Follow along with the video below to see how to install our site as a web app on your home screen.
Anmerkung: This feature may not be available in some browsers.
YUMI:
Other Notes: If MultibootISOs was previously used, you must reformat the drive and start over.
Das ist z.B. bei XBOOT nicht notwendig - es ergänzt einfach den Eintrag in der menu.lst
menuentry "MS-DOS 8 Boot Disk" {
linux16 /memdisk bigraw
initrd16 /boot_dos.ima
}
Von wegen überholt! Die Anleitung erklärt ausführlich, wie ein Multiboot-Stick erstellt werden kann und vermittelt dem Leser das nötige Wissen, um beliebige Abbilder zu booten. Man muss lediglich die richtigen Boot-Parameter herausfinden und schon kann es losgehen. Ich nutze selbst GRUB2 auf dem USB-Stick und bin froh, dass ich mich nun nicht mehr auf irgendwelche komische Tools verlassen muss, die nur mit den vom Entwickler getesteten ISOs funktionieren und auch dass nicht immer. Aber gut, jeder soll natürlich verwenden, was ihm am besten zusagt.Hallo, hier auch ein Interessanter Artikel, ab Seite 11:
http://www.freiesmagazin.de/ftp/2010/freiesMagazin-2010-10.pdf
So richtig neues aber auch nicht und irgendwie überholt.
boot
floppy.img
grub4dos
memdisk
SeaToolsDOS223ALL.ISO
ubcd511.iso
set timeout=10
set default=1
menuentry "Ubuntu 10.4.3 i386" {
loopback loop /ubuntu-10.04.3-desktop-i386.iso
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/ubuntu-10.04.3-desktop-i386.iso splash --
initrd (loop)/casper/initrd.lz
}
menuentry "MS-DOS 8 Boot Disk" {
linux16 /memdisk bigraw
initrd16 /floppy.img
}
menuentry "SeaTools" {
loopback loop /SeaToolsDOS223ALL.ISO
linux16 /memdisk
initrd16 (loop)/SeaTools.ima
}
menuentry "GRUB4DOS" {
linux16 /grub4dos/grub.exe --config-file=/grub4dos/menu.lst bigraw
}
color blue/green yellow/red white/magenta white/magenta
timeout 30
default 0
title Ultimate Boot CD ISO 5.11
fallback 8
find --set-root /ubcd511.iso
map /ubcd511.iso (0xff) || map --mem /ubcd511.iso (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2
title MSDOS-8 Image
map /floppy.img (fd0)
map --hook
chainloader (fd0)+1
rootnoverify (fd0)
map --floppies=1
title commandline
commandline
title floppy (fd0)
chainloader (fd0)+1
rootnoverify (fd0)
title back to dos
quit
title reboot
reboot
title halt
halt
menuentry "clonezilla-live-1.2.10-14-amd64.iso" {
set isofile="/boot/iso/clonezilla-live-1.2.10-14-amd64.iso"
loopback loop $isofile
linux (loop)/live/vmlinuz boot=live live-config noswap nolocales edd=on nomodeset ocs_live_run=\"ocs-live-general\" ocs_live_extra_param=\"\" ocs_live_keymap=\"\" ocs_live_batch=\"no\" ocs_lang=\"\" noprompt gfxpayload=800x600x16, 800x600 toram=filesystem.squashfs ip=frommedia nosplash findiso=$isofile
initrd (loop)/live/initrd.img
}
menuentry "Acronis TrueImage 2011" {
set isofile=/boot/iso/ATI2011Build6597.iso
loopback loop $isofile
linux (loop)/Recovery\ Manager/kernel.dat quiet mbrcrcs=on findiso=$isofile
initrd (loop)/Recovery\ Manager/ramdisk.dat /s
}
menuentry "Acronis TrueImage 2011" {
set isofile=/boot/iso/ATI2011Build6597.iso
loopback loop $isofile
linux (loop)/Recovery\ Manager/kernel.dat quiet vga=788 mbrcrcs=on findiso=$isofile
initrd (loop)/Recovery\ Manager/ramdisk.dat /s
}
Hallo,
leider kann ich dir nicht helfen.
