Ab Bios 1.06 weniger Akkulaufzeit aber kein Fiepen

SpecialTrooper

New member
Themenstarter
Registriert
17 Apr. 2007
Beiträge
33
Schönen guten Abend,

ich habe meinem X60 das neuste Bios (2.16) verpasst. Das Problem ist nur, dass nun das X60 deutlich mehr Strom im Akkubetrieb verbraucht ca. 3 Watt mehr. Gemessen mit NHC. Außerdem wird es ca 4 Grad wärmer.

Kann das jemand bestätigen? Würde gerne mein altes Bios wieder drauf spielen. Weiß leider noch nichtmal meine vorherige Verion und hab auch keine Ahnung wie das gehen soll.

Würde mich echt über Unterstützung freuen. Bin ein wenig genervt :-)
 
So das zurückflashen klappt ja ganz gut.

Ist euch eigentlich bewusst, dass ab Bios Version 1.06, die das Fiepen der X60 verhindert die Akkulaufzeit ne gute Stunde geringer ist beim 8 Zellen Akku?

Bei NHC geht der Wattverbrauch ab diesem Bios nicht mehr unter 10 ohne Anwendung bei sonst gleichen Einstellungen. Bei den Biosversionen davor geht er beim Nichtstun sogar auf 8.

Krass IBM hat also das Fiepen mit weniger Akkulaufzeit wegbekommen :-)
 
was für ein X60 hast Du denn? ein 1.8 oder 2GHz? CoreDuo oder Core2Duo?
 
Vielleicht können mir einfach mal ein paar Leute mit nem X60 oder auch X60s ihren Wattverbrauch posten. Mit NHC gemessen.

Einfach das Display ganz runter, Energiemanager alle Spareinstellungen aktivieren, Nichts machen für ein paar Sekunden und dann mal auf den Verbrauch schauen.

Wäre super von euch :-)

EDIT: Ach ja vielleicht können mir die Leute mit einem X60s ja dazu noch die Umdrehungsgeschwindigkeit ihres Lüfter auf der 1. Stufe sagen. Mein X60 läuft dann schon mit knapp 2800rpm. Was sich auch akustisch bemerkbar macht und definitiv lauter als die Festplatte ist.
 
mmh das aktuelle bios hat die version 2.11 wo hast du denn das 2.16 her?





Symptoms
Version 7BETD0WW (2.11)

* (Fix) The system can fail to boot from an optical drive. (BIOS)

Version 7BETC9WW (2.10)
[Important Updates]

* This BIOS contains a critical processor microcode update to improve system reliability. Lenovo highly recommends that you apply this BIOS update.
* (Fix) Upgraded to the latest microcode update for Intel Core 2 Duo processor.
* (Fix) The CPU clock may down during charging the battery. (EC)

Version 7BETC8WW (2.09)

* On a system with Windows Vista, the system may display the following error message during each power on, then cannot boot from the hard drive.
2100: Initialization error on HDD(Main hard disk drive)
* (Fix) On a system with Windows Vista, the display resolution changes to VGA mode(640x480) after the LCD cover is closed and opened.

Version 7BETC6WW (2.07)

* (Fix) "SATA Controller Mode Option" is changed to "Compatibility" when the system boots up without the primary Hard Drive. "SATA Controller Mode Option" is displayed in the BIOS Setup Utility. "Config"->"Serial ATA(SATA)"->"SATA Controller Mode Option" (BIOS)
* (Fix) The SMBIOS structure which represents Modem jack(RJ-11) is not displayed. (BIOS)

Version 7BETC5WW (2.06)

* (New) Support of Microsoft Windows Vista. (BIOS)
* (New) Support of Intel(R) Virtulization Technology. A new Intel(R) Virtulization Technology option is added to CPU of the Config menu in BIOS Setup Utility. Config->CPU->Intel(R) Virtulization Technology. The Intel(R) Virtulization Technology option is always set to
"disabled" after the BIOS was updated or flashed. The option needs to be set to "enabled" if necessary after BIOS update/flash. (BIOS)
* (Fix) POST error 1804 may appear at system power on with some types of USB devices. (BIOS)
* (Fix) When EMM386.EXE is used at system boot from PC-DOS on a USB memory key, the system may hang or the wrong data may be accessed on the hard drive while reading or writing. (BIOS)

Version 7BETC4WW (2.05)

* (New) Maximum Graphics Memory size increases to 224MB. (BIOS)
* (Fix) If the computer is forcibly shut down by special conditions (such like the power button being pressed for seconds or the battery down in suspend mode), the computer may not work after power on. (BIOS)
* (Fix) The computer may be shutdown by a certain 3G GPRS card in the PC card slot. (EC)
* (Fix) Once Active Protection System is disabled, it cannot be enabled again until the system is restarted. (EC)

Version 7BETC3WW (2.04)

* (Fix) Needs to enter a BIOS supervisor password after BIOS update to 7BETB9WW/2.00f or later version from 7BET50WW/1.08(or older version), if the BIOS supervisor password is set at BIOS update. Note that this problem does not occur, once the system booted with BIOS 7BETB9WW or later version. If your X60 runs without problems after installing 7BETC2WW/2.03, no need to update to 7B9ETC3WW/2.04.

