Hoher Stromverbrauch mit Nvidia Optimus

vickoxy · 18 Feb. 2016

Hi,
habe eine Frage. Ich habe gerade auf mein Acer Nitro (VN7-792g) TLP installiert (Ubuntu 15.10). Allerdings ist die Akku-Zeit mit Linux im Keller im Vergleich zum Windows 10. Unter Windows kriege ich bei normaler last problemlos 4,5-5 Stunden und beim Ubuntu 15.10 und TLP etwa 2-2.15.
Gibt es dafür irgendeine Lösung.
Bitte um Verzeihung, wenn ich im Falschem Forum dies poste, da ich kein Thinkpad habe, aber TLP sollte auch andere Rechner unterstützen?
Hier mein tlp-stat:

Code:

linux@linux:~$ sudo tlp-stat
[sudo] Passwort für linux: 
--- TLP 0.8 --------------------------------------------

+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
TLP_DEFAULT_MODE=AC
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=powersave
DISK_DEVICES="sda sdb"
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
WOL_DISABLE=Y
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
RUNTIME_PM_ALL=1
RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau"
USB_AUTOSUSPEND=1
USB_BLACKLIST_WWAN=1
RESTORE_DEVICE_STATE_ON_STARTUP=0

+++ System Info
System         = Acer V1.01 Aspire VN7-792G
BIOS           = V1.01
Release        = Ubuntu 15.10
Kernel         = 4.2.0-27-generic #32-Ubuntu SMP Fri Jan 22 04:49:08 UTC 2016 x86_64
/proc/cmdline  = BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic.efi.signed root=UUID=f210828b-2a9b-4785-8dce-24cb2dda647e ro quiet splash vt.handoff=7
Init system    = systemd

+++ System Status
TLP power save = enabled
power source   = battery

+++ Processor
CPU Model      = Intel(R) Core(TM) i5-6300HQ CPU @ 2.30GHz

/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq  =  3200000 [kHz]

/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq  =  3200000 [kHz]

/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq  =  3200000 [kHz]

/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq  =  3200000 [kHz]

/sys/devices/system/cpu/intel_pstate/min_perf_pct      = 25
/sys/devices/system/cpu/intel_pstate/max_perf_pct      = 100
/sys/devices/system/cpu/intel_pstate/no_turbo          = 0

x86_energy_perf_policy.cpu0                            = powersave
x86_energy_perf_policy.cpu1                            = powersave
x86_energy_perf_policy.cpu2                            = powersave
x86_energy_perf_policy.cpu3                            = powersave

/proc/sys/kernel/nmi_watchdog                          = 0

+++ Undervolting
PHC kernel not available.

+++ Temperatures
CPU temp               =    44 [°C]
Fan speed              = (not available)

+++ File System
/proc/sys/vm/laptop_mode               =     2
/proc/sys/vm/dirty_writeback_centisecs =  6000
/proc/sys/vm/dirty_expire_centisecs    =  6000
/proc/sys/vm/dirty_ratio               =    20
/proc/sys/vm/dirty_background_ratio    =    10
/proc/sys/fs/xfs/age_buffer_centisecs  = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs    = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs     = (not available)

+++ Storage Devices
/dev/sda:
          Model     = Crucial_CT256MX100SSD1                  
          Firmware  = MU01    
          APM Level = 128
          Status    = active/idle
          TRIM      = supported
          Scheduler = deadline

        SMART info:
            9 Power_On_Hours            =     1878 [h]
          194 Temperature_Celsius       =       27 (Min/Max 14/50)  [°C]


+++ SATA Aggressive Link Power Management
/sys/class/scsi_host/host0/link_power_management_policy  = min_power
/sys/class/scsi_host/host1/link_power_management_policy  = min_power
/sys/class/scsi_host/host2/link_power_management_policy  = min_power
/sys/class/scsi_host/host3/link_power_management_policy  = min_power

+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)

