Tastatur/Trackpoint-Probleme X230 (Neu)

[kangundkodos]

Moin, ich habe von 2 Wochen oder sowas mein neues X230 bekommen und in den letzten Tagen aus irgendeinem Grund immer wieder Probleme mit der Tastatur, genauer gesagt mit dem Trackpoint. Mal abgesehen von der Tatsache, dass ich noch keine Möglichkeit gefunden habe ihn, oder das Touchpad unter Ubuntu auszuschalten, funktioniert er manchmal nach dem Startup schlicht und ergreifend nicht (die Tasten ebenfalls nicht).

Das verwirrt mich sehr, weil ich auch noch nirgends Einstellmöglichkeiten der Eingabegeräte gefunden habe, außer "Schnell und Langsam", Mausspur anzeigen und den Käse.

Gibt es eine Möglichkeit den Status der Eingabegeräte auszulesen oder ähnliches?

Unter Windows habe ich dieses Problem bisher noch nicht beobachten können, da ich es nicht sonderlich oft nutze. Es ist allerdings nicht unmöglich, dass sich das Problem auf Ubuntu beschränkt...

Wenn es denn wenigstens das Touchpad wäre, das ist so oder so doof....

Hat einer ne Idee?

​Gruß Thomas

 

[gatasa]

leider kenne ich mich nicht so gut bei linux aus, aber das touchpad sollte man im bios still legen können.
zumindest bei meinem x201t habe ich im bios unter config, dann keyboard/mouse das touchpad auf disabled gestellt.

gruß in't huus

gatasa

 

[linrunner]

Ich verstehe deine äußerst verschlungenen Erläuterungen so:

Beim Starten von Ubuntu bleibt manchmal der Trackpoint samt Tasten ohne Funktion.

Insofern solltest Du deinen Post mal ein wenig aufräumen, insbesondere "Tastatur" gehört aus dem Titel entfernt und das Touchpad-Thema lenkt genauso ab.

ps. ich bitte die Moderation um Verschiebung nach "Linux".

 

[hha81667]

ps. ich bitte die Moderation um Verschiebung nach "Linux".

Isser doch schon...

 

[alroar]

Da warn die Münchner aber wieder mal schnell

kangundkodos, mal bitte die Ausgabe von "dmesg" posten. am besten einmal von dann, wenns geht und einmal wenns nicht geht.

 

[linrunner]

Da hätte ich doch fast den Lösungsansatz vergessen. Wenn es wieder auftritt, lade mal das zuständige Kernelmodul neu:

sudo modprobe -rv psmouse
sudo modprobe -v psmouse

Falls das hilft, kannst Du als Workaround für den Systemstart das Paket trackpoint-psmouse-reload von hier probieren (Direktlink).

 

[kangundkodos]

Danke für die vielen Meldungen

leider kenne ich mich nicht so gut bei linux aus, aber das touchpad sollte man im bios still legen können.
zumindest bei meinem x201t habe ich im bios unter config, dann keyboard/mouse das touchpad auf disabled gestellt.

gruß in't huus

gatasa

Ja, da hab ich nachgeguckt. Das steht standard-mäßig auf enabled für beides

Ich verstehe deine äußerst verschlungenen Erläuterungen so:

Beim Starten von Ubuntu bleibt manchmal der Trackpoint samt Tasten ohne Funktion.

Insofern solltest Du deinen Post mal ein wenig aufräumen, insbesondere "Tastatur" gehört aus dem Titel entfernt und das Touchpad-Thema lenkt genauso ab.

ps. ich bitte die Moderation um Verschiebung nach "Linux".

1. Ja, mein Ausdruck ist oft etwas langwierig. Ich ändere das gleich mal. Allerdings dünkte mir, dass Trackpoint und Tastatur rein baulich eine Einheit bilden. Gut, softwaretechnisch aller Wahrscheinlichkeit nach nicht...
2. Ja du hast mich richtig verstanden...

Isser doch schon...

Vielen Dank dafür

Da hätte ich doch fast den Lösungsansatz vergessen. Wenn es wieder auftritt, lade mal das zuständige Kernelmodul neu:

sudo modprobe -rv psmouse
sudo modprobe -v psmouse

Falls das hilft, kannst Du als Workaround für den Systemstart das Paket trackpoint-psmouse-reload von hier probieren (Direktlink).

Ok, wird gemacht!

Danke sehr

Da warn die Münchner aber wieder mal schnell

kangundkodos, mal bitte die Ausgabe von "dmesg" posten. am besten einmal von dann, wenns geht und einmal wenns nicht geht.