Aber durch deine Anleitung habe ich auch mal versucht das über Grub2 zu booten. Bin schon seit 2 Stunden dabei und habe es auch geschafft.
Es wird gebootet aber dann bekomme ich eine Fehlermeldung, dass es sich nur um eine Testversion handelt.
Ich habe aber eine gültige Seriennummer und habe die Iso-Datei von Acronis aus dem Kundenbereich heruntergeladen. Die Iso geht, wenn ich davon boote und mein System sichere.
Hast du das Problem auch oder mache ich hier noch was falsch?
Ich nutzte True Image Home 2011 !
Gruß Jens
PS: Geht es bei dir nun?
Hello Mathieu,
Thank you for posting and I would like to welcome you to our forum. I will definitely help you with this.
The reason for this issue is that the initial ramdisk.dat file taken from the Acronis directory does not have the program serial number. The serial number is accessed from Acronis Bootable Media creator and the newly created bootable files, such as ramdisk.dat have it.
I will send you a private message in a few minutes with the correct files, but as a workaround, in case there is no support available, you can create the bootable media and save it as an ISO file, then extract its components with any ISO extracting utility.
Please let me know if you have additional questions or any other issues.
Thank you.
6. If your grub is 2.x (grub-pc), e.g. on Debian Squeeze or Ubuntu 9.10, edit /etc/grub.d/40_custom, make it like:
================================================
menuentry "Clonezilla" {
set root=(hd0,4)
linux /live-hd/vmlinuz boot=live live-config noswap nolocales edd=on nomodeset ocs_live_run=\"ocs-live-general\" ocs_live_extra_param=\"\" ocs_live_keymap=\"\" ocs_live_batch=\"no\" ocs_lang=\"\" vga=788 ip=frommedia nosplash live-media-path=/live-hd bootfrom=/dev/sda4 toram=filesystem.squashfs
initrd /live-hd/initrd.img
}
================================================
//NOTE//
In grub2, (hd0,4) means the first harddrive and the 4th partition. It's different from that in grub version 1. Then run "update-grub2" to update your grub2 config. (Thanks to Louie Chen for providing this).
Remember to put back slash \ before " for the boot parameters in grub 2. Otherwise it won't shown in /proc/cmdline, then some actions of Clonezilla won't work.
Besides, you can use only the Clonezilal live iso file in grub2 (Thanks to the patches files from grml). For example, put clonezilla-live-1.2.6-24.iso in dir /home/isos/, then make the grub2 custom menu (/etc/grub.d/40_custom) like:
================================================
menuentry "Clonezilla live" {
set isofile="/home/isos/clonezilla-live-1.2.6-24.iso"
loopback loop $isofile
linux (loop)/live/vmlinuz boot=live live-config noswap nolocales edd=on nomodeset ocs_live_run=\"ocs-live-general\" ocs_live_extra_param=\"\" ocs_live_keymap=\"\" ocs_live_batch=\"no\" ocs_lang=\"\" vga=788 ip=frommedia nosplash toram=filesystem.squashfs findiso=$isofile
initrd (loop)/live/initrd.img
}
================================================
Then run "update-grub2" to update your grub2 config.
//NOTE//:
Here we assign "live-media-path=/live-hd" since the files are not put in the default path (live). We force to use "bootfrom=/dev/sda4" (files are on /dev/sda4) so that if there is another Clonezilla live on your CD drive (e.g. /dev/hdc), the live initramfs wont's find the wrong files from your CD drvie. An extra param "toram=filesystem.squashfs" is added so that later later you can mount /dev/sda4 as clonezilla image dir if you want. If you want live-initramfs to copy all the files in /dev/sda4 to memory, you can use "toram" (not "toram=filesystem.squashfs") only. This is useful when you have some customized files you need in /dev/sda4/.
Remember to check kernel and initrd file names and the parameters in syslinux/syslinux.cfg from the zip file, copy them to here. It might be different from here, say vmlinuz path, username and hostname maybe different.