+++ Intel Graphics
/sys/module/i915/parameters/powersave        = (not available)
/sys/module/i915/parameters/enable_rc6       =  1 (enabled)
/sys/module/i915/parameters/enable_fbc       = -1 (use per-chip default)
/sys/module/i915/parameters/lvds_downclock   =  0 (disabled)
/sys/module/i915/parameters/semaphores       = -1 (use per-chip default)

+++ Wireless
bluetooth = on
wifi      = on
wwan      = none (no device)

hci0(btusb)         : not connected
wlp7s0(ath10k_pci)  : connected, power management = off

+++ Audio
/sys/module/snd_hda_intel/parameters/power_save            = 1
/sys/module/snd_hda_intel/parameters/power_save_controller = Y

+++ Runtime Power Management
device classes   = all
device blacklist = (not configured)
driver blacklist = radeon nouveau

/sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:01.0/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:02.0/power/control = auto (0x030000, VGA compatible controller, i915)
/sys/bus/pci/devices/0000:00:14.0/power/control = auto (0x0c0330, USB controller, xhci_hcd)
/sys/bus/pci/devices/0000:00:14.2/power/control = auto (0x118000, Signal processing controller, no driver)
/sys/bus/pci/devices/0000:00:15.0/power/control = auto (0x118000, Signal processing controller, intel-lpss)
/sys/bus/pci/devices/0000:00:15.1/power/control = auto (0x118000, Signal processing controller, intel-lpss)
/sys/bus/pci/devices/0000:00:16.0/power/control = auto (0x078000, Communication controller, mei_me)
/sys/bus/pci/devices/0000:00:17.0/power/control = auto (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:00:1c.0/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.3/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1f.0/power/control = auto (0x060100, ISA bridge, no driver)
/sys/bus/pci/devices/0000:00:1f.2/power/control = auto (0x058000, Memory controller, no driver)
/sys/bus/pci/devices/0000:00:1f.3/power/control = auto (0x040100, Multimedia audio controller, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1f.4/power/control = auto (0x0c0500, SMBus, no driver)
/sys/bus/pci/devices/0000:01:00.0/power/control = auto (0x030200, 3D controller, nvidia)
/sys/bus/pci/devices/0000:07:00.0/power/control = auto (0x028000, Network controller, ath10k_pci)
/sys/bus/pci/devices/0000:08:00.0/power/control = auto (0x020000, Ethernet controller, r8169)

+++ USB
autosuspend        = enabled
device whitelist   = (not configured)
device blacklist   = (not configured)
wwan blacklist     = enabled

Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 3.0 root hub (hub)
Bus 001 Device 004 ID 04f2:b526 control = auto, autosuspend_delay_ms =  2000 -- Chicony Electronics Co., Ltd  (uvcvideo)
Bus 001 Device 003 ID 04ca:3016 control = auto, autosuspend_delay_ms =  2000 -- Lite-On Technology Corp.  (btusb)
Bus 001 Device 002 ID 045e:07b2 control = on,   autosuspend_delay_ms =  2000 -- Microsoft Corp.  (usbhid)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 2.0 root hub (hub)

+++ Battery Status
/sys/class/power_supply/BAT0/manufacturer                   = LGC
/sys/class/power_supply/BAT0/model_name                     = AC14A8L
/sys/class/power_supply/BAT0/cycle_count                    = (not supported)
/sys/class/power_supply/BAT0/charge_full_design             =   4605 [mAh]
/sys/class/power_supply/BAT0/charge_full                    =   4686 [mAh]
/sys/class/power_supply/BAT0/charge_now                     =   4613 [mAh]
/sys/class/power_supply/BAT0/current_now                    =   2015 [mA]
/sys/class/power_supply/BAT0/status                         = Discharging

linrunner · 29 Mai 2016

Ich stelle fest, dass Du immer noch genauso vollständig beratungsresistent bist, wie früher. Viel Spass noch ...

vickoxy · 29 Mai 2016

linrunner schrieb:
Ich stelle fest, dass Du immer noch genauso vollständig beratungsresistent bist, wie früher. Viel Spass noch ...

