Debian Jessie auf T22

exc64user · 18 Feb. 2016

Hallo

Meine Frage ist ob es jemand schon geschafft hat, Debian 8 Jessie erfolgreich zu installieren und dabei die Auflösung Display bei 1024x768 läuft.
Bei mir geht nur 800x600. Habe in der Xorg Logdatei einige probs gefunden weis nur nicht warum er nicht die Aufläsung macht.

Code:

) SAVAGE(0): I2C bus "I2C bus" initialized.
[    25.306] (II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
[    25.309] (--) SAVAGE(0): Detected current MCLK value of 83.045 MHz
[    25.309] (--) SAVAGE(0): 1024x768 TFT LCD panel detected and active
[    25.309] (--) SAVAGE(0): - Limiting video mode to 1024x768
[    25.345] (--) SAVAGE(0): Found 13 modes at this depth:
[    25.345]     [10e] 320 x 200, 70Hz
[    25.345]     [111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[    25.345]     [114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[    25.345]     [117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 43Hz, 100Hz
[    25.346]     [11a] 1280 x 1024, 60Hz, 75Hz, 85Hz, 43Hz
[    25.346]     [11d] 640 x 400, 70Hz
[    25.346]     [122] 1600 x 1200, 48Hz, 60Hz, 75Hz, 85Hz
[    25.346]     [133] 320 x 240, 72Hz
[    25.346]     [13c] 1400 x 1050, 60Hz, 75Hz
[    25.346]     [143] 400 x 300, 72Hz
[    25.346]     [153] 512 x 384, 70Hz
[    25.346]     [173] 720 x 480, 75Hz
[    25.346]     [178] 720 x 576, 75Hz
[    25.346] (II) SAVAGE(0): <default monitor>: Using hsync range of 31.50-47.30 kHz
[    25.346] (II) SAVAGE(0): <default monitor>: Using vrefresh range of 56.00-59.87 Hz
[    25.346] (II) SAVAGE(0): <default monitor>: Using maximum pixel clock of 56.00 MHz
[    25.346] (II) SAVAGE(0): Estimated virtual size for aspect ratio 1.3333 is 1024x768
[    25.347] (II) SAVAGE(0): Clock range:  10.00 to 250.00 MHz
[    25.347] (--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
[    25.347] (II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
[    25.347] (--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
[    25.347] (II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
[    25.347] (--) SAVAGE(0): Chose mode 11d at 70Hz.
[    25.347] (II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range)
[    25.347] (--) SAVAGE(0): Chose mode 10e at 70Hz.
[    25.347] (II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range)
[    25.347] (--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
[    25.347] (II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
[    25.347] (--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
[    25.347] (II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
[    25.347] (--) SAVAGE(0): Chose mode 111 at 60Hz.
[    25.347] (--) SAVAGE(0): Chose mode 133 at 72Hz.
[    25.347] (--) SAVAGE(0): Chose mode 111 at 72Hz.
[    25.347] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
[    25.347] (--) SAVAGE(0): Chose mode 133 at 72Hz.
[    25.347] (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
[    25.347] (--) SAVAGE(0): Chose mode 111 at 75Hz.
[    25.347] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
[    25.348] (--) SAVAGE(0): Chose mode 133 at 72Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
[    25.348] (--) SAVAGE(0): Chose mode 111 at 85Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
[    25.348] (--) SAVAGE(0): Chose mode 133 at 72Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
[    25.348] (--) SAVAGE(0): Chose mode 114 at 60Hz.
[    25.348] (--) SAVAGE(0): Chose mode 143 at 72Hz.
[    25.348] (--) SAVAGE(0): Chose mode 114 at 60Hz.
[    25.348] (--) SAVAGE(0): Chose mode 143 at 72Hz.
[    25.348] (--) SAVAGE(0): Chose mode 114 at 72Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[    25.348] (--) SAVAGE(0): Chose mode 143 at 72Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
[    25.348] (--) SAVAGE(0): Chose mode 114 at 75Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
[    25.348] (--) SAVAGE(0): Chose mode 143 at 72Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
[    25.348] (--) SAVAGE(0): Chose mode 114 at 85Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[    25.348] (--) SAVAGE(0): Chose mode 143 at 72Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
[    25.348] (--) SAVAGE(0): Chose mode 117 at 85Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "1024x768i" (vrefresh out of range)
[    25.348] (--) SAVAGE(0): Chose mode 153 at 70Hz.
[    25.348] (II) SAVAGE(0): Not using default mode "512x384i" (vrefresh out of range)
[    25.349] (--) SAVAGE(0): Chose mode 117 at 60Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[    25.349] (--) SAVAGE(0): Chose mode 153 at 70Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
