Sehr geehrtes Forum,
da dies mein erster Einstieg ist, ersuche ich um Verständnis für eventuell ungeschickte Formulierungen. Danke.
Ich benutze einen HP Compaq 6910p mit installierten LM 18 Cinnamon 32-bit im Dauer-Netzbetrieb.
Vor einiger Zeit habe ich TLP aus den offiziellen Paketquellen installiert und einige Änderungen vorgenommen.
Möchte nun wissen, ob Ihr vielleicht Korrekturen oder Verbesserungen empfehlen könnt.
Die Ausgabe von (sudo) tlp-stat
--- TLP 0.8 --------------------------------------------
TLP_ENABLE=1
TLP_DEFAULT_MODE=AC
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=powersave
DISK_DEVICES="sda sdb"
DISK_APM_LEVEL_ON_AC="192 192"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC=medium_power
SATA_LINKPWR_ON_BAT=min_power
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
WOL_DISABLE=Y
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=auto
RUNTIME_PM_ON_BAT=auto
RUNTIME_PM_ALL=1
RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau"
USB_AUTOSUSPEND=1
USB_BLACKLIST_WWAN=1
RESTORE_DEVICE_STATE_ON_STARTUP=1
+++ System Info
System = Hewlett-Packard F.0A HP Compaq 6910p
BIOS = 68MCU Ver. F.0A
Release = Linux Mint 18 Sarah
Kernel = 4.4.0-21-generic #37-Ubuntu SMP Mon Apr 18 18:34:49 UTC 2016 i686
/proc/cmdline = BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=76033547-d6b1-4522-a231-953744938b1c ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7
Init system = systemd
+++ System Status
TLP power save = enabled
power source = AC
+++ Processor
CPU Model = Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz
/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = acpi-cpufreq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 800000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 1801000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 1801000 1800000 1200000 800000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = acpi-cpufreq
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 800000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 1801000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies = 1801000 1800000 1200000 800000 [kHz]
/sys/devices/system/cpu/cpufreq/boost = 1
x86_energy_perf_policy: program not installed.
/proc/sys/kernel/nmi_watchdog = 0
+++ Undervolting
PHC kernel not available.
+++ Temperatures
CPU temp = 47 [°C]
Fan speed = (not available)
+++ File System
/proc/sys/vm/laptop_mode = 0
/proc/sys/vm/dirty_writeback_centisecs = 1500
/proc/sys/vm/dirty_expire_centisecs = 1500
/proc/sys/vm/dirty_ratio = 20
/proc/sys/vm/dirty_background_ratio = 10
/proc/sys/fs/xfs/age_buffer_centisecs = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs = (not available)
+++ Storage Devices
/dev/sda:
Model = WDC WD1200BEVS-22UST0
Firmware = 01.01A01
APM Level = 192
Status = active/idle
Scheduler = deadline
+++ SATA Aggressive Link Power Management
/sys/class/scsi_host/host2/link_power_management_policy = medium_power
/sys/class/scsi_host/host3/link_power_management_policy = medium_power
/sys/class/scsi_host/host4/link_power_management_policy = medium_power
+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)
+++ Intel Graphics
/sys/module/i915/parameters/powersave = (not available)
/sys/module/i915/parameters/enable_rc6 = 0 (disabled)
/sys/module/i915/parameters/enable_fbc = -1 (use per-chip default)
/sys/module/i915/parameters/lvds_downclock = (not available)
/sys/module/i915/parameters/semaphores = -1 (use per-chip default)
+++ Wireless
bluetooth = none (no device)
wifi = none (no device)
wwan = off (software)
+++ Audio
/sys/module/snd_hda_intel/parameters/power_save = 0
/sys/module/snd_hda_intel/parameters/power_save_controller = N
+++ Runtime Power Management
device classes = all
device blacklist = (not configured)
driver blacklist = radeon nouveau
/sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, agpgart-intel)
/sys/bus/pci/devices/0000:00:02.0/power/control = auto (0x030000, VGA compatible controller, i915)
/sys/bus/pci/devices/0000:00:02.1/power/control = auto (0x038000, Display controller, no driver)
/sys/bus/pci/devices/0000:00:19.0/power/control = auto (0x020000, Ethernet controller, e1000e)
/sys/bus/pci/devices/0000:00:1a.0/power/control = auto (0x0c0300, USB controller, uhci_hcd)
/sys/bus/pci/devices/0000:00:1a.1/power/control = auto (0x0c0300, USB controller, uhci_hcd)
/sys/bus/pci/devices/0000:00:1a.7/power/control = auto (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1b.0/power/control = auto (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1c.0/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.4/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1d.0/power/control = auto (0x0c0300, USB controller, uhci_hcd)
