Linux X270 schaltet sich immer mal wieder ab beim Zuklappen

Linux Betriebssystem
Volvo-Berti

Volvo-Berti

Well-known member
Themenstarter
Registriert
10 März 2006
Beiträge
2.746
Tach zusammen,

wie es in der Überschrift steht, schaltet sich mein X270 einfach mal komplett ab (komplett heruntergefahren), wenn ich es zuklappe. Da es mit Linux läuft und tlp drauf ist, kann ich nur raten, was die Ursache sein kann.

any ideas?

im Anhang mal 2 screenshots der aktuellen Einstellungen und der Akkus.

und die Ausgabe von tlp-stat:
Code: 
 TLP 1.8.0 --------------------------------------------

+++ Configured Settings:
defaults.conf L0006: TLP_ENABLE="1"
defaults.conf L0007: TLP_WARN_LEVEL="3"
defaults.conf L0008: TLP_MSG_COLORS="91 93 1 92"
defaults.conf L0009: TLP_PERSISTENT_DEFAULT="0"
defaults.conf L0010: DISK_IDLE_SECS_ON_AC="0"
defaults.conf L0011: DISK_IDLE_SECS_ON_BAT="2"
defaults.conf L0012: MAX_LOST_WORK_SECS_ON_AC="15"
defaults.conf L0013: MAX_LOST_WORK_SECS_ON_BAT="60"
defaults.conf L0014: CPU_ENERGY_PERF_POLICY_ON_AC="balance_performance"
defaults.conf L0015: CPU_ENERGY_PERF_POLICY_ON_BAT="balance_power"
defaults.conf L0016: NMI_WATCHDOG="0"
defaults.conf L0017: DISK_DEVICES="nvme0n1 sda"
defaults.conf L0018: DISK_APM_LEVEL_ON_AC="254 254"
defaults.conf L0019: DISK_APM_LEVEL_ON_BAT="128 128"
defaults.conf L0020: DISK_APM_CLASS_DENYLIST="usb ieee1394"
defaults.conf L0021: DISK_IOSCHED="keep keep"
defaults.conf L0022: SATA_LINKPWR_ON_AC="med_power_with_dipm"
defaults.conf L0023: SATA_LINKPWR_ON_BAT="med_power_with_dipm"
defaults.conf L0024: AHCI_RUNTIME_PM_ON_AC="on"
defaults.conf L0025: AHCI_RUNTIME_PM_ON_BAT="auto"
defaults.conf L0026: AHCI_RUNTIME_PM_TIMEOUT="15"
defaults.conf L0027: PCIE_ASPM_ON_AC="default"
defaults.conf L0028: PCIE_ASPM_ON_BAT="default"
defaults.conf L0029: RADEON_DPM_PERF_LEVEL_ON_AC="auto"
defaults.conf L0030: RADEON_DPM_PERF_LEVEL_ON_BAT="auto"
defaults.conf L0031: RADEON_POWER_PROFILE_ON_AC="default" #! Parameter is deprecated: feature will be removed with the next release
defaults.conf L0032: RADEON_POWER_PROFILE_ON_BAT="default" #! Parameter is deprecated: feature will be removed with the next release
defaults.conf L0033: AMDGPU_ABM_LEVEL_ON_AC="0"
defaults.conf L0034: AMDGPU_ABM_LEVEL_ON_BAT="1"
defaults.conf L0035: WIFI_PWR_ON_AC="off"
defaults.conf L0036: WIFI_PWR_ON_BAT="on"
defaults.conf L0037: WOL_DISABLE="Y"
defaults.conf L0038: SOUND_POWER_SAVE_ON_AC="1"
defaults.conf L0039: SOUND_POWER_SAVE_ON_BAT="1"
defaults.conf L0040: SOUND_POWER_SAVE_CONTROLLER="Y"
defaults.conf L0041: BAY_POWEROFF_ON_AC="0"
defaults.conf L0042: BAY_POWEROFF_ON_BAT="0"
defaults.conf L0043: BAY_DEVICE="sr0"
defaults.conf L0044: RUNTIME_PM_ON_AC="on"
defaults.conf L0045: RUNTIME_PM_ON_BAT="auto"
defaults.conf L0046: RUNTIME_PM_DRIVER_DENYLIST="mei_me nouveau radeon xhci_hcd"
defaults.conf L0047: USB_AUTOSUSPEND="1"
defaults.conf L0048: USB_EXCLUDE_AUDIO="1"
defaults.conf L0049: USB_EXCLUDE_BTUSB="0"
defaults.conf L0050: USB_EXCLUDE_PHONE="0"
defaults.conf L0051: USB_EXCLUDE_PRINTER="1"
defaults.conf L0052: USB_EXCLUDE_WWAN="0"
defaults.conf L0053: RESTORE_DEVICE_STATE_ON_STARTUP="0"
defaults.conf L0054: RESTORE_THRESHOLDS_ON_BAT="0"
defaults.conf L0055: NATACPI_ENABLE="1"
defaults.conf L0056: TPSMAPI_ENABLE="1"
/etc/tlp.conf L0530: START_CHARGE_THRESH_BAT0="50"
/etc/tlp.conf L0532: STOP_CHARGE_THRESH_BAT0="80"
/etc/tlp.conf L0538: START_CHARGE_THRESH_BAT1="50"
/etc/tlp.conf L0540: STOP_CHARGE_THRESH_BAT1="80"