[    25.349] (--) SAVAGE(0): Chose mode 117 at 70Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[    25.349] (--) SAVAGE(0): Chose mode 153 at 70Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
[    25.349] (--) SAVAGE(0): Chose mode 117 at 75Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[    25.349] (--) SAVAGE(0): Chose mode 153 at 70Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
[    25.349] (--) SAVAGE(0): Chose mode 117 at 85Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[    25.349] (--) SAVAGE(0): Chose mode 153 at 70Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
[    25.349] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
[    25.349] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
[    25.349] (II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size)
[    25.349] (--) SAVAGE(0): Chose mode 111 at 60Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
[    25.349] (II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size)
[    25.349] (--) SAVAGE(0): Chose mode 111 at 85Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
[    25.349] (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
[    25.349] (--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
[    25.349] (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
[    25.349] (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
[    25.349] (--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
[    25.350] (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
[    25.350] (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
[    25.350] (--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
[    25.350] (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
[    25.350] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
[    25.350] (--) SAVAGE(0): Chose mode 114 at 60Hz.
[    25.350] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[    25.350] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
[    25.350] (--) SAVAGE(0): Chose mode 114 at 60Hz.
[    25.350] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[    25.350] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
[    25.350] (--) SAVAGE(0): Chose mode 114 at 72Hz.
[    25.350] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[    25.350] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
[    25.350] (--) SAVAGE(0): Chose mode 114 at 75Hz.
[    25.350] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[    25.350] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
[    25.350] (--) SAVAGE(0): Chose mode 114 at 85Hz.
[    25.350] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[    25.350] (II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size)
[    25.350] (--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz.
[    25.350] (II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
[    25.350] (II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size)
[    25.350] (--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz.
[    25.350] (II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
[    25.350] (II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size)
[    25.350] (--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz.
[    25.350] (II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
[    25.350] (II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
[    25.351] (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
[    25.351] (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "832x624" (no mode of this name)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
[    25.351] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 60Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
[    25.351] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 70Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
[    25.351] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 74Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
[    25.351] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
[    25.351] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
[    25.351] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
[    25.351] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 100Hz.
[    25.351] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
[    25.352] (II) SAVAGE(0): Not using default mode "1360x768" (width too large for virtual size)
[    25.352] (--) SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz.
[    25.352] (II) SAVAGE(0): Not using default mode "680x384" (no mode of this name)