/sys/bus/pci/devices/0000:00:1d.1/power/control = auto (0x0c0300, USB controller, uhci_hcd)
/sys/bus/pci/devices/0000:00:1d.2/power/control = auto (0x0c0300, USB controller, uhci_hcd)
/sys/bus/pci/devices/0000:00:1d.7/power/control = auto (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1e.0/power/control = auto (0x060401, PCI bridge, no driver)
/sys/bus/pci/devices/0000:00:1f.0/power/control = auto (0x060100, ISA bridge, lpc_ich)
/sys/bus/pci/devices/0000:00:1f.1/power/control = auto (0x01018a, IDE interface, ata_piix)
/sys/bus/pci/devices/0000:00:1f.2/power/control = auto (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:02:06.0/power/control = auto (0x060700, CardBus bridge, yenta_cardbus)
/sys/bus/pci/devices/0000:02:06.1/power/control = auto (0x060700, CardBus bridge, yenta_cardbus)
/sys/bus/pci/devices/0000:02:06.2/power/control = auto (0x0c0010, FireWire (IEEE 1394), firewire_ohci)
/sys/bus/pci/devices/0000:02:06.3/power/control = auto (0x080500, SD Host controller, sdhci-pci)
+++ USB
autosuspend = enabled
device whitelist = (not configured)
device blacklist = (not configured)
wwan blacklist = enabled
Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
Bus 007 Device 002 ID 15d9:0a4c control = on, autosuspend_delay_ms = 2000 -- Trust International B.V. USB+PS/2 Optical Mouse (usbhid)
Bus 007 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
Bus 006 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
Bus 005 Device 002 ID 08ff:2580 control = auto, autosuspend_delay_ms = 2000 -- AuthenTec, Inc. AES2501 Fingerprint Sensor (no driver)
Bus 005 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
Bus 004 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
Bus 003 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
+++ Battery Status
/sys/class/power_supply/C23B/manufacturer = Hewlett-Packard
/sys/class/power_supply/C23B/model_name = Primary
/sys/class/power_supply/C23B/cycle_count = (not supported)
/sys/class/power_supply/C23B/charge_full_design = 1825 [mAh]
/sys/class/power_supply/C23B/charge_full = 1825 [mAh]
/sys/class/power_supply/C23B/charge_now = 1825 [mAh]
/sys/class/power_supply/C23B/current_now = 0 [mA]
/sys/class/power_supply/C23B/status = Full
+++ Suggestions
* Install smartmontools for disk drive health info
da dies mein erster Einstieg ist, ersuche ich um Verständnis für eventuell ungeschickte Formulierungen. Danke.
Ich benutze einen HP Compaq 6910p mit installierten LM 18 Cinnamon 32-bit im Dauer-Netzbetrieb.
Vor einiger Zeit habe ich TLP aus den offiziellen Paketquellen installiert und einige Änderungen vorgenommen.
Möchte nun wissen, ob Ihr vielleicht Korrekturen oder Verbesserungen empfehlen könnt.
Die Ausgabe von (sudo) tlp-stat
--- TLP 0.8 --------------------------------------------
TLP_ENABLE=1
TLP_DEFAULT_MODE=AC
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=powersave
DISK_DEVICES="sda sdb"
DISK_APM_LEVEL_ON_AC="192 192"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC=medium_power
SATA_LINKPWR_ON_BAT=min_power
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
WOL_DISABLE=Y
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=auto
RUNTIME_PM_ON_BAT=auto
RUNTIME_PM_ALL=1
RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau"
USB_AUTOSUSPEND=1
USB_BLACKLIST_WWAN=1
RESTORE_DEVICE_STATE_ON_STARTUP=1
+++ System Info
System = Hewlett-Packard F.0A HP Compaq 6910p
BIOS = 68MCU Ver. F.0A
Release = Linux Mint 18 Sarah
Kernel = 4.4.0-21-generic #37-Ubuntu SMP Mon Apr 18 18:34:49 UTC 2016 i686
/proc/cmdline = BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=76033547-d6b1-4522-a231-953744938b1c ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7
Init system = systemd
+++ System Status
TLP power save = enabled
power source = AC
+++ Processor
CPU Model = Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz
/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = acpi-cpufreq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 800000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 1801000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 1801000 1800000 1200000 800000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver = acpi-cpufreq
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq = 800000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq = 1801000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies = 1801000 1800000 1200000 800000 [kHz]
/sys/devices/system/cpu/cpufreq/boost = 1
x86_energy_perf_policy: program not installed.
/proc/sys/kernel/nmi_watchdog = 0
+++ Undervolting
PHC kernel not available.