+++ System Info
System         = LENOVO ThinkPad X270 W10DG 20K5S25R00
BIOS           = R0IET73W (1.51 )
EC Firmware    = 1.18
OS Release     = Linux Mint 22.2
Kernel         = 6.8.0-85-generic #85-Ubuntu SMP PREEMPT_DYNAMIC Thu Sep 18 15:26:59 UTC 2025 x86_64
/proc/cmdline  = BOOT_IMAGE=/boot/vmlinuz-6.8.0-85-generic root=UUID=089f6d3b-f269-4fa4-bc98-d16f56a992ca ro quiet splash
Init system    = systemd v255 (255.4-1ubuntu8.11)
Boot mode      = UEFI
Suspend mode   = s2idle [deep]

+++ TLP Status
State          = enabled
RDW state      = enabled
Last run       = 09:50:27, 5473 sec(s) ago
Mode           = battery
Power source   = battery

+++ Processor
CPU model = Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz

/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = performance powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq  =   400000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq  =  2800000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq  =   400000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq  =  2800000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference = balance_power [EPP]
/sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power

/sys/devices/system/cpu/cpu1..cpu3: omitted for clarity, use -v to show all

/sys/devices/system/cpu/intel_pstate/status            = active
/sys/devices/system/cpu/intel_pstate/min_perf_pct      =  14 [%]
/sys/devices/system/cpu/intel_pstate/max_perf_pct      = 100 [%]
/sys/devices/system/cpu/intel_pstate/no_turbo          =   0
/sys/devices/system/cpu/intel_pstate/hwp_dynamic_boost =   0
/sys/devices/system/cpu/intel_pstate/turbo_pct         =  21 [%]
/sys/devices/system/cpu/intel_pstate/num_pstates       =  25
/sys/module/workqueue/parameters/power_efficient       = Y
/proc/sys/kernel/nmi_watchdog                          = 0

+++ Platform Profile
/sys/firmware/acpi/platform_profile                    = (not available)
/sys/firmware/acpi/platform_profile_choices            = (not available)
/sys/devices/platform/thinkpad_acpi/dytc_lapmode       = (not available)

+++ Temperatures
/proc/acpi/ibm/thermal = 39 -128 0 0 0 0 0 0 [°C]
/proc/acpi/ibm/fan     =     0 [/min]

+++ File System
/proc/sys/vm/laptop_mode               =     2
/proc/sys/vm/dirty_writeback_centisecs =  6000
/proc/sys/vm/dirty_expire_centisecs    =  6000
/proc/sys/vm/dirty_ratio               =    20
/proc/sys/vm/dirty_background_ratio    =    10

+++ Disks
Devices = nvme0n1 sda

/dev/nvme0n1: not present.