[  312.732837] audit_printk_skb: 39 callbacks suppressed[  312.732843] type=1400 audit(1370961256.485:24): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=996 comm="cupsd" pid=996 comm="cupsd" capability=36  capname="block_suspend"
[  718.534688] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
[  718.534691] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
[  718.534693] thinkpad_ec: initial ec test failed
[  718.598261] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
[  718.598268] thinkpad_acpi: unhandled HKEY event 0x6040
[  718.598271] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[  718.598959] thinkpad_acpi: EC reports that Thermal Table has changed
[  719.018743] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
[  719.018750] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
[  719.018753] thinkpad_ec: initial ec test failed
[  719.891255] PM: Syncing filesystems ... done.
[  719.892554] PM: Preparing system for mem sleep
[  720.042324] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  720.058295] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  720.074254] PM: Entering mem sleep
[  720.074305] Suspending console(s) (use no_console_suspend to debug)
[  720.204174] PM: suspend of drv:psmouse dev:serio2 complete after 130.084 msecs
[  720.204305] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[  720.204533] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  720.204562] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 1 ep 0 with no TDs queued?
[  720.204658] sd 0:0:0:0: [sda] Stopping disk
[  720.205228] sd 2:0:0:0: [sdb] Stopping disk
[  720.413773] ACPI handle has no context!
[  720.429361] i915 0000:00:02.0: power state changed by ACPI to D3
[  720.532973] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 119.678 msecs
[  720.894250] PM: suspend of drv:sd dev:2:0:0:0 complete after 691.720 msecs
[  720.894296] PM: suspend of drv:scsi dev:target2:0:0 complete after 691.704 msecs
[  720.894305] PM: suspend of drv:scsi dev:host2 complete after 691.413 msecs
[  720.894410] PM: suspend of drv: dev:ata3 complete after 691.417 msecs
[  720.927749] PM: suspend of drv:sd dev:0:0:0:0 complete after 725.069 msecs
[  720.927794] PM: suspend of drv:scsi dev:target0:0:0 complete after 725.077 msecs
[  720.927822] PM: suspend of drv:scsi dev:host0 complete after 724.995 msecs
[  720.944004] PM: suspend of drv: dev:ata1 complete after 741.136 msecs
[  720.959877] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 547.879 msecs
[  720.959930] PM: suspend of drv: dev:pci0000:00 complete after 547.428 msecs
[  720.959950] PM: suspend of devices complete after 887.826 msecs
[  720.959951] PM: suspend devices took 0.888 seconds
[  720.960094] PM: late suspend of devices complete after 0.141 msecs
[  720.975976] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[  720.991807] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[  720.991887] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[  721.007765] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[  721.023790] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
[  721.039684] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3

[  724.284544] PM: Finishing wakeup.
[  724.286195] usb 3-2: USB disconnect, device number 2
[  724.284545] Restarting tasks ... done.
[  724.290975] video LNXVIDEO:00: Restoring backlight state
[  724.592138] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
[  724.592142] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
[  724.592144] thinkpad_ec: initial ec test failed
[  724.836635] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[  724.940357] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[  724.942536] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  726.071412] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
[  726.079447] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  726.085226] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  726.375076] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  726.381718] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[  726.486517] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  726.532316] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[  726.628758] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[  726.628766] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  726.628770] usb 1-1.4: Product: BCM20702A0
[  726.628774] usb 1-1.4: Manufacturer: Broadcom Corp
[  726.628777] usb 1-1.4: SerialNumber: F4B7E2CE4E27
[  727.152763] usbcore: registered new interface driver btusb
[  727.197461] Bluetooth: can't load firmware, may not work correctly
[  727.796619] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[  727.811618] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0

[ 1776.520455] PM: Preparing system for mem sleep
[ 1776.753990] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1776.769970] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1776.785930] PM: Entering mem sleep
[ 1776.785980] Suspending console(s) (use no_console_suspend to debug)
[ 1776.942757] PM: suspend of drv:psmouse dev:serio2 complete after 157.060 msecs
[ 1776.942900] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[ 1776.943170] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1776.943279] sd 0:0:0:0: [sda] Stopping disk
[ 1776.943848] sd 2:0:0:0: [sdb] Stopping disk
[ 1777.177366] ACPI handle has no context!
[ 1777.192912] i915 0000:00:02.0: power state changed by ACPI to D3
[ 1777.644946] PM: suspend of drv:sd dev:2:0:0:0 complete after 703.851 msecs
[ 1777.644973] PM: suspend of drv:scsi dev:target2:0:0 complete after 703.817 msecs
[ 1777.645003] PM: suspend of drv:scsi dev:host2 complete after 703.591 msecs
[ 1777.645054] PM: suspend of drv: dev:ata3 complete after 703.587 msecs
[ 1777.659569] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 483.884 msecs
[ 1777.659620] PM: suspend of drv: dev:pci0000:00 complete after 483.473 msecs
[ 1777.659628] PM: suspend of devices complete after 875.803 msecs
[ 1777.659630] PM: suspend devices took 0.876 seconds