If you do not change the dir name from "live" to "live-hd" in the above, you might encounter a problem when you have a version of Clonezilla live on harddrive and you want to boot your Clonezilla live CD or USB flash drive. There are some discussions about this. Check:
https://sourceforge.net/tracker2/?func=detail&atid=671650&aid=2202156&group_id=115473
http://drbl.org/faq/fine-print.php?...shfs.faq#34_2_or_more_filesystem_squashfs.faq
menuentry "clonezilla-live-1.2.10-14-amd64.iso zxz" {
set isofile="/boot/iso/clonezilla-live-1.2.10-14-amd64.iso"
loopback loop $isofile
linux (loop)/live/vmlinuz boot=live live-config noswap edd=on nomodeset ocs_live_run=\"ocs-live-general\" ocs_live_extra_param=\"\" ocs_live_keymap="/usr/share/keymaps/i386//qwertz/de-latin1-nodeadkeys.kmap.gz" ocs_lang="de_DE.UTF-8" ocs_live_batch=\"no\" noprompt gfxpayload=800x600x16, 800x600 toram=filesystem.squashfs ip=frommedia nosplash findiso=$isofile
initrd (loop)/live/initrd.img
}
### MENU START
title atihom2011Build6597\n
ls /images/atihome.iso || find --set-root /images/atihome.iso
map --heads=0 --sectors-per-track=0 /images/atihome.iso (0xff) || map --heads=0 --sectors-per-track=0 --mem /images/atihome.iso (0xff)
map --hook
chainloader (0xff)
### MENU END
menuentry "clonezilla-live-1.2.11-23-amd64.iso zxz" {
set isofile="/boot/iso/clonezilla-live-1.2.11-23-amd64.iso"
loopback loop $isofile
linux (loop)/live/vmlinuz boot=live live-config noswap edd=on nomodeset ocs_live_run=\"ocs-live-general\" ocs_live_extra_param=\"\" ocs_live_keymap="/usr/share/keymaps/i386//qwertz/de-latin1-nodeadkeys.kmap.gz" ocs_lang="de_DE.UTF-8" ocs_live_batch=\"no\" noprompt gfxpayload=800x600x16, 800x600 toram=filesystem.squashfs ip=frommedia nosplash findiso=$isofile
initrd (loop)/live/initrd.img
}
Meines Wissens ist Knoppix wirklich das einzige ISO-Abbild, welches mit GRUB2 partout nicht geht. Für DOS-basierte Sachen gibts ja auch grub4dos
http://www.giantbomb.com/profile/mercanis/booting-iso-files-directly-from-usb/30-78639/
Hab ich aber nicht ausprobiert, da ich mittlerweile außer Ubuntu, Clonezilla und einem DOS-Floppy-Image nichts mehr brauche.
Edit: Hab mal UBCD über grub4dos (grub4dos-0.4.4.zip) getestet -> geht:
Code:boot floppy.img grub4dos memdisk SeaToolsDOS223ALL.ISO ubcd511.iso
boot/grub/grub.cfg
Code:set timeout=10 set default=1 menuentry "Ubuntu 10.4.3 i386" { loopback loop /ubuntu-10.04.3-desktop-i386.iso linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/ubuntu-10.04.3-desktop-i386.iso splash -- initrd (loop)/casper/initrd.lz } menuentry "MS-DOS 8 Boot Disk" { linux16 /memdisk bigraw initrd16 /floppy.img } menuentry "SeaTools" { loopback loop /SeaToolsDOS223ALL.ISO linux16 /memdisk initrd16 (loop)/SeaTools.ima } menuentry "GRUB4DOS" { linux16 /grub4dos/grub.exe --config-file=/grub4dos/menu.lst bigraw }
grub4dos/menu.lst
Code:color blue/green yellow/red white/magenta white/magenta timeout 30 default 0 title Ultimate Boot CD ISO 5.11 fallback 8 find --set-root /ubcd511.iso map /ubcd511.iso (0xff) || map --mem /ubcd511.iso (0xff) map --hook chainloader (0xff) savedefault --wait=2 title MSDOS-8 Image map /floppy.img (fd0) map --hook chainloader (fd0)+1 rootnoverify (fd0) map --floppies=1 title commandline commandline title floppy (fd0) chainloader (fd0)+1 rootnoverify (fd0) title back to dos quit title reboot reboot title halt halt
Hallo Myon,
wie hast Du das konkret mit dem grub4dos gemacht?