/dev/sda:
  Type       = SATA
  Disk ID    = ata-SAMSUNG_MZ7LN256HAJQ-000L7_**************
  Model      = SAMSUNG MZ7LN256HAJQ-000L7            
  Firmware   = MVT05L6Q
  APM Level  = none/disabled
  Status     = active/idle
  TRIM       = supported
  Host       = host1
  Scheduler  = none [mq-deadline] (multi queue)

  Runtime PM:
    /sys/block/sda/device/power/control = auto, autosuspend_delay_ms = 15000

  SMART info:
      5 Reallocated_Sector_Ct     =        0
      9 Power_On_Hours            =     7426 [h]
     12 Power_Cycle_Count         =     1448
    173 Wear_Leveling_Count       =       95 [%]
    178 Used_Rsvd_Blk_Cnt_Chip    =        0
    180 Unused_Rsvd_Blk_Cnt_Tot   =      630
    194 Temperature_Celsius       =       32 (Min/Max 15/45)  [°C]
    233 Media_Wearout_Indicator   =       95 [%]
    241 Total_LBAs_Written        =    0,000 [TB]
    249 NAND_Writes_1GiB          =    12896 [GB]

+++ AHCI Link Power Management (ALPM) :: SATA Links
/sys/bus/pci/devices/0000:00:17.0/ata1/host0/scsi_host/host0/link_power_management_policy = med_power_with_dipm
/sys/bus/pci/devices/0000:00:17.0/ata2/host1/scsi_host/host1/link_power_management_policy = med_power_with_dipm  -- sda

+++ AHCI Port Runtime Power Management :: SATA/ATA Ports
/sys/bus/pci/devices/0000:00:17.0/ata1/power/control     = auto
/sys/bus/pci/devices/0000:00:17.0/ata2/power/control     = auto  -- sda

+++ Docks and Device Bays
/sys/devices/platform/dock.0: battery_bay   = battery present

+++ Intel Graphics
/sys/class/drm/card1/device/driver           = i915

/sys/class/drm/card1/power/rc6_enable        =  1 (enabled)
/sys/kernel/debug/dri/1/i915_fbc_status      = FBC enabled
/sys/kernel/debug/dri/1/i915_edp_psr_status  = PSR mode: PSR1 enabled

/sys/class/drm/card1/gt_min_freq_mhz         =   300 [MHz]
/sys/class/drm/card1/gt_max_freq_mhz         =  1000 [MHz]
/sys/class/drm/card1/gt_boost_freq_mhz       =  1000 [MHz]
/sys/class/drm/card1/gt_RPn_freq_mhz         =   300 [MHz] (GPU min)
/sys/class/drm/card1/gt_RP0_freq_mhz         =  1000 [MHz] (GPU max)

+++ Wireless
bluetooth = on
nfc       = none (no device)
wifi      = on
wwan      = none (no device)

hci0(btusb)                   : bluetooth, not connected
wlp3s0(iwlwifi)               : wifi, connected, power management = on

+++ Audio
/sys/module/snd_hda_intel/parameters/power_save            = 1
/sys/module/snd_hda_intel/parameters/power_save_controller = Y

+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = [default] performance powersave powersupersave (using BIOS preferences)

+++ PCIe Runtime Power Management
Enable devices    = (disabled)
Disable devices   = (disabled)
Device denylist   = (disabled)
Driver denylist   = mei_me nouveau radeon xhci_hcd

/sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, skl_uncore)
/sys/bus/pci/devices/0000:00:02.0/power/control = auto (0x030000, VGA compatible controller, i915)
/sys/bus/pci/devices/0000:00:14.0/power/control = auto (0x0c0330, USB controller, xhci_hcd)
/sys/bus/pci/devices/0000:00:14.2/power/control = auto (0x118000, Signal processing controller, intel_pch_thermal)
/sys/bus/pci/devices/0000:00:15.0/power/control = auto (0x118000, Signal processing controller, intel-lpss)
/sys/bus/pci/devices/0000:00:15.1/power/control = auto (0x118000, Signal processing controller, intel-lpss)
/sys/bus/pci/devices/0000:00:16.0/power/control = auto (0x078000, Communication controller, mei_me)
/sys/bus/pci/devices/0000:00:17.0/power/control = auto (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:00:1c.0/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.2/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1f.0/power/control = auto (0x060100, ISA bridge, no driver)
/sys/bus/pci/devices/0000:00:1f.2/power/control = auto (0x058000, Memory controller, no driver)
/sys/bus/pci/devices/0000:00:1f.3/power/control = auto (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1f.4/power/control = auto (0x0c0500, SMBus, i801_smbus)
/sys/bus/pci/devices/0000:00:1f.6/power/control = auto (0x020000, Ethernet controller, e1000e)
/sys/bus/pci/devices/0000:02:00.0/power/control = auto (0xff0000, Unassigned class [ff00], rtsx_pci)
/sys/bus/pci/devices/0000:03:00.0/power/control = auto (0x028000, Network controller, iwlwifi)