[ 1778.814355] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 1778.834078] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
[ 1778.835129] Extended CMOS year: 2000
[ 1778.901869] PM: resume of drv: dev:ep_00 complete after 120.013 msecs
[ 1778.901875] PM: resume of drv:hub dev:3-0:1.0 complete after 120.050 msecs
[ 1778.901887] PM: resume of drv: dev:ep_81 complete after 120.048 msecs
[ 1778.901945] PM: resume of drv:hub dev:4-0:1.0 complete after 120.060 msecs
[ 1778.901948] PM: resume of drv: dev:ep_00 complete after 120.033 msecs
[ 1778.901995] PM: resume of drv: dev:ep_81 complete after 120.095 msecs
[ 1778.957761] PM: resume of drv: dev:ep_00 complete after 175.572 msecs
[ 1778.957763] PM: resume of drv:hub dev:1-1:1.0 complete after 175.638 msecs
[ 1778.957785] PM: resume of drv:hub dev:2-1:1.0 complete after 175.629 msecs
[ 1778.957786] PM: resume of drv: dev:ep_81 complete after 175.665 msecs
[ 1778.957791] PM: resume of drv:usb dev:1-1.6 complete after 175.502 msecs
[ 1778.957793] PM: resume of drv: dev:ep_00 complete after 175.655 msecs
[ 1778.957794] PM: resume of drv: dev:ep_81 complete after 175.627 msecs
[ 1778.957802] PM: resume of drv:usb dev:1-1.3 complete after 175.618 msecs
[ 1779.006015] PM: resume of drv:usb dev:1-1.3:1.0 complete after 223.932 msecs
[ 1779.006040] PM: resume of drv: dev:ep_02 complete after 223.941 msecs
[ 1779.006042] PM: resume of drv: dev:ep_81 complete after 223.953 msecs
[ 1779.006045] PM: resume of drv: dev:ep_83 complete after 223.936 msecs
[ 1779.006051] PM: resume of drv: dev:ep_00 complete after 223.930 msecs
[ 1779.029754] usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
[ 1779.121304] ata5: SATA link down (SStatus 0 SControl 300)
[ 1779.129277] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1779.133082] PM: resume of drv:uvcvideo dev:1-1.6:1.0 complete after 351.223 msecs
[ 1779.133112] PM: resume of drv: dev:ep_00 complete after 351.230 msecs
[ 1779.133116] PM: resume of drv: dev:ep_81 complete after 351.253 msecs
[ 1779.133161] PM: resume of drv:uvcvideo dev:1-1.6:1.1 complete after 351.289 msecs
[ 1779.137302] PM: resume of drv:scsi dev:host4 complete after 355.743 msecs
[ 1779.137310] PM: resume of drv:scsi_host dev:host4 complete after 355.742 msecs
[ 1779.145235] ata2: SATA link down (SStatus 0 SControl 300)
[ 1779.163314] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1779.163320] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1779.169205] PM: resume of drv:scsi dev:host1 complete after 387.783 msecs
[ 1779.169225] PM: resume of drv:scsi_host dev:host1 complete after 387.800 msecs
[ 1779.275635] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1779.275648] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1779.276138] ata3.00: configured for UDMA/100
[ 1779.288915] PM: resume of drv:scsi dev:host2 complete after 507.785 msecs
[ 1779.288925] PM: resume of drv:scsi_host dev:host2 complete after 507.787 msecs
[ 1779.288931] PM: resume of drv:scsi dev:target2:0:0 complete after 507.527 msecs
[ 1779.288941] PM: resume of drv:sd dev:2:0:0:0 complete after 507.524 msecs
[ 1779.288946] sd 2:0:0:0: [sdb] Starting disk
[ 1779.289201] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 507.765 msecs
[ 1780.956595] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1780.957734] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1780.957738] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1780.960115] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1780.960120] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1780.961196] ata1.00: configured for UDMA/133
[ 1780.976616] PM: resume of drv:scsi dev:host0 complete after 2199.942 msecs
[ 1780.976617] PM: resume of drv:ata_port dev:ata1 complete after 1699.936 msecs
[ 1780.976629] PM: resume of drv:scsi_host dev:host0 complete after 2199.945 msecs
[ 1780.976650] PM: resume of drv:scsi dev:target0:0:0 complete after 2199.767 msecs
[ 1780.976661] PM: resume of drv:sd dev:0:0:0:0 complete after 2199.761 msecs
[ 1780.976666] sd 0:0:0:0: [sda] Starting disk
[ 1780.997562] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2220.691 msecs
[ 1780.998370] PM: resume of devices complete after 2224.214 msecs
[ 1780.998439] PM: resume devices took 2.224 seconds
[ 1780.998482] PM: Finishing wakeup.
[ 1780.998482] Restarting tasks ... done.
[ 1781.004543] video LNXVIDEO:00: Restoring backlight state
[ 1781.108189] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
[ 1781.124888] usb 4-3: New USB device found, idVendor=0480, idProduct=a007
