Follow along with the video below to see how to install our site as a web app on your home screen.
Anmerkung: This feature may not be available in some browsers.
root@debian:/home# tlp stat
--- TLP 0.7 --------------------------------------------
+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
[ 18.633866] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 136.301798] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
Jetzt wo du es erwähnst: im Installationskapitel steht auch gar nichts von F22 ...ah ok hatte schon an mir gezweifelt das ich was übersehen hatte
[~] rpm -qa | grep -i smapi
kmod-tp_smapi-4.0.4-301.fc22.x86_64-0.41-1.fc22.x86_64
akmod-tp_smapi-0.41-1.fc22.x86_64
kmod-tp_smapi-4.0.4-303.fc22.x86_64-0.41-1.fc22.x86_64
tp_smapi-0.41-1.noarch
[~] sudo tlp stat
--- TLP 0.7 --------------------------------------------
+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
DISK_DEVICES="sda"
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
WOL_DISABLE=Y
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_BAT=1
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
RUNTIME_PM_ALL=1
USB_AUTOSUSPEND=1
USB_BLACKLIST_WWAN=1
RESTORE_DEVICE_STATE_ON_STARTUP=0
DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wwan"
DEVICES_TO_ENABLE_ON_STARTUP="wifi"
START_CHARGE_THRESH_BAT0=70
STOP_CHARGE_THRESH_BAT0=97
DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi"
DEVICES_TO_DISABLE_ON_DOCK="wwan wifi"
DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+++ System Info
System = LENOVO ThinkPad X201 Tablet 2985ETG
BIOS = 6QET70WW (1.40 )
Release = "Fedora release 22 (Twenty Two)"
Kernel = 4.0.4-303.fc22.x86_64 x86_64
/proc/cmdline = BOOT_IMAGE=/vmlinuz-4.0.4-303.fc22.x86_64 root=UUID=cd73dcbe-3415-4062-8190-a089018c9651 ro rhgb quiet rd.md=0 rd.lvm=0 rd.dm=0 FONT=latarcyrheb-sun16 rd.luks=0 LANG=de_DE.UTF-8 KEYMAP=de-latin1-nodeadkeys libata.force=80c raid=noautodetect video.use_native_backlight=0
Init system = systemd
+++ System Status
TLP power save = enabled
***Warning: tlp-sleep.service is not enabled -- invoke "systemctl enable tlp-sleep.service" to correct this!
power source = battery
+++ Processor
CPU Model = Intel(R) Core(TM) i7 CPU L 640 @ 2.13GHz
/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = acpi-cpufreq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 1199000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 2133000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 2134000 2133000 1999000 1866000 1733000 1599000 1466000 1333000 1199000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = acpi-cpufreq
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 1199000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 2133000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies = 2134000 2133000 1999000 1866000 1733000 1599000 1466000 1333000 1199000 [kHz]
/sys/devices/system/cpu/cpufreq/boost = 1
x86_energy_perf_policy: unsupported CPU.
/proc/sys/kernel/nmi_watchdog = 0
+++ Undervolting
PHC kernel not available.