Entschuldige, habe gedacht, ich brauche tlp-stat im Akku Modus? Das habe ich auch dann ausgelesen. Hier mit Stromzufuhr...

Code:

linux@linux:~$ sudo tlp-stat
[sudo] Passwort für linux: 
--- TLP 0.8 --------------------------------------------

+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
TLP_DEFAULT_MODE=AC
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=powersave
DISK_DEVICES="sda sdb"
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
WOL_DISABLE=Y
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
RUNTIME_PM_ALL=1
RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau nvidia"
USB_AUTOSUSPEND=1
USB_BLACKLIST="045e:07b2"
USB_BLACKLIST_WWAN=1
RESTORE_DEVICE_STATE_ON_STARTUP=0
DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth"

+++ System Info
System         = Acer V1.01 Aspire VN7-792G
BIOS           = V1.01
Release        = Ubuntu 16.04 LTS
Kernel         = 4.4.0-22-generic #40-Ubuntu SMP Thu May 12 22:03:46 UTC 2016 x86_64
/proc/cmdline  = BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed root=UUID=f210828b-2a9b-4785-8dce-24cb2dda647e ro quiet splash vt.handoff=7
Init system    = systemd

+++ System Status
TLP power save = enabled
power source   = AC

+++ Processor
CPU Model      = Intel(R) Core(TM) i5-6300HQ CPU @ 2.30GHz

/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq  =  3200000 [kHz]

/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq  =  3200000 [kHz]

/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq  =  3200000 [kHz]

/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq  =  3200000 [kHz]

/sys/devices/system/cpu/intel_pstate/min_perf_pct      = 25
/sys/devices/system/cpu/intel_pstate/max_perf_pct      = 100
/sys/devices/system/cpu/intel_pstate/no_turbo          = 0

x86_energy_perf_policy.cpu0                            = normal
x86_energy_perf_policy.cpu1                            = normal
x86_energy_perf_policy.cpu2                            = normal
x86_energy_perf_policy.cpu3                            = normal

/proc/sys/kernel/nmi_watchdog                          = 0

+++ Undervolting
PHC kernel not available.

+++ Temperatures
CPU temp               =    70 [°C]
Fan speed              = (not available)

+++ File System
/proc/sys/vm/laptop_mode               =     0
/proc/sys/vm/dirty_writeback_centisecs =  1500
/proc/sys/vm/dirty_expire_centisecs    =  1500
/proc/sys/vm/dirty_ratio               =    20
/proc/sys/vm/dirty_background_ratio    =    10
/proc/sys/fs/xfs/age_buffer_centisecs  = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs    = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs     = (not available)

+++ Storage Devices
/dev/sda:
          Model     = Crucial_CT256MX100SSD1                  
          Firmware  = MU01    
          APM Level = 254
          Status    = active/idle
          TRIM      = supported
          Scheduler = deadline

        SMART info:
            9 Power_On_Hours            =     2430 [h]
          194 Temperature_Celsius       =       43 (Min/Max 14/53)  [°C]


+++ SATA Aggressive Link Power Management
/sys/class/scsi_host/host0/link_power_management_policy  = max_performance
/sys/class/scsi_host/host1/link_power_management_policy  = max_performance
/sys/class/scsi_host/host2/link_power_management_policy  = max_performance
/sys/class/scsi_host/host3/link_power_management_policy  = max_performance

+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)

+++ Wireless
bluetooth = off (software)
wifi      = on
wwan      = none (no device)

hci0(btusb)         : not connected
wlp7s0(ath10k_pci)  : connected, power management = off

+++ Audio
/sys/module/snd_hda_intel/parameters/power_save            = 0
/sys/module/snd_hda_intel/parameters/power_save_controller = N