[    25.352] (II) SAVAGE(0): Not using default mode "1360x768" (width too large for virtual size)
[    25.352] (--) SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz.
[    25.352] (II) SAVAGE(0): Not using default mode "680x384" (no mode of this name)
[    25.352] (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
[    25.352] (--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
[    25.352] (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
[    25.352] (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
[    25.352] (--) SAVAGE(0): No suitable BIOS mode found for 700x525 70Hz.
[    25.352] (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
[    25.352] (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
[    25.352] (--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
[    25.352] (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
[    25.352] (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
[    25.352] (--) SAVAGE(0): No suitable BIOS mode found for 700x525 85Hz.
[    25.352] (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
[    25.352] (II) SAVAGE(0): Not using default mode "1440x900" (width too large for virtual size)
[    25.352] (--) SAVAGE(0): No suitable BIOS mode found for 720x450 59Hz.
[    25.352] (II) SAVAGE(0): Not using default mode "720x450" (no mode of this name)
[    25.352] (II) SAVAGE(0): Not using default mode "1600x1024" (width too large for virtual size)
[    25.352] (--) SAVAGE(0): No suitable BIOS mode found for 800x512 60Hz.
[    25.352] (II) SAVAGE(0): Not using default mode "800x512" (no mode of this name)
[    25.352] (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size)
[    25.352] (--) SAVAGE(0): No suitable BIOS mode found for 840x525 59Hz.
[    25.352] (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
[    25.352] (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size)
[    25.353] (--) SAVAGE(0): No suitable BIOS mode found for 840x525 60Hz.
[    25.353] (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
[    25.353] (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size)
[    25.353] (--) SAVAGE(0): No suitable BIOS mode found for 840x525 69Hz.
[    25.353] (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
[    25.353] (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size)
[    25.353] (--) SAVAGE(0): No suitable BIOS mode found for 840x525 74Hz.
[    25.353] (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
[    25.353] (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size)
[    25.353] (--) SAVAGE(0): No suitable BIOS mode found for 840x525 85Hz.
[    25.353] (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
[    25.353] (II) SAVAGE(0): Not using default mode "1920x1080" (width too large for virtual size)
[    25.353] (--) SAVAGE(0): No suitable BIOS mode found for 960x540 59Hz.
[    25.353] (II) SAVAGE(0): Not using default mode "960x540" (no mode of this name)
[    25.353] (II) SAVAGE(0): Not using default mode "1920x1200" (width too large for virtual size)
[    25.353] (--) SAVAGE(0): No suitable BIOS mode found for 960x600 59Hz.
[    25.353] (II) SAVAGE(0): Not using default mode "960x600" (no mode of this name)
[    25.353] (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size)
[    25.353] (--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz.
[    25.353] (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
[    25.353] (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size)
[    25.353] (--) SAVAGE(0): Chose mode 117 at 60Hz.
[    25.353] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[    25.353] (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size)
[    25.353] (--) SAVAGE(0): Chose mode 117 at 75Hz.
[    25.353] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[    25.353] (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size)
[    25.353] (--) SAVAGE(0): Chose mode 117 at 85Hz.
[    25.353] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[    25.354] (--) SAVAGE(0): Chose mode 117 at 100Hz.
[    25.354] (II) SAVAGE(0): Not using driver mode "1024x768" (hsync out of range)
[    25.354] (--) SAVAGE(0): Chose mode 114 at 60Hz.
[    25.354] (--) SAVAGE(0): Chose mode 114 at 60Hz.
[    25.354] (--) SAVAGE(0): Chose mode 111 at 60Hz.
[    25.354] (--) SAVAGE(0): Chose mode 143 at 72Hz.
[    25.354] (--) SAVAGE(0): Chose mode 143 at 72Hz.
[    25.354] (--) SAVAGE(0): Chose mode 133 at 72Hz.
[    25.354] (WW) SAVAGE(0): Shrinking virtual size estimate from 1024x768 to 800x600
[    25.354] (--) SAVAGE(0): Virtual size is 800x600 (pitch 800)