+++ Temperatures
CPU temp = 47 [°C]
Fan speed = (not available)
+++ File System
/proc/sys/vm/laptop_mode = 0
/proc/sys/vm/dirty_writeback_centisecs = 1500
/proc/sys/vm/dirty_expire_centisecs = 1500
/proc/sys/vm/dirty_ratio = 20
/proc/sys/vm/dirty_background_ratio = 10
/proc/sys/fs/xfs/age_buffer_centisecs = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs = (not available)
+++ Storage Devices
/dev/sda:
Model = WDC WD1200BEVS-22UST0
Firmware = 01.01A01
APM Level = 192
Status = active/idle
Scheduler = deadline
+++ SATA Aggressive Link Power Management
/sys/class/scsi_host/host2/link_power_management_policy = medium_power
/sys/class/scsi_host/host3/link_power_management_policy = medium_power
/sys/class/scsi_host/host4/link_power_management_policy = medium_power
+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)
+++ Intel Graphics
/sys/module/i915/parameters/powersave = (not available)
/sys/module/i915/parameters/enable_rc6 = 0 (disabled)
/sys/module/i915/parameters/enable_fbc = -1 (use per-chip default)
/sys/module/i915/parameters/lvds_downclock = (not available)
/sys/module/i915/parameters/semaphores = -1 (use per-chip default)
+++ Wireless
bluetooth = none (no device)
wifi = none (no device)
wwan = off (software)
+++ Audio
/sys/module/snd_hda_intel/parameters/power_save = 0
/sys/module/snd_hda_intel/parameters/power_save_controller = N
+++ Runtime Power Management
device classes = all
device blacklist = (not configured)
driver blacklist = radeon nouveau
/sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, agpgart-intel)
/sys/bus/pci/devices/0000:00:02.0/power/control = auto (0x030000, VGA compatible controller, i915)
/sys/bus/pci/devices/0000:00:02.1/power/control = auto (0x038000, Display controller, no driver)
/sys/bus/pci/devices/0000:00:19.0/power/control = auto (0x020000, Ethernet controller, e1000e)
/sys/bus/pci/devices/0000:00:1a.0/power/control = auto (0x0c0300, USB controller, uhci_hcd)
/sys/bus/pci/devices/0000:00:1a.1/power/control = auto (0x0c0300, USB controller, uhci_hcd)
/sys/bus/pci/devices/0000:00:1a.7/power/control = auto (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1b.0/power/control = auto (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1c.0/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.4/power/control = auto (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1d.0/power/control = auto (0x0c0300, USB controller, uhci_hcd)
/sys/bus/pci/devices/0000:00:1d.1/power/control = auto (0x0c0300, USB controller, uhci_hcd)
/sys/bus/pci/devices/0000:00:1d.2/power/control = auto (0x0c0300, USB controller, uhci_hcd)
/sys/bus/pci/devices/0000:00:1d.7/power/control = auto (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1e.0/power/control = auto (0x060401, PCI bridge, no driver)
/sys/bus/pci/devices/0000:00:1f.0/power/control = auto (0x060100, ISA bridge, lpc_ich)
/sys/bus/pci/devices/0000:00:1f.1/power/control = auto (0x01018a, IDE interface, ata_piix)
/sys/bus/pci/devices/0000:00:1f.2/power/control = auto (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:02:06.0/power/control = auto (0x060700, CardBus bridge, yenta_cardbus)
/sys/bus/pci/devices/0000:02:06.1/power/control = auto (0x060700, CardBus bridge, yenta_cardbus)
/sys/bus/pci/devices/0000:02:06.2/power/control = auto (0x0c0010, FireWire (IEEE 1394), firewire_ohci)
/sys/bus/pci/devices/0000:02:06.3/power/control = auto (0x080500, SD Host controller, sdhci-pci)
+++ USB
autosuspend = enabled
device whitelist = (not configured)
device blacklist = (not configured)
wwan blacklist = enabled
Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
Bus 007 Device 002 ID 15d9:0a4c control = on, autosuspend_delay_ms = 2000 -- Trust International B.V. USB+PS/2 Optical Mouse (usbhid)
Bus 007 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
Bus 006 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
Bus 005 Device 002 ID 08ff:2580 control = auto, autosuspend_delay_ms = 2000 -- AuthenTec, Inc. AES2501 Fingerprint Sensor (no driver)
Bus 005 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub)
Bus 004 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
Bus 003 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 1.1 root hub (hub)
+++ Battery Status
/sys/class/power_supply/C23B/manufacturer = Hewlett-Packard
/sys/class/power_supply/C23B/model_name = Primary
/sys/class/power_supply/C23B/cycle_count = (not supported)
/sys/class/power_supply/C23B/charge_full_design = 1825 [mAh]
/sys/class/power_supply/C23B/charge_full = 1825 [mAh]
/sys/class/power_supply/C23B/charge_now = 1825 [mAh]
/sys/class/power_supply/C23B/current_now = 0 [mA]
/sys/class/power_supply/C23B/status = Full
+++ Suggestions
* Install smartmontools for disk drive health info
.
