Hab folgendes auf der Herstellerseite von Lenovo gefunden:
Symptom
Customers have reported that during normal usage switching between tablet and notebook modes, that the LCD bezel separates from the LCD leaving a visible gap or space between the LCD and bezel. The separation does not affect the operation of the unit.
Affected configurations
Any of the following systems running on Microsoft Windows Vista and XP with SXGA+ LCD models:
• ThinkPad X61 Tablet
Solution
Customer should contact service provider for warranty replacement of the LCD bezel. The cause of the separation is that the SXGA+ (high resolution displays) are thinner than the XGA panels systems. Servicers must replace LCD bezel with new FRU parts - bezel contains the correct tape thickness and requires one hour of cure time.
X61 Tablet updated LCD bezel FRU PN are:
No Finger Print reader - 42W3398
Finger Print reader - 42W3399
Quelle: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68984
Hatte bereits vor ca. 5 Monaten mein X61t diesbezüglich eingeschickt. Das Problem bestand aber nach wie vor… Seit diesem Monat gibt es nun eine überarbeitete Konstruktion des Rahmens. Ich habe mein Notebook soeben versandfertig gemacht Mein Rahmen war sogar an 3 Stellen leicht eingerissen...
Gruß,
Martin
Symptom
Customers have reported that during normal usage switching between tablet and notebook modes, that the LCD bezel separates from the LCD leaving a visible gap or space between the LCD and bezel. The separation does not affect the operation of the unit.
Affected configurations
Any of the following systems running on Microsoft Windows Vista and XP with SXGA+ LCD models:
• ThinkPad X61 Tablet
Solution
Customer should contact service provider for warranty replacement of the LCD bezel. The cause of the separation is that the SXGA+ (high resolution displays) are thinner than the XGA panels systems. Servicers must replace LCD bezel with new FRU parts - bezel contains the correct tape thickness and requires one hour of cure time.
X61 Tablet updated LCD bezel FRU PN are:
No Finger Print reader - 42W3398
Finger Print reader - 42W3399
Quelle: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68984
Hatte bereits vor ca. 5 Monaten mein X61t diesbezüglich eingeschickt. Das Problem bestand aber nach wie vor… Seit diesem Monat gibt es nun eine überarbeitete Konstruktion des Rahmens. Ich habe mein Notebook soeben versandfertig gemacht Mein Rahmen war sogar an 3 Stellen leicht eingerissen...
Gruß,
Martin