+++ Temperatures
/proc/acpi/ibm/thermal = 49 0 0 0 0 0 0 0 [°C]
/proc/acpi/ibm/fan = 3221 [/min]
+++ File System
/proc/sys/vm/laptop_mode = 2
/proc/sys/vm/dirty_writeback_centisecs = 6000
/proc/sys/vm/dirty_expire_centisecs = 6000
/proc/sys/vm/dirty_ratio = 20
/proc/sys/vm/dirty_background_ratio = 10
/proc/sys/fs/xfs/age_buffer_centisecs = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs = (not available)
+++ Storage Devices
/dev/sda:
Model = INTEL SSDSA2M160G2GC
Firmware = 2CV102M3
APM Level = none/disabled
Status = active/idle
TRIM = supported
Scheduler = cfq
SMART info:
4 Start_Stop_Count = 0
5 Reallocated_Sector_Ct = 1
9 Power_On_Hours = 11667 [h]
225 Host_Writes_32MiB = 4.836 [TB]
232 Available_Reservd_Space = 100 [%]
233 Media_Wearout_Indicator = 100 [%]
+++ SATA Aggressive Link Power Management
/sys/class/scsi_host/host0/link_power_management_policy = min_power
/sys/class/scsi_host/host1/link_power_management_policy = min_power
/sys/class/scsi_host/host2/link_power_management_policy = min_power
/sys/class/scsi_host/host3/link_power_management_policy = min_power
/sys/class/scsi_host/host4/link_power_management_policy = min_power
/sys/class/scsi_host/host5/link_power_management_policy = min_power
+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)
+++ Intel Graphics
/sys/module/i915/parameters/powersave = 1 (enabled)
/sys/module/i915/parameters/enable_rc6 = 0 (disabled)
/sys/module/i915/parameters/enable_fbc = -1 (use per-chip default)
/sys/module/i915/parameters/lvds_downclock = 0 (disabled)
/sys/module/i915/parameters/semaphores = -1 (use per-chip default)
+++ Wireless
bluetooth = none (no device)
wifi = on
wwan = none (no device)
wlan0(iwlwifi) : connected, power management = on
+++ Audio
/sys/module/snd_hda_intel/parameters/power_save = 1
/sys/module/snd_hda_intel/parameters/power_save_controller = Y
+++ Docks and Device Bays
/sys/devices/platform/dock.0: battery_bay = no battery
/sys/devices/platform/dock.1: ata_bay = no drive (or powered off)
/sys/devices/platform/dock.2: dock_station = undocked
+++ Runtime Power Management
device classes = all
device blacklist = (not configured)
driver blacklist = (not configured)
/sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, agpgart-intel)
/sys/bus/pci/devices/0000:00:02.0/power/control = auto (0x030000, VGA compatible controller, i915)
/sys/bus/pci/devices/0000:00:16.0/power/control = auto (0x078000, Communication controller, mei_me)
/sys/bus/pci/devices/0000:00:19.0/power/control = auto (0x020000, Ethernet controller, e1000e)
/sys/bus/pci/devices/0000:00:1a.0/power/control = auto (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1b.0/power/control = auto (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1c.0/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.3/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.4/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1d.0/power/control = auto (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1e.0/power/control = auto (0x060401, PCI bridge, no driver)
/sys/bus/pci/devices/0000:00:1f.0/power/control = auto (0x060100, ISA bridge, lpc_ich)
/sys/bus/pci/devices/0000:00:1f.2/power/control = auto (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:00:1f.3/power/control = auto (0x0c0500, SMBus, i801_smbus)
/sys/bus/pci/devices/0000:00:1f.6/power/control = auto (0x118000, Signal processing controller, intel ips)
/sys/bus/pci/devices/0000:02:00.0/power/control = auto (0x028000, Network controller, iwlwifi)
/sys/bus/pci/devices/0000:ff:00.0/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:ff:00.1/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:ff:02.0/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:ff:02.1/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:ff:02.2/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:ff:02.3/power/control = auto (0x060000, Host bridge, no driver)
+++ USB
autosuspend = enabled
device whitelist = (not configured)
device blacklist = (not configured)
driver blacklist = (not configured)
wwan blacklist = enabled (cdc_acm cdc_wdm cdc_ether hso qcserial sierra)
Bus 002 Device 002 ID 8087:0020 control = auto, autosuspend_delay_ms = 0 -- Intel Corp. Integrated Rate Matching Hub (hub)
Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
Bus 001 Device 003 ID 147e:2016 control = auto, autosuspend_delay_ms = 2000 -- Upek Biometric Touchchip/Touchstrip Fingerprint Sensor (no driver)
Bus 001 Device 002 ID 8087:0020 control = auto, autosuspend_delay_ms = 0 -- Intel Corp. Integrated Rate Matching Hub (hub)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
+++ ThinkPad Extended Battery Functions
tp-smapi = active
tpacpi-bat = inactive (kernel module 'acpi_call' not installed)
+++ ThinkPad Battery Status: BAT0 (Main / Internal)
/sys/devices/platform/smapi/BAT0/manufacturer = SANYO
/sys/devices/platform/smapi/BAT0/model = 42T4658
/sys/devices/platform/smapi/BAT0/manufacture_date = 2013-06-26
/sys/devices/platform/smapi/BAT0/first_use_date = 2014-01-01
/sys/devices/platform/smapi/BAT0/cycle_count = 106
/sys/devices/platform/smapi/BAT0/design_capacity = 66240 [mWh]
/sys/devices/platform/smapi/BAT0/last_full_capacity = 62700 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_capacity = 43660 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_percent = 70 [%]
/sys/devices/platform/smapi/BAT0/remaining_running_time_now = 254 [min]
/sys/devices/platform/smapi/BAT0/remaining_charging_time = not_charging [min]
/sys/devices/platform/smapi/BAT0/power_now = -20351 [mW]
/sys/devices/platform/smapi/BAT0/power_avg = -9012 [mW]
/sys/devices/platform/smapi/BAT0/start_charge_thresh = 70 [%]
/sys/devices/platform/smapi/BAT0/stop_charge_thresh = 97 [%]
/sys/devices/platform/smapi/BAT0/force_discharge = 0
Nach Entnehmen und wieder Einsetzen/sys/devices/platform/dock.1: ata_bay = no drive (or powered off)
/sys/devices/platform/dock.1: ata_bay = drive present
Sieht mir also mehr nach Kernelproblem bei dir aus. Was sagt dmesg nach dem Einschieben?