[ 1781.124897] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1781.124903] usb 4-3: Product: External USB 3.0
[ 1781.124908] usb 4-3: Manufacturer: Toshiba
[ 1781.124913] usb 4-3: SerialNumber: 20121213012550F
[ 1781.130885] Initializing USB Mass Storage driver...
[ 1781.131276] scsi6 : usb-storage 4-3:1.0
[ 1781.131701] usbcore: registered new interface driver usb-storage
[ 1781.131706] USB Mass Storage support registered.
[ 1781.196006] usb 2-1.8: new high-speed USB device number 3 using ehci_hcd
[ 1781.265868] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
[ 1781.265874] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
[ 1781.265877] thinkpad_ec: initial ec test failed
[ 1781.288507] usb 2-1.8: New USB device found, idVendor=17ef, idProduct=100a
[ 1781.288515] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1781.289279] hub 2-1.8:1.0: USB hub found
[ 1781.289427] hub 2-1.8:1.0: 6 ports detected
[ 1781.483503] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 1781.559285] usb 2-1.8.4: new low-speed USB device number 4 using ehci_hcd
[ 1781.587057] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 1781.589904] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1781.592651] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 1781.599252] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 1781.643791] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
[ 1781.643794] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
[ 1781.643796] thinkpad_ec: initial ec test failed
[ 1781.681781] usb 2-1.8.4: New USB device found, idVendor=046a, idProduct=0023
[ 1781.681791] usb 2-1.8.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1781.716926] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1781.894396] usb 2-1.8.2: new high-speed USB device number 5 using ehci_hcd
[ 1781.988007] usb 2-1.8.2: New USB device found, idVendor=04f9, idProduct=0248
[ 1781.988015] usb 2-1.8.2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 1781.988019] usb 2-1.8.2: SerialNumber: E69739D1N401823
[ 1782.126354] scsi 6:0:0:0: Direct-Access     Toshiba  External USB 3.0 0    PQ: 0 ANSI: 6
[ 1782.128401] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 1782.130749] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1782.130994] sd 6:0:0:0: [sdc] Write Protect is off
[ 1782.130998] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 1782.131242] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1782.157912]  sdc: sdc1 sdc2 sdc3
[ 1782.170516] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 1782.507905] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.4/2-1.8.4:1.0/input/input18
[ 1782.508743] cherry 0003:046A:0023.0003: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.8.4/input0
[ 1782.509580] usblp 2-1.8.2:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0248
[ 1782.509706] usbcore: registered new interface driver usblp
[ 1782.512272] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.4/2-1.8.4:1.1/input/input19
[ 1782.512385] cherry 0003:046A:0023.0004: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.8.4/input1
[ 1783.566991] usblp0: removed
[ 1783.571245] type=1400 audit(1370965536.683:26): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=996 comm="cupsd" pid=996 comm="cupsd" capability=36  capname="block_suspend"
[ 1783.573590] usblp 2-1.8.2:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0248
[ 1783.629742] type=1400 audit(1370965536.743:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=996 comm="cupsd" pid=996 comm="cupsd" capability=36  capname="block_suspend"
[ 1789.240420] wlan0: authenticate with 00:15:0c:c5:dc:65
[ 1789.248265] wlan0: send auth to 00:15:0c:c5:dc:65 (try 1/3)
[ 1789.250543] wlan0: authenticated
[ 1789.251255] wlan0: associate with 00:15:0c:c5:dc:65 (try 1/3)
[ 1789.257992] wlan0: RX AssocResp from 00:15:0c:c5:dc:65 (capab=0x411 status=0 aid=4)
[ 1789.264293] wlan0: associated
[ 1789.266780] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1805.150867] usb 1-1.2: new full-speed USB device number 6 using ehci_hcd
[ 1805.246884] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c526
[ 1805.246892] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1805.246896] usb 1-1.2: Product: USB Receiver
[ 1805.246899] usb 1-1.2: Manufacturer: Logitech
[ 1805.249361] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input20
[ 1805.249609] hid-generic 0003:046D:C526.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
[ 1805.251812] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input21
[ 1805.252131] hid-generic 0003:046D:C526.0006: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1