zwieblum · 18 Feb. 2016

Hast du schon "xrandr" probiert?

$ xrandr --output LVDS --mode 1024x768
$ xrandr --output LVDS --mode 1024x768 --rate 43

exc64user · 18 Feb. 2016

da kommt bei mit die Meldung:

xrandr: Failed to get size of gamma for output default
warning: output LVDS not found; ignoring

zwieblum · 18 Feb. 2016

Nu, probier mal:

Code:

$ xrandr

dann kommt eine Liste wie die da:

Code:

Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 8192 x 8192
LVDS1 connected 1600x1200+0+0 (normal left inverted right x axis y axis) 304mm x 228mm
   1600x1200     60.00*+  50.00  
   1600x1024     60.17  
   1400x1050     59.98  
   1280x1024     60.02  
   1440x900      59.89  
   1280x960      60.00  
   1360x768      59.80    59.96  
   1152x864      60.00  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       60.00    59.94  
VGA1 disconnected (normal left inverted right x axis y axis)
DVI1 disconnected (normal left inverted right x axis y axis)

Bei mir wär's also LVDS1 statt LVDS

blafoo · 19 Feb. 2016

Ich habs mal nach LInux verschoben.

@Zwieblum, es gibt eine Code-Funktion, die sorgt dafür das man z.B. Konsolenausgaben besser lesen kann:

Code:

Blablub

Einfach ein [ code] TEXT [ /code] davor u. dahinter

(Ohne Leerzeichen)

Grüße

zwieblum · 19 Feb. 2016

ah ja .. korrigiert

exc64user · 19 Feb. 2016

Hi Leute

nun ich habe mal xrandr ausgeführt und es kam diese Ausgabe:

Code:

 xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
   800x600       60.00*   56.00  
   640x480       60.00  
   400x300       60.00    56.00  
   320x240       60.00

da ist einiges im argen auweia

zwieblum · 19 Feb. 2016

Ok .. da wirst du dir wohl deine xorg.conf handschnitzen müssen. Xorg beenden, dann:

Code:

# Xorg -configure

In der Config gibt's dann in die Section "Monitor":

Code:

Section "Monitor"
  HorizSync   ...
  VertRefresh  ...
EndSection


In deinem Logfile steht:
[code]
[    25.346] (II) SAVAGE(0): <default monitor>: Using hsync range of 31.50-47.30 kHz
[    25.346] (II) SAVAGE(0): <default monitor>: Using vrefresh range of 56.00-59.87 Hz
[    25.346] (II) SAVAGE(0): <default monitor>: Using maximum pixel clock of 56.00 MHz
[    25.346] (II) SAVAGE(0): Estimated virtual size for aspect ratio 1.3333 is 1024x768
[    25.347] (II) SAVAGE(0): Clock range:  10.00 to 250.00 MHz

Ergo: Clock ist mit 56 MHz bei dem erhannten Monitor auf 56MHz beschrenkt, obwohl sie mehr kann.
Also "VertRefresh" ("Monitor") Untergrenze auf 40 einstellen und die HorizSync Obergrenze auf 80 anheben.

Oder du probierst zuerst, ob eine der anderen Live-Distributionen dir eine korrekte Auflösung liefert, dann kannst du die natürlich 1:1 übernehmen. Ich würd' in dieser Reihenfolge durch ausprobieren:
- Debian squeeze (ja ja ja)
- Ubuntu (die aktuelle)
- Arch Linux
- OpenBSD

exc64user · 19 Feb. 2016

so, ich habe mir mal eine xorg.conf gebastelt und würde mal wissen ob die so ok wäre
ich habe herrausgefunden, das als DMA AGP verwendet wird nur der T22 hat kein AGP (laut Bios) also muss ich den DMA Type auf PCI stellen. Auch macht das Modul DRI Probleme laut der Xorg.log
Bin mir nur noch nicht sicher ob die Farbtiefe bei 24 oder 16 liegt.
Die Modeline für 1024x768 habe ich mit dem tool cvt in der Konsole in Erfahrung gebracht.

Code:

# Xorg.conf Datei für einen IBM Thinkpad T22 auf Debian 8.3 Jessie

Section "Device"
     Identifier       "S3 Inc.86C270-294 Savage/IX-MV"
     Driver           "savage"
     BusID            "PCI:1:0:0"
     Option "DmaType" "PCI"
     Option "BusType" "PCI"
EndSection

Section "Monitor"
     Identifier       "Configured Monitor"
     HorizSync 32.0-47.0
     VertRefresh 40.0-60.0
     Modeline "1024x768_60.00" 63.50  1024 1072 1176 1328  768 771 775 798  
EndSection

 
Section "Screen"
     Identifier       "Default Screen"
     Monitor          "Configured Monitor"
     Device           "S3 Inc.86C270-294 Savage/IX-MV"
     DefaultDepth      24
     Subsection "Display"
     Depth             24
     Modes             "1024x768"
     EndSubsection
EndSection


Section "Module"

         Disable "dri"

EndSection

zwieblum · 19 Feb. 2016

testen mit:

Code:

Xorg -config <filename>

funktioniert's? Wenn nicht, bitt um das Logfile

EDIT: Sehe grad' die Modeline .. du musst VertRefresh ein bischen raufdrehen, etwa so:

Code:

VertRefresh 40.0-70.0

exc64user · 19 Feb. 2016

bist Du dir sicher das hsync auf 80 khz soll/kann ?
laut cvt bin ich da bei ca 48 khz
allerdings würde es eine Fehlermeldung der Xorg.log erklären

Code:

SAVAGE(0): Configured Monitor: Using hsync range of 32.00-47.00 kHz
[    27.584] (II) SAVAGE(0): Configured Monitor: Using vrefresh range of 40.00-60.00 Hz
[    27.584] (II) SAVAGE(0): Configured Monitor: Using maximum pixel clock of 56.00 MHz
[    27.584] (II) SAVAGE(0): Clock range:  10.00 to 250.00 MHz
[    27.584] (--) SAVAGE(0): Chose mode 117 at 60Hz.
[    27.584] (II) SAVAGE(0): Not using mode "1024x768_60" (hsync out of range)

zwieblum · 19 Feb. 2016

Probier's einfach mal so wie du's hast. Wenns nicht geht gibt dir das Logfile sowieso Auskunft

Ausserdem, was soll schon schiefgehen? CRT ist ja keiner dran ...

exc64user · 19 Feb. 2016

habe die hsync nun auf 80 khz nun ist der fehler hsync out of range weg
dafür habe ich einen anderen naja ich nähere mich so langsam:cursing:

Code:

SAVAGE(0): Configured Monitor: Using hsync range of 32.00-80.00 kHz
[    26.168] (II) SAVAGE(0): Configured Monitor: Using vrefresh range of 40.00-60.00 Hz
[    26.168] (II) SAVAGE(0): Configured Monitor: Using maximum pixel clock of 56.00 MHz
[    26.168] (II) SAVAGE(0): Clock range:  10.00 to 250.00 MHz
[    26.168] (--) SAVAGE(0): Chose mode 117 at 60Hz.
[    26.168] (II) SAVAGE(0): Not using mode "1024x768_60" (mode clock too high)

zwieblum · 19 Feb. 2016

Nur Mut! probier mal

Code:

man savage

Da gibt's vielversprechende Optionen für die "Device"-Section, die da würd' ich als erstes ausprobieren:

Code:

Option "UseBIOS" "True" 
              This generally produces the  best  results  with  the
              mobile  chips  (/MX and /IX), since the BIOS knows how to handle
              the critical but unusual timing requirements of the various  LCD
              panels  supported  by the chip.

oder auch die folgenden:

Code:

Option "IgnoreEDID" "True"
Option "LCDClock" ...

Hach, das waren noch Zeiten damals im letzten Jahrtausend ...

exc64user · 19 Feb. 2016

das kannste aber laut sagen opensuse 10.3 oder 11.4 war superstabil auf meinem t22 und sogar recht schnell
auch das debian 7.9 wheezy war erstaunlich gut und hat nie rumgezickt.Das war aber nur das letzte Jahrzehnt:thumbup:
Na dann werd ich mal ein paar optionen probieren
ich melde mich wenn es läuft

- - - Beitrag zusammengeführt - - -

Hurra Leute

lasst die Korken knallen ich habe es geschafft:thumbsup:
anbei meine händisch selbst erstellte xorg.conf für den T22 mit Debian 8.3 Jessie
Das Modul dri musste ich deaktivieren. Um es zu nutzen muss ich den Xserver aus den Quellen neu mit bestimmten Optionen Kompilieren.
Auch das acpi kann da Probleme machen. Muss also noch ein wenig "Finetuning" machen aber fürs erste bin ich einen grossen Schritt weiter.