[945938.247023] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[945938.247027] ata2: irq_stat 0x00000040, connection status changed
[945938.247030] ata2: SError: { DevExch }
[945938.247034] ata2: hard resetting link
[945938.968037] ata2: SATA link down (SStatus 0 SControl 300)
[945943.972063] ata2: hard resetting link
[945944.292064] ata2: SATA link down (SStatus 0 SControl 300)
[945944.292075] ata2: limiting SATA link speed to 1.5 Gbps
[945949.292046] ata2: hard resetting link
[945949.616063] ata2: SATA link down (SStatus 0 SControl 310)
[945949.616073] ata2.00: disabled
[945949.616087] ata2: EH complete
[945949.616096] sr 1:0:0:0: rejecting I/O to offline device
[945949.616099] sr 1:0:0:0: killing request
[945949.616184] ACPI: \_SB_.PCI0.SATA.PRT1: undocking
[945949.616285] sr 1:0:0:0: rejecting I/O to offline device
[945949.616379] sr 1:0:0:0: rejecting I/O to offline device
[945949.617068] ata2.00: detaching (SCSI 1:0:0:0)
[945949.619730] cdrom: issuing MRW background format suspend
[945949.622142] systemd-udevd[9801]: Failed to apply ACL on /dev/sr0: No such file or directory
[945949.622150] systemd-udevd[9801]: Failed to apply ACL on /dev/sr0: No such file or directory
[945949.640736] systemd-udevd[9801]: Failed to apply ACL on /dev/sr0: No such file or directory
[945949.640745] systemd-udevd[9801]: Failed to apply ACL on /dev/sr0: No such file or directory
[946132.849510] ACPI: \_SB_.PCI0.SATA.PRT1: docking
[946132.849691] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen
[946132.849700] ata2: ACPI event
[946132.864029] ata2: hard resetting link
[946133.592109] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[946133.595828] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133
[946133.600531] ata2.00: configured for UDMA/133
[946133.748124] ata2: EH complete
[946133.751305] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5
[946133.858714] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[946133.859716] sr 1:0:0:0: Attached scsi CD-ROM sr0
[946133.860179] sr 1:0:0:0: Attached scsi generic sg3 type 5
[946913.145004] ACPI: \_SB_.PCI0.SATA.PRT1: docking
[946913.145093] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen
[946913.145098] ata2: ACPI event
[946913.160073] ata2: hard resetting link
[946913.888069] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[946913.894161] ata2.00: ATA-8: SAMSUNG 470 Series SSD, AXM09B1Q, max UDMA/133
[946913.894170] ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[946913.895584] ata2.00: configured for UDMA/133
[946913.898088] ata2: EH complete
[946913.898217] scsi 1:0:0:0: Direct-Access ATA SAMSUNG 470 Seri AXM0 PQ: 0 ANSI: 5
[946913.901299] sd 1:0:0:0: [sdf] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[946913.901409] sd 1:0:0:0: [sdf] Write Protect is off
[946913.901414] sd 1:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[946913.901448] sd 1:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[946913.901960] sd 1:0:0:0: Attached scsi generic sg3 type 0
[946913.902902] sdf: sdf1 sdf2
[946913.904617] sd 1:0:0:0: [sdf] Attached SCSI disk