So, ich hoffe ich hab jetzt alles abgearbeitet. Jetzt gehts ans grillen!

einen schönen Abend euch!

Edith: die Beschränkung auf 20k Zeichen hat mich etwas ausgebremst. Ich hoffe ich hab jetzt nicht das wichtigste rausgelöscht...!

 

[kangundkodos]

Wir sind grad mal wieder außer Funktion. Das ist die Ausgabe von dmesg..

[    0.542963] ashmem: initialized[    0.543041] TCP: cubic registered
[    0.543110] NET: Registered protocol family 10
[    0.543227] NET: Registered protocol family 17
[    0.543233] Key type dns_resolver registered
[    0.543327] PM: Hibernation image not present or could not be loaded.
[    0.543335] registered taskstats version 1
[    0.543630] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.545206] Key type trusted registered
[    0.546833] Key type encrypted registered
[    0.548747]   Magic number: 1:94:679
[    0.548848] rtc_cmos 00:07: setting system clock to 2013-06-12 10:41:27 UTC (1371033687)
[    0.553947] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.553948] EDD information not available.
[    0.554975] Freeing unused kernel memory: 948k freed
[    0.555055] Write protecting the kernel read-only data: 12288k
[    0.557362] Freeing unused kernel memory: 1364k freed
[    0.559257] Freeing unused kernel memory: 1064k freed
[    0.568787] udevd[99]: starting version 175
[    0.588509] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[    0.588512] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[    0.588554] e1000e 0000:00:19.0: setting latency timer to 64
[    0.588613] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.588648] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    0.603716] sdhci: Secure Digital Host Controller Interface driver
[    0.603719] sdhci: Copyright(c) Pierre Ossman
[    0.604868] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4)
[    0.605043] mmc0: no vmmc regulator found
[    0.605069] Registered led device: mmc0::
[    0.635721] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[    0.789495] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:96:dc:8d
[    0.789497] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    0.789560] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    0.789612] ahci 0000:00:1f.2: version 3.0
[    0.789675] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.789708] ahci: SSS flag set, parallel bus scan disabled
[    0.803319] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[    0.803327] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    0.803336] ahci 0000:00:1f.2: setting latency timer to 64
[    0.827584] scsi0 : ahci
[    0.827663] scsi1 : ahci
[    0.827738] scsi2 : ahci
[    0.827806] scsi3 : ahci
[    0.827878] scsi4 : ahci
[    0.827943] scsi5 : ahci
[    0.828349] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 42
[    0.828352] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 42
[    0.828354] ata3: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538200 irq 42
[    0.828355] ata4: DUMMY
[    0.828357] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 42
[    0.828358] ata6: DUMMY
[    0.835210] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    0.967628] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.967630] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.968101] hub 1-1:1.0: USB hub found
[    0.968334] hub 1-1:1.0: 6 ports detected
[    1.078589] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.146427] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.147396] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.147403] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.148333] ata1.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133
[    1.148339] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.149420] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.149427] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.150353] ata1.00: configured for UDMA/133
[    1.150589] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5
[    1.150693] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.150695] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.150697] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.150734] sd 0:0:0:0: [sda] Write Protect is off
[    1.150737] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.150751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.210656] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.210662] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.211022] hub 2-1:1.0: USB hub found
[    1.211115] hub 2-1:1.0: 8 ports detected
[    1.282255] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[    1.375959] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
[    1.375961] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.375962] usb 1-1.3: Product: Biometric Coprocessor
[    1.375963] usb 1-1.3: Manufacturer: Auth
[    1.445947] usb 1-1.6: new high-speed USB device number 4 using ehci_hcd
[    1.457619] Refined TSC clocksource calibration: 2893.429 MHz.
[    1.457626] Switching to clocksource tsc
[    1.469581] ata2: SATA link down (SStatus 0 SControl 300)
[    1.475102]  sda: sda1 sda2 sda3
[    1.475489] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.545959] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[    1.545965] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.545969] usb 1-1.6: Product: Integrated Camera
[    1.545972] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    1.796746] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.797193] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.797201] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.797635] ata3.00: ATA-9: M4-CT256M4SSD3, 07MH, max UDMA/100
[    1.797637] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.798147] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.798154] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.798539] ata3.00: configured for UDMA/100
[    1.798734] scsi 2:0:0:0: Direct-Access     ATA      M4-CT256M4SSD3   07MH PQ: 0 ANSI: 5
[    1.798826] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.798835] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.798886] sd 2:0:0:0: [sdb] Write Protect is off
[    1.798888] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.798952] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.799629]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[    1.800146] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.115926] ata5: SATA link down (SStatus 0 SControl 300)
[    2.153462] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.387611] Adding 15624188k swap on /dev/sdb5.  Priority:-1 extents:1 across:15624188k SS
[    3.394131] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.397092] udevd[399]: starting version 175
[    3.418898] lp: driver loaded but no devices found
[    3.431716] wmi: Mapper loaded
[    3.432102] mei 0000:00:16.0: setting latency timer to 64
[    3.432465] type=1400 audit(1371026490.383:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=520 comm="apparmor_parser"
[    3.432774] type=1400 audit(1371026490.387:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=520 comm="apparmor_parser"
[    3.432951] type=1400 audit(1371026490.387:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=520 comm="apparmor_parser"
[    3.436534] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[    3.442948] [drm] Initialized drm 1.1.0 20060810
[    3.469850] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[    3.471673] i915 0000:00:02.0: power state changed by ACPI to D0
[    3.471678] i915 0000:00:02.0: power state changed by ACPI to D0
[    3.472659] i915 0000:00:02.0: setting latency timer to 64
[    3.473561] pci 0000:00:00.0: Intel Ivybridge Chipset
[    3.473622] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.474470] pci 0000:00:00.0: detected 65536K stolen memory
[    3.485037] cfg80211: Calling CRDA to update world regulatory domain
[    3.486568] Non-volatile memory driver v1.3
[    3.493692] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[    3.494244] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[    3.494247] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[    3.494388] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[    3.494390] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90006630000
