Follow along with the video below to see how to install our site as a web app on your home screen.
Anmerkung: This feature may not be available in some browsers.
Schade. Ich muss zugeben, dass ich mich bis jetzt kaum mit dem Fan Control Algorithmus von tpfand auseinandergesetzt habe, da der Code schließlich gar nicht von mir stammt.
sudo /etc/init.d/tpfand start[/ CODE] passiert auch nichts...
Wenn ich [CODE]echo level 1 | sudo tee /proc/acpi/ibm/fan
sudo /etc/init.d/tpfand stop
sudo /usr/sbin/tpfand --debug
Hi Myon
Ich habe die "Beta" eben installiert (T410s).
Der Lüfter verhält sich allerdings genauso wie mit der letzten Version.
Auf 15% läuft er zwischen 1850 und 2050 rpm (genau wie letztes Mal).
Mit Thinkfan läuft er, wie schonmal erwähnt, recht konstant mit ca. 1950 rpm.
Ich bin jetzt nicht der Linuxversteher aber da du den Debug-Modus angesprochen hast und ich mit dem T410s ein "Problemkind" habe: kann ich noch irgendwelche Informationen liefern die helfen der Ursache des Pulsierens auf den Grund zu gehen?
Vielen Dank für das wunderbare Tool! Hab das Pech gehabt, einen X60T mit ratterndem Lüfter erwischt zu haben und konnte ihn dank tpfan ruhig stellen. :thumbsup: Habe vor lauter Begeisterung gleich mal bei Launchpad eine Übersetzung ins Russische reingestellt. Noch ein paar Fragen und Anmerkungen:
1. Wo wir gerade bei der Übersetzung sind: Die Version in Archs AUR ist auf Englisch, obwohl laut Launchpad die deutsche Übersetzung komplett ist.
2. Ich habe irgendwo etwas von einem Tray-Icon für tpfan aufgeschnappt, aber hier unter Arch gibt es keins, ist das Tray-Icon vielleicht Windows-only?
3. Ich würde gern mein Profil fürs X60T reinschicken, bin aber nicht so fit in Sachen Lüftersteuerung, daher vorsichtshalber die Nachfrage: Ist es ok für das System, wenn es bei ca. 65°C gehalten wird?
4. Ein Feature-Request: Eine Möglichkeit zur Verwaltung mehrerer Profile auf dem gleichen Gerät wäre genial. Anwendungsfall: Mein derzeitiges Profil erlaubt es dem Thinkpad recht warm zu werden, dafür ist der Lüfter die meiste Zeit aus. Das ist gut, wenn der Laptop auf dem Tisch in der Uni-Bibliothek steht, aber schlecht, wenn ich ihn in der Hand halte und mich nicht verbrennen will. Oder ein weniger Tablet-spezifischer Anwendungsfall: Wenn der Laptop vom Akku läuft und die CPU auf powersave steht, wird er nicht so warm, wie wenn er am Strom hängt und die CPU auf Performance steht - damit ist auch das erwünschte Verhalten der Lüftersteuerung unterschiedlich.
In beiden Fällen wäre es sehr bequem zwischen mehreren Profilen wählen zu können. Dann noch eine Profilauswahl übers Kontextmenü eines Tray-Icons und die Perfektion ist erreicht.
MfG Photon
# 1) IBM/Lenovo Thinkpads (thinkpad_acpi, /proc/acpi/ibm)
# =======================================================
# All you need to do is set the temperature limits or stick with these
# defaults. So this config should work unmodified on any Thinkpad.
#
# It's also possible to specify sysfs temperature inputs, but you can't use
# /proc/acpi/ibm/thermal along with them.
# You could also explicitly specify "fan /proc/acpi/ibm/fan", but it's the
# default anyway.
#
# Syntax:
# (LEVEL, LOW, HIGH)
# LEVEL is the fan level to use (0-7 with thinkpad_acpi)
# LOW is the temperature at which to step down to the previous level
# HIGH is the temperature at which to step up to the next level
# All numbers are integers.
#
(0, 0, 38)
(1, 34, 55)
(2, 45, 58)
(3, 52, 60)
(4, 54, 62)
(5, 57, 64)
(7, 60, 32767)
01:53:58: Polling the sensors
Current fan level: 2
Applying fan pulsing fix
Current sensor values:
Sensor 0: 46
Setting fan level to 2
01:54:02: Polling the sensors
Current fan level: 2
Applying fan pulsing fix
Current sensor values:
Sensor 0: 46
Setting fan level to 2
01:56:23: Polling the sensors
Current fan level: 2
Applying fan pulsing fix
Current sensor values:
Sensor 0: 55
Setting fan level to 255
01:56:27: Polling the sensors
Current fan level: 255
Current sensor values:
Sensor 0: 55
Setting fan level to 255
01:56:30: Polling the sensors
Current fan level: 255
Current sensor values:
Sensor 0: 52
Setting fan level to 2
01:56:34: Polling the sensors
Current fan level: 2
Applying fan pulsing fix
Current sensor values:
Sensor 0: 50
Setting fan level to 2