ 211.330204] xhci_hcd 0000:0d:00.0: remove, state 1
[ 211.382679] hub 3-0:1.0: activate --> -108
[ 211.382758] usb usb3: USB disconnect, device number 1
[ 211.382904] xHCI xhci_drop_endpoint called for root hub
[ 211.382912] xHCI xhci_check_bandwidth called for root hub
[ 211.403149] xhci_hcd 0000:0d:00.0: USB bus 3 deregistered
[ 211.403319] xhci_hcd 0000:0d:00.0: PCI INT A disabled
[ 229.353083] xhci_hcd 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 229.353137] xhci_hcd 0000:0d:00.0: setting latency timer to 64
[ 229.353149] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 229.353289] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 3
[ 229.353561] xhci_hcd 0000:0d:00.0: irq 16, io mem 0xf0c00000
[ 229.353739] xhci_hcd 0000:0d:00.0: irq 41 for MSI/MSI-X
[ 229.353759] xhci_hcd 0000:0d:00.0: irq 42 for MSI/MSI-X
[ 229.353778] xhci_hcd 0000:0d:00.0: irq 43 for MSI/MSI-X
[ 229.353796] xhci_hcd 0000:0d:00.0: irq 44 for MSI/MSI-X
[ 229.353812] xhci_hcd 0000:0d:00.0: irq 45 for MSI/MSI-X
[ 229.354366] xHCI xhci_add_endpoint called for root hub
[ 229.354374] xHCI xhci_check_bandwidth called for root hub
[ 229.354485] hub 3-0:1.0: USB hub found
[ 229.354509] hub 3-0:1.0: 2 ports detected
[ 229.354710] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 229.354892] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 4
[ 229.357452] xHCI xhci_add_endpoint called for root hub
[ 229.357461] xHCI xhci_check_bandwidth called for root hub
[ 229.357570] hub 4-0:1.0: USB hub found
[ 229.357594] hub 4-0:1.0: 2 ports detected
[ 231.571781] xhci_hcd 0000:0d:00.0: PME# enabled