Version 7BETC2WW (2.03)

* (Fix) Windows desktop Icon location may be changed after Lid open/close. (BIOS) Note: To resolve this problem, after updating the BIOS with this package, the following display driver must be installed, again. Video driver Intel 900/950/910GML/915GM/940GML/945GM Version 6.14.10.4693 or higher

Version 7BETC1WW (2.02)

* (New) Support for new chipset/processor by SMBIOS
* (Fix) Wrong data may be written to hard drive, when EMM386.EXE of IBM PC-DOS is used. (BIOS)

Version 7BETB9WW (2.00f)

* (New) Support for ThinkPad X60/X60s 2006 autumn model

Version 7BET50WW (1.10)

* (New) Upgraded to the latest microcode for Intel Core processor.
* (Fix) Timeout may take more than 30 seconds if PXE (Preboot eXecution Environment) network boot fails. (BIOS)
* (Fix) POST1820 error occurs on the following system condition.
o Wireless WAN model
o WWAN is disabled by BIOS Setup or Wireless hardware switch.
o An external USB Fingerprint reader is connected to the USB port on the left side of the system or any USB port in the docking station. (BIOS)
* (Fix) When a system with a USB floppy drive in Ultrabase is hot-docked, the USB floppy drive is intermittently not recognized. (BIOS)
* (Fix) The battery may not continue to be charged after the system was resumed from Suspend or Hibernation mode even if the battery was charged before entering the power saving mode. (EC)

Version 7BET49WW (1.09)

* (New) Support of external 1920x1200 resolution wide display. (BIOS)
* (Fix) Docking system in the Dock/Mini Dock sometimes does not appear to be complete.(BIOS)
* (Fix) When the Password reset service of BIOS Setup is enabled (BIOS Setup->Security->Password->Password reset service) and Passphrase is disabled (BIOS Setup->Security->Password->Using Passphrase), POP(Power On Password) or HDP(Hard Disk Password) may not be unlocked with a registered password by the Password reset service. (BIOS)
* (Fix) Even if CD-ROM speed is set to "Silent mode" in BIOS Setup, the "Silent mode" may be changed to "Normal mode".(BIOS)
* (Fix) The process to recognize the kind of adapter connecting the system just after the OS boot was improved. (EC)
* (Fix) A POST error message at no bootable device was changed.(BIOS)
* (Fix) Display switching to external Display or Projector via Presentation Director is sometimes failed . (BIOS)
* (Fix) HDD reset may not be issued to secondary HDD of Ultrabase when communication reset is required. (BIOS)
* (Fix) Entering standby may fail in a certain case. USB host controller setting is changed to fix. (BIOS)
* (Fix) The EC intermittenly hangs. (ThinkLight does not light.) (EC)

Version 7BET46WW (1.06)

* (Fix) Acoustic noise may be heard when a USB1.1 device is connected to the system in battery mode. (BIOS)
* (Fix) The suspend beep volume does not coincide with a sound volume set by user. (BIOS)
* (Fix) 1400 x 1050 pixels can be selected as a screen resolution by Display property or an application software. (BIOS)

Version 7BET45WW (1.05)

* (New) POST 2100 error is subdivided to show individual error messages for the hard drive.(BIOS)
* (Fix) Performance degradation occurs on infrared devices at 4Mbps transfer date. (BIOS)
* (Fix) Data Execution Prevention is not correctly disabled in the BIOS Setup utility. (BIOS)

Version 7BET44WW (1.04)

* (New) Improvement for the process of the power-on control. (EC)
* (Fix) If the hard disk with a password is attached to the docking station during standby mode, the hard disk may not be recognized. (BIOS)
* (Fix) The system may hang very intermittently by reboot under DOS mode. (BIOS)

Version 7BET43WW (1.03)

* (New) Support for ThinkPad X60 and X60s
 
Ja danke du hast recht, es die 2.11 Bios Version. Keine Ahnung wie ich auf 2.16 gekommen bin.

Danke für deine Werte. Ein Bitte hätte ich noch. Kannst du mir mir die Geschwindigkeit deines Lüfters sagen?

Hab nämlich gerade im USA TP-Forum gelesen, dass der Lüfter des X60s deutlich leiser laufen soll, als der des X60. Möchte gerne herausfinden, ob das an der Umdrehungsgeschwindigkeit oder an einem anderen Lüfter liegt.
 
ca 3000 Touren bei ca 50°, gemessen mit PFControl im BIOS Mode.

Das Lüftergeräusch vom X60 kenne ich nicht, aber das vom X60s ist angenehm leise bzw. kaum wahrnehmbar.
 
Ja beim X60 finds ich den Lüfter echt recht laut...wohlgemerkt auf 1. Stufe.

Hatte schon überlegt das Bios vom X60s drauf zu machen, aber wenn die Geschwindigkeit gleich ist, muss es wohl an was anderem liegen.
 
x60 und x60s haben das gleiche Bios!!! Die Lüfter sind aber unterschiedlich...
 
Original von Boxster
x60 und x60s haben das gleiche Bios!!! Die Lüfter sind aber unterschiedlich...

Hey danke, dann weiß ich ja endlich Bescheid.

Das ist natürlich blöd, dann kann man beim X60 wohl nix machen, was nicht den Verlust der Garantie mit sich bringt.

Oder gibts ne Möglichkeit den Lüfter fürs X60s zu bekommen ohne Garantie verlust?
 
der Lüfter von X60 und X60s sind nicht miteinander kompatibel. Also nein
 
Naja was solls. Dann geb ich mich mal damit zufrieden.

Hab jetzt einfach den Lüfter aus. CPU auf 1 GHZ und 0,95 Volt und er wird nie heißer als 62 Grad.

Ich denke, dass muss das X60 jetzt für den Rest seiner Tage aushalten. Mal gucken wie lange es das mitmacht...IBM steht ja für Lanlebigkeit :D

Nächste Mal wird ein X6xs gekauft.
 
  • ok1.de
  • thinkstore24.de
  • ok2.de - Notebook Computer Server
  • Preiswerte-IT - Gebrauchte Lenovo Notebooks kaufen

Werbung

Zurück
Oben