[    3.494392] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[    3.494711] iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X
[    3.495744] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    3.495747] thinkpad_acpi: http://ibm-acpi.sf.net/
[    3.495748] thinkpad_acpi: ThinkPad BIOS G2ET94WW (2.54 ), EC unknown
[    3.495749] thinkpad_acpi: Lenovo ThinkPad X230, model 2325CN9
[    3.496396] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    3.496499] thinkpad_acpi: radio switch found; radios are enabled
[    3.496608] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    3.496609] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    3.498421] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[    3.498848] Registered led device: tpacpi::thinklight
[    3.498887] Registered led device: tpacpi::power
[    3.498917] Registered led device: tpacpi::standby
[    3.498944] Registered led device: tpacpi::thinkvantage
[    3.498951] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    3.499064] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    3.500560] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input4
[    3.505805] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    3.505815] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.505816] [drm] Driver supports precise vblank timestamp query.
[    3.506422] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.516355] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
[    3.575298] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[    3.576083] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
[    3.576286] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    3.576288] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    3.576290] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    3.576292] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[    3.576293] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[    3.576296] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    3.576472] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[    3.583034] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
[    3.591072] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[    3.592575] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[    3.593613] cfg80211: World regulatory domain updated:
[    3.593615] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    3.593617] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.593618] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    3.593620] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    3.593621] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.593622] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.593940] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.594358] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[    3.594364] iwlwifi 0000:03:00.0: Device SKU: 0x1F0
[    3.594365] iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[    3.594385] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[    3.595961] Registered led device: phy0-led
[    3.595983] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[    3.599085] kvm: disabled by bios
[    3.603154] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    3.671625] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[    3.695372] kvm: disabled by bios
[    3.705875] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[    3.799803] kvm: disabled by bios
[    3.990683] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    4.035247] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[    4.131386] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[    4.131388] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.131390] usb 1-1.4: Product: BCM20702A0
[    4.131391] usb 1-1.4: Manufacturer: Broadcom Corp
[    4.131392] usb 1-1.4: SerialNumber: F4B7E2CE4E27
[    4.200310] init: failsafe main process (951) killed by TERM signal
[    4.225004] ppdev: user-space parallel port driver
[    4.232268] Bluetooth: Core ver 2.16
[    4.233020] NET: Registered protocol family 31
[    4.233022] Bluetooth: HCI device and connection manager initialized
[    4.233024] Bluetooth: HCI socket layer initialized
[    4.233025] Bluetooth: L2CAP socket layer initialized
[    4.233029] Bluetooth: SCO socket layer initialized
[    4.234943] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800
[    4.234949] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    4.235757] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.235760] Bluetooth: BNEP filters: protocol multicast
[    4.238168] type=1400 audit(1371026491.191:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1029 comm="apparmor_parser"
[    4.238523] type=1400 audit(1371026491.195:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1029 comm="apparmor_parser"
[    4.242825] Bluetooth: RFCOMM TTY layer initialized
[    4.242831] Bluetooth: RFCOMM socket layer initialized
[    4.242832] Bluetooth: RFCOMM ver 1.11
[    4.248737] type=1400 audit(1371026491.203:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1057 comm="apparmor_parser"
[    4.256676] type=1400 audit(1371026491.211:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1062 comm="apparmor_parser"
[    4.257137] type=1400 audit(1371026491.211:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1059 comm="apparmor_parser"
[    4.257512] type=1400 audit(1371026491.211:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1062 comm="apparmor_parser"
[    4.269228] fbcon: inteldrmfb (fb0) is primary device
[    4.269825] Console: switching to colour frame buffer device 170x48
[    4.269840] fb0: inteldrmfb frame buffer device
[    4.269841] drm: registered panic notifier
[    4.277120] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    4.283448] acpi device:00: registered as cooling_device4
[    4.283625] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    4.283658] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    4.283745] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.284112] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251)
[    4.284117] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.284119] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[    4.284124] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251)
[    4.284127] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.284133] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120320/utaddress-251)
[    4.284141] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.284142] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.284247] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    4.327690] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
[    4.327693] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
[    4.327694] thinkpad_ec: initial ec test failed
[    4.337267] acpi_call: Module loaded successfully
[    4.347906] acpi_call: Calling \_SB.PCI0.LPC.EC.HKEY.BDSG 0x1
[    4.348201] acpi_call: Call successful: 0x700
[    4.357585] acpi_call: Calling \_SB.PCI0.LPC.EC.HKEY.BCSG 0x1
[    4.357987] acpi_call: Call successful: 0x35f
[    4.365171] acpi_call: Calling \_SB.PCI0.LPC.EC.HKEY.BCTG 0x1
[    4.365568] acpi_call: Call successful: 0x323
[    4.404759] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    4.505833] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    4.506797] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.507199] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.508919] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[    4.515538] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[    4.726343] thinkpad_ec: thinkpad_ec_request_row: arg0 rejected: (0x01:0x00)->0x00
[    4.726346] thinkpad_ec: thinkpad_ec_read_row: failed requesting row: (0x01:0x00)->0xfffffffb
[    4.726347] thinkpad_ec: initial ec test failed
[    4.816719] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[    4.823279] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[    4.841553] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    4.841680] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    4.841771] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9