+++ Runtime Power Management
device classes   = all
device blacklist = (not configured)
driver blacklist = radeon nouveau nvidia

/sys/bus/pci/devices/0000:00:00.0/power/control = on   (0x060000, Host bridge, no driver)
/sys/bus/pci/devices/0000:00:01.0/power/control = on   (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:02.0/power/control = on   (0x030000, VGA compatible controller, i915_bpo)
/sys/bus/pci/devices/0000:00:14.0/power/control = on   (0x0c0330, USB controller, xhci_hcd)
/sys/bus/pci/devices/0000:00:14.2/power/control = on   (0x118000, Signal processing controller, no driver)
/sys/bus/pci/devices/0000:00:15.0/power/control = on   (0x118000, Signal processing controller, intel-lpss)
/sys/bus/pci/devices/0000:00:15.1/power/control = on   (0x118000, Signal processing controller, intel-lpss)
/sys/bus/pci/devices/0000:00:16.0/power/control = on   (0x078000, Communication controller, mei_me)
/sys/bus/pci/devices/0000:00:17.0/power/control = on   (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:00:1c.0/power/control = on   (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.3/power/control = on   (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1f.0/power/control = on   (0x060100, ISA bridge, no driver)
/sys/bus/pci/devices/0000:00:1f.2/power/control = on   (0x058000, Memory controller, no driver)
/sys/bus/pci/devices/0000:00:1f.3/power/control = on   (0x040100, Multimedia audio controller, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1f.4/power/control = on   (0x0c0500, SMBus, no driver)
/sys/bus/pci/devices/0000:01:00.0/power/control = on   (0x030200, 3D controller, no driver)
/sys/bus/pci/devices/0000:07:00.0/power/control = on   (0x028000, Network controller, ath10k_pci)
/sys/bus/pci/devices/0000:08:00.0/power/control = on   (0x020000, Ethernet controller, r8169)

+++ USB
autosuspend        = enabled
device whitelist   = (not configured)
device blacklist   = 045e:07b2
wwan blacklist     = enabled

Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 3.0 root hub (hub)
Bus 001 Device 004 ID 04f2:b526 control = auto, autosuspend_delay_ms =  2000 -- Chicony Electronics Co., Ltd  (uvcvideo)
Bus 001 Device 003 ID 04ca:3016 control = auto, autosuspend_delay_ms =  2000 -- Lite-On Technology Corp.  (btusb)
Bus 001 Device 002 ID 0461:4e57 control = on,   autosuspend_delay_ms =  2000 -- Primax Electronics, Ltd  (usbhid)
Bus 001 Device 005 ID 0bda:0129 control = auto, autosuspend_delay_ms =  2000 -- Realtek Semiconductor Corp. RTS5129 Card Reader Controller (rtsx_usb)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 2.0 root hub (hub)

+++ Battery Status
/sys/class/power_supply/BAT0/manufacturer                   = LGC
/sys/class/power_supply/BAT0/model_name                     = AC14A8L
/sys/class/power_supply/BAT0/cycle_count                    = (not supported)
/sys/class/power_supply/BAT0/charge_full_design             =   4605 [mAh]
/sys/class/power_supply/BAT0/charge_full                    =   4298 [mAh]
/sys/class/power_supply/BAT0/charge_now                     =   3590 [mAh]
/sys/class/power_supply/BAT0/current_now                    =   1998 [mA]
/sys/class/power_supply/BAT0/status                         = Charging

linux@linux:~$

Oder verstehe ich was falsch?

Und nun gibt query Folgendes:

Code:

linux@linux:~$ sudo prime-select query
intel

- - - Beitrag zusammengeführt - - -

UPDATE 1:
Ich habe eine Nuinstallation/Cleaninstall von 16.04 gemacht. Nun ist alles so, wie es sein soll....

Hoher Stromverbrauch mit Nvidia Optimus

vickoxy

Active member

linrunner

Ubuntuversteher

vickoxy

Active member

Werbung