+++ USB
Autosuspend       = enabled
Device allowlist  = (not configured)
Device denylist   = (not configured)
Exclude audio     = enabled
Exclude bluetooth = disabled
Exclude phones    = disabled
Exclude printers  = enabled
Exclude WWAN      = disabled

Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =    0 -- Linux Foundation 2.0 root hub (hub)
Bus 001 Device 002 ID 8087:0a2b control = auto, autosuspend_delay_ms = 2000 -- Intel Corp. Bluetooth wireless interface (btusb)
Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms =    0 -- Linux Foundation 3.0 root hub (hub)

+++ Battery Care
Plugin: thinkpad
Supported features: charge thresholds, recalibration
Driver usage:
* natacpi (thinkpad_acpi) = active (charge thresholds, recalibration)
Parameter value ranges:
* START_CHARGE_THRESH_BAT0/1:  0(off)..96(default)..99
* STOP_CHARGE_THRESH_BAT0/1:   1..100(default)

+++ ThinkPad Battery Status: BAT0 (Main / Internal)
/sys/class/power_supply/BAT0/manufacturer                   = LGC
/sys/class/power_supply/BAT0/model_name                     = 45N1113
/sys/class/power_supply/BAT0/cycle_count                    =     27
/sys/class/power_supply/BAT0/energy_full_design             =  23480 [mWh]
/sys/class/power_supply/BAT0/energy_full                    =  16700 [mWh]
/sys/class/power_supply/BAT0/energy_now                     =  12590 [mWh]
/sys/class/power_supply/BAT0/power_now                      =      0 [mW]
/sys/class/power_supply/BAT0/status                         = Not charging

/sys/class/power_supply/BAT0/charge_control_start_threshold =     50 [%]
/sys/class/power_supply/BAT0/charge_control_end_threshold   =     80 [%]
/sys/class/power_supply/BAT0/charge_behaviour               = [auto] inhibit-charge force-discharge

Charge                                                      =   75.4 [%]
Capacity                                                    =   71.1 [%]

+++ ThinkPad Battery Status: BAT1 (Removable / Ultrabay / Slice)
/sys/class/power_supply/BAT1/manufacturer                   = LGC
/sys/class/power_supply/BAT1/model_name                     = 45N1127
/sys/class/power_supply/BAT1/cycle_count                    =    163
/sys/class/power_supply/BAT1/energy_full_design             =  23480 [mWh]
/sys/class/power_supply/BAT1/energy_full                    =  23310 [mWh]
/sys/class/power_supply/BAT1/energy_now                     =  20880 [mWh]
/sys/class/power_supply/BAT1/power_now                      =   4024 [mW]
/sys/class/power_supply/BAT1/status                         = Discharging

/sys/class/power_supply/BAT1/charge_control_start_threshold =     50 [%]
/sys/class/power_supply/BAT1/charge_control_end_threshold   =     80 [%]
/sys/class/power_supply/BAT1/charge_behaviour               = [auto] inhibit-charge force-discharge

Charge                                                      =   89.6 [%]
Capacity                                                    =   99.3 [%]

+++ Charge total                                            =   83.7 [%]

+++ Recommendations
* BAT1 charge level is above the stop threshold. Use your laptop on battery power until the battery is discharged to the stop threshold.
 

Anhänge

  • Bildschirmfoto vom 2025-10-14 11-19-48.png
    Bildschirmfoto vom 2025-10-14 11-19-48.png
    30,1 KB · Aufrufe: 4
  • Bildschirmfoto vom 2025-10-14 11-19-21.png
    Bildschirmfoto vom 2025-10-14 11-19-21.png
    16,7 KB · Aufrufe: 4
Falls noch nicht der Fall, lege mal bitte ein persistentes Journal an (als root):
Code: 
mkdir /var/log/journal
Wenn das erledigt ist und du das nächste mal das Problem hast, dann lässt du dir nach dem Neustart das Journal der letzten Session anzeigen:
Code: 
journalctl -b 1
Mit etwas Glück fährt der Rechner sauber herunter und dann sehen wir vielleicht auch warum.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
  • ok1.de
  • IT Refresh - IT Teile & mehr
  • thinkstore24.de
  • Preiswerte-IT - Gebrauchte Lenovo Notebooks kaufen

Werbung

Zurück
Oben