 

[kangundkodos]

Das hat geholfen!

Vielen Dank. Mir diesem Workaround beschäftige ich mich nachher mal..

Gruß Thomas

​

Da hätte ich doch fast den Lösungsansatz vergessen. Wenn es wieder auftritt, lade mal das zuständige Kernelmodul neu:

sudo modprobe -rv psmouse
sudo modprobe -v psmouse

Falls das hilft, kannst Du als Workaround für den Systemstart das Paket trackpoint-psmouse-reload von hier probieren (Direktlink).

 

[linrunner]

Der Workaround automatisiert einfach das Neuladen von psmouse.

@alroar: wenn psmouse abgestürzt ist, loggt es leider auch nicht mehr.

 

[16R]

kannst du mal posten was bei Dir im Ordner /ect/X11/xorg.conf.d/ rumliegt ? Mit den synaptics.conf hast du nicht schon rumgespielt ?

Gruß
16R .. der den Entwickler des Touchpads auch verflucht - jeden Tag aufs neue

 

[dirkk]

Ich habe jetzt nicht genau verfolgt, welches Problem genau du hast. Ich hatte jedenfalls beim X230 auch Probleme mit dem Touchpad (Cursor-Jumping), und da habe ich folgende Datei

Section "InputClass"
        Identifier "touchpad"
        MatchProduct "SynPS/2 Synaptics TouchPad"
        Driver "synaptics"
        # fix touchpad resolution
        Option "VertResolution" "100"
        Option "HorizResolution" "65"
        # disable synaptics driver pointer acceleration
        Option "MinSpeed" "1"
        Option "MaxSpeed" "1"
        # tweak the X-server pointer acceleration
        Option "AccelerationProfile" "2"
        Option "AdaptiveDeceleration" "16"
        Option "ConstantDeceleration" "16"
        Option "VelocityScale" "32"
EndSection

in

/usr/share/X11/xorg.conf.d/50-touchpad.conf

abgelegt. Dadurch wurde bei mir die Problematik zu 98% Prozent behoben. Keine Ahnung, ob es auch auf den Trackpoint Auswirkungen hat.

 

[MartinMenke]

Ausschalten des Touchpads geht im BIOS.
Probleme mit der den Touchpoint-Tasten hatte ich unter 12.10 auch, da bin ich zurück zu 12.04, wo es "Out of the Box" keine Probleme gab. Mittlerweile habe ich zwei Dist-Upgrades auf 13.04 gemacht und alles läuft einwandfrei.