Code:

# Xorg.conf Datei für einen IBM Thinkpad T22 auf Debian 8.3 Jessie

Section "Device"
     Identifier       "S3 Inc.86C270-294 Savage/IX-MV"
     Driver           "savage"
     BusID            "PCI:1:0:0"
     Option "ModeValidation" "NoMaxPClkCheck"
EndSection

Section "Monitor"
     Identifier       "Configured Monitor"
     Option "DPMS"
     HorizSync 28.0-70.0
     VertRefresh 43.0-60.0
     ModeLine "1024x768" 56.00  1024 1072 1176 1328  768 771 775 798   
EndSection

 
Section "Screen"
     Identifier       "Default Screen"
     Monitor          "Configured Monitor"
     Device           "S3 Inc.86C270-294 Savage/IX-MV"
     DefaultDepth      16
     Subsection "Display"
     Depth             16
     Modes             "1024x768" 
     EndSubsection
EndSection


Section "Module"

         Disable "dri"

EndSection

zwieblum · 20 Feb. 2016

Gratuliere :thumbsup:

exc64user · 20 Feb. 2016

So, die Auflösung habe ich jetzt aber die Fenster sind sehr langsam beim verschieben im Verhältnis zu Wheezy wo es recht schnell ging.
Welche Ursache könnte dies haben? Vermute das es an einem Modul liegt aber nicht an welchen.

zwieblum · 20 Feb. 2016

Kommenter' mal das da aus: "Disable "dri""

Und schau mal da: https://wiki.archlinux.org/index.php/Savage
FreeBSD hätte übrigens gerne diese Optionen:

Code:

Option "NoAccel" "true"
Option "ShadowFB" "true"
Option "DisableTile" "true"

exc64user · 20 Feb. 2016

Danke für den Tipp
Hab das mal in die conf eingearbeitet und rebootet aber keine Änderung bis jetzt
bei den optionen wo ich mir noch unsicher bin habe ich auskommentiert.

Code:

Section "Device"
     Identifier         "S3 Inc.86C270-294 Savage/IX-MV"
     Driver             "savage"
     BusID              "PCI:1:0:0"
    #Option "ModeValidation" "NoMaxPClkCheck"
     Option            "NoAccel" "True"
     Option        "ShadowFB" "Enable"
     Option             "DisableCOB" "false"
    #Option        "NoPciBurst" "Enable"
    #Option        "FramebufferWC"
EndSection

- - - Beitrag zusammengeführt - - -

Habe gerade gesehen, das in der Xorg.conf eine Warnung steht was das Modul dri angeht. Dri habe ich wieder aktiviert.
So wie ich das sehe ist dri nicht aktiv weil wohl noch ein paar Probleme gibt.

Code:

(WW) SAVAGE(0): Direct Rendering requires the COB -- Set Option "DisableCOB" "false"
[    26.151] (EE) SAVAGE(0): DRI isn't enabled
[    26.151] (--) SAVAGE(0): Chose mode 117 at 60Hz.
[    26.227] (==) SAVAGE(0): Backing store enabled
[    26.233] (WW) SAVAGE(0): Direct rendering disabled

Auch die Ausgabe von xrandr gibt mir noch zu denken

Code:

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
   1024x768      53.00* 
   800x600       60.00    56.00  
   640x480       60.00  
   512x384       60.00  
   400x300       60.00    56.00  
   320x240       60.00

zwieblum · 21 Feb. 2016

Nu, dann mach' mal was der savage treiber vorschlägt:

Code:

Option "DisableCOB" "false"

Was stört dich am xrandr-output? Du kannst natürlich die "Monitor"-Section etwas erleichterst und die Option in der "Device"-Section setzt, vielleicht schaut's dann schöner aus:

Code:

Option "UseBIOS" "True"

Code:

Section "Monitor"      Identifier       "Configured Monitor"      
  Option "DPMS"      
  #HorizSync 28.0-70.0      
  #VertRefresh 43.0-60.0      
  #ModeLine "1024x768" 56.00  1024 1072 1176 1328  768 771 775 798    
EndSection

Debian Jessie auf T22

New member

Well-known member

New member

Well-known member

Moderator

Well-known member

New member

Well-known member

New member

Well-known member

New member

Well-known member

New member

Well-known member

New member

Well-known member

New member

Well-known member

New member

Well-known member

Werbung