Ich möchte von Grub2 grub4dos nutzen, um z. B. das UBCD iso booten zu können.
---> http://www.ultimatebootcd.com/forums/viewtopic.php?f=10&t=2541
----> https://forums.hak5.org/index.php?/...;-grub2-backgrounds-and-example-config-files/
Nur verstehe ich das nicht.
Wie bekomme ich Syslinux auf den USB Stick um Syslinux mit Grub2 per Chainloading booten zu können?
MfG
xsid
menuentry "GRUB4DOS" {
linux16 /grub4dos/grub.exe --config-file=/grub4dos/menu.lst bigraw
}
# This is a sample menu.lst file. You should make some changes to it.
# The old install method of booting via the stage-files has been removed.
# Please install GRLDR boot strap code to MBR with the bootlace.com
# utility under DOS/Win9x or Linux.
color blue/green yellow/red white/magenta white/magenta
timeout 30
default 0
title Ultimate Boot CD 5.26
find --set-root /ubcd526.iso
map /ubcd526.iso (hd32)
map --hook
chainloader (hd32)
title MSDOS-8 Image
map /floppy.img (fd0)
map --hook
chainloader (fd0)+1
rootnoverify (fd0)
map --floppies=1
title commandline
commandline
title floppy (fd0)
chainloader (fd0)+1
rootnoverify (fd0)
title back to dos
quit
title reboot
reboot
title halt
halt
If you compiled from source and don't have grub.exe or simply prefer to use memdisk,
all that needs to be done is to use memdisk from syslinux as the kernel like this;
menuentry "Grub4Dos" {
linux16 /boot/grub/memdisk
initrd16 /boot/grub/grldr
}
I got memdisk from /usr/lib/syslinux and placed it in my usb's /boot/grub/ directory.
This works great. So now we can even load Grub4Dos from Grub2!
Hallo Myon,
genau so will ich es haben, danke.
Mein Du man bekommt das auch ohne exe-Datei irgenwie hin?
Hierbei fallen mir die Begriffe, memdisk und dldr ein.
Hier ist das beschrieben, nur mache ich irgendwas falsch.
https://forums.hak5.org/index.php?/...;-grub2-backgrounds-and-example-config-files/
Wo liegt die "menu.lst"?
Wo muß das Folder "grub4dos" liegen?
grub4dos wird bei mir über grub2 geladen. D.h. ich hab mir
http://download.gna.org/grub4dos/grub4dos-0.4.4.zip
heruntergeladen [B]auf den Stick nach grub4dos entpackt[/B] und
sudo mount /dev/sdb1 /mnt/ -o uid=xsid,gid=users
sudo grub-install --no-floppy --root-directory=/mnt /dev/sdb
Installation finished. No error reported.
sync
sudo umount /mnt
sudo qemu-system-x86_64 -m 1599 -hda /dev/sdb
Ich hab es so gemacht wie von mir oben beschrieben, mit grldr und ohne grub.exe. Das geht und das reicht mir auch.
menuentry "GRUB4DOS" {
linux16 /grub4dos/grub.exe --config-file=/grub4dos/menu.lst bigraw
}
Die Firmware die das virtuelle Laufwerk emuliert kann wohl nur von fat- und ntfs-Dateisystemen lesen und unterstützt auch kein gpt [1]. Ich denke das sollte man im Zusammenhang mit "kann sie problemlos gebootet werden" beim Kauf im Hinterkopf behalten.Schön, dass es bei dir auch geklappt hat. Ich persönlich liebäugle aber schon seit langem mit Zalman ZM-VE300 (externe Festplatte mit eingebautem virtuellen CD/DVD-Laufwerk)
Da reicht es, die ISO-Datei einfach auf die Platte zu kopieren und schon kann sie problemlos gebootet werden. Ganz ohne grub und Konsorten. Vielleicht schenke ich mir das Ding zu Weihnachten