 

[kangundkodos]

Grundsätzlich: Die Methode von Linrunner hat erstmal funktioniert. Ich hab das Paket installiert und werd mal sehen wie es sich morgen auf der Arbeit so schlägt

kannst du mal posten was bei Dir im Ordner /ect/X11/xorg.conf.d/ rumliegt ? Mit den synaptics.conf hast du nicht schon rumgespielt ?

Gruß
16R .. der den Entwickler des Touchpads auch verflucht - jeden Tag aufs neue

​Öhm, in dem Verzeichnis hab ich komischerweise keinen Ordner names "xorg.conf.d", warum auch immer.. WIe die Entwickler auf die Idee mit DIESEM Touchpad gekommen sind, frage ich mich auch...

Ich habe jetzt nicht genau verfolgt, welches Problem genau du hast. Ich hatte jedenfalls beim X230 auch Probleme mit dem Touchpad (Cursor-Jumping), und da habe ich folgende Datei

Section "InputClass"
        Identifier "touchpad"
        MatchProduct "SynPS/2 Synaptics TouchPad"
        Driver "synaptics"
        # fix touchpad resolution
        Option "VertResolution" "100"
        Option "HorizResolution" "65"
        # disable synaptics driver pointer acceleration
        Option "MinSpeed" "1"
        Option "MaxSpeed" "1"
        # tweak the X-server pointer acceleration
        Option "AccelerationProfile" "2"
        Option "AdaptiveDeceleration" "16"
        Option "ConstantDeceleration" "16"
        Option "VelocityScale" "32"
EndSection

in

/usr/share/X11/xorg.conf.d/50-touchpad.conf

abgelegt. Dadurch wurde bei mir die Problematik zu 98% Prozent behoben. Keine Ahnung, ob es auch auf den Trackpoint Auswirkungen hat.

Bei mir funktioniert der Trackpoint unregelmäßig nicht...

Ausschalten des Touchpads geht im BIOS.
Probleme mit der den Touchpoint-Tasten hatte ich unter 12.10 auch, da bin ich zurück zu 12.04, wo es "Out of the Box" keine Probleme gab. Mittlerweile habe ich zwei Dist-Upgrades auf 13.04 gemacht und alles läuft einwandfrei.

Ja, die Option im Bios kannte ich.. Aber ich will ja beides benutzen können. Un, bei Bedarf in Ubuntu entweder Trackpoint oder Touchpad ausschalten können...

Dank und Gruß,

Thomas

 

[dirkk]

DerPfad ist wahrscheinlich

/usr/share/X11

Also ich finde das Touchpad richtig gut.

Kann man es bei Unity nicht abstellen? Bei Gnome geht das in den Systemeinstellungen. Außerdem gibt es eine Extension.

 

[kangundkodos]

[IMG=http://img16.imageshack.us/img16/765/bildschirmfotovom201306k.png][/IMG]

DerPfad ist wahrscheinlich

/usr/share/X11

Also ich finde das Touchpad richtig gut.

Kann man es bei Unity nicht abstellen? Bei Gnome geht das in den Systemeinstellungen. Außerdem gibt es eine Extension.

Ich hba unter 12.04 noch nix gefunden...
​

 

[linrunner]

Gibts nicht in Unity, wobei der Dialog dort aus Gnome3 stammt.

Hat das X230 keine Entsprechung zu Fn+F8? Damit schalte ich das Touchpad am X220.

Kann man aber auch über die Kommandozeile ein-/ausschalten. Erst den Gerätenamen ermitteln per

xinput list

Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ TPPS/2 IBM TrackPoint id=17 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=15 [slave pointer (2)]

Dann:

xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Device Enabled" 8 0 # aus
xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Device Enabled" 8 1 # ein

Tastenkürzel dazu anzulegen schaffst Du selbst ...

 

[dirkk]

Gibts nicht in Unity, wobei der Dialog dort aus Gnome3 stammt.

Deswegen bin ich überrascht, da es in Gnome3 ja geht.

 

[MartinMenke]

Es geht doch! Zumindest unter Ubuntu 13.04

Ich habe es grade ausprobiert und das Touchpad im BIOS aktiviert. Und dann erscheint in der Systemeinstellungen unter "Maus und Touchpad" ein weiter Abschnitt für Einstellungen zum Touchpad. Und man kann es da An- und ausschalten, die Zeigergeschwindigkeit ändern u.a.

 

[linrunner]

Die Frage bezog sich aber auf Ubuntu 12.04, also bringt es dem TE nichts, wenn ihr hier mit neueren Versionen oder Fedora ankommt. Wobei es schon etwas seltsam ist, wenn plötzlich in Gnome3 Einstellungen hinzu kommen ...