T61p - Ubuntu 12.4 tlp und thinkfan -> Lüfter >3000 U/min

stolli83

stolli83

Member
Themenstarter
Registriert
14 Jan. 2008
Beiträge
30
Servus Gemeinde,

anbei das Ergebnis von tlp stat

Code: 
--- TLP 0.3.7.1 --------------------------------------------

+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
DISK_DEVICES="sda sdb"
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
WOL_DISABLE=Y
SOUND_POWER_SAVE=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
USB_AUTOSUSPEND=1
RESTORE_DEVICE_STATE_ON_STARTUP=0


+++ System Info
System = LENOVO ThinkPad T61p 4402392
BIOS = 7LETD0WW (2.30 )
Release = Ubuntu 12.04.1 LTS
Kernel = 3.2.0-35-generic x86_64
/proc/cmdline = BOOT_IMAGE=/boot/vmlinuz-3.2.0-35-generic root=UUID=8fc0f156-78a3-494a-9f20-058b3e877b2c ro quiet splash vt.handoff=7


+++ System Status
TLP power save = enabled
power source = battery


+++ Processor
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq =   800000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq =  2401000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies =  2401000 2400000 2000000 1600000 1200000  800000 [kHz]


/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq =   800000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq =  2401000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies =  2401000 2400000 2000000 1600000 1200000  800000 [kHz]


/proc/sys/kernel/nmi_watchdog = 0


+++ Undervolting
PHC kernel not available.


+++ Temperatures
/proc/acpi/ibm/thermal = 45 39 30 48 50 -128 30 -128 31 41 40 -128 -128 -128 -128 -128 [°C]
/proc/acpi/ibm/fan     =  3077 [/min]


+++ File System
/proc/sys/vm/laptop_mode = 2
/proc/sys/vm/dirty_writeback_centisecs = 6000
/proc/sys/vm/dirty_expire_centisecs = 6000
/proc/sys/vm/dirty_ratio = 60
/proc/sys/vm/dirty_background_ratio = 1
/proc/sys/fs/xfs/age_buffer_centisecs = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs = (not available)


+++ Storage Devices
/dev/sda:
          Model     = takeMS SSD UTX-2200 120GB               
          Firmware  = 5.0.2   
          APM Level = 128
          TRIM      = supported
          scheduler = cfq


        SMART info:
            5 Reallocated_Sector_Ct     =        0 
            9 Power_On_Hours            = 2147483647 [h]
          177 Wear_Leveling_Count       =        0 [%]
          194 Temperature_Celsius       =       30 (Min/Max 30/30)  [°C]
          231 Temperature_Celsius       =        0    [°C]
          233 Media_Wearout_Indicator   =        0 [%]
          241 Total_LBAs_Written        =    0.000 [TB]


/dev/sdb:
          Model     = Hitachi HCC547550A9E380                 
          Firmware  = JE3OA60C
          APM Level = 128
          scheduler = cfq


        SMART info:
            4 Start_Stop_Count          =      101 
            5 Reallocated_Sector_Ct     =        0 
            9 Power_On_Hours            =       74 [h]
          193 Load_Cycle_Count          =      109 
          194 Temperature_Celsius       =       29 (Min/Max 18/42)  [°C]




+++ SATA Aggressive Link Power Management
No AHCI-enabled host controller detected.


+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (disabled by kernel)


+++ Wireless
bluetooth = off (software)
wifi      = on
wwan      = none (no device)


wlan0(iwl4965): power management = off (disabled by kernel)


+++ Audio
/sys/module/snd_hda_intel/parameters/power_save = 1
/sys/module/snd_hda_intel/parameters/power_save_controller = Y


+++ ThinkPad Battery (Main)
/sys/devices/platform/smapi/BAT0/manufacturer = Panasonic
/sys/devices/platform/smapi/BAT0/model = 92P1133
/sys/devices/platform/smapi/BAT0/manufacture_date = 2008-07-01
/sys/devices/platform/smapi/BAT0/first_use_date = 2008-08-21
/sys/devices/platform/smapi/BAT0/cycle_count = 65
/sys/devices/platform/smapi/BAT0/design_capacity = 84240 [mWh]
/sys/devices/platform/smapi/BAT0/last_full_capacity = 73050 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_capacity = 47260 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_percent = 65 [%]
/sys/devices/platform/smapi/BAT0/remaining_running_time_now = 92 [min]
/sys/devices/platform/smapi/BAT0/remaining_charging_time = not_charging [min]
/sys/devices/platform/smapi/BAT0/power_now = -28695 [mW]
/sys/devices/platform/smapi/BAT0/power_avg = -30227 [mW]


/sys/devices/platform/smapi/BAT0/start_charge_thresh = 96 [%]
/sys/devices/platform/smapi/BAT0/stop_charge_thresh = 100 [%]
/sys/devices/platform/smapi/BAT0/force_discharge = 0


+++ Runtime Power Management
/sys/bus/pci/devices/0000:00:00.0/power/control = auto [Host]
/sys/bus/pci/devices/0000:00:19.0/power/control = auto [Ethernet]
/sys/bus/pci/devices/0000:00:1b.0/power/control = auto [Audio]
/sys/bus/pci/devices/0000:03:00.0/power/control = auto [Wireless]
/sys/bus/pci/devices/0000:15:00.1/power/control = auto [Firewire]
/sys/bus/pci/devices/0000:15:00.2/power/control = auto [SD]
/sys/bus/pci/devices/0000:15:00.4/power/control = auto [Card]
/sys/bus/pci/devices/0000:15:00.5/power/control = auto [Card]


+++ USB
tlp usb autosuspend = enabled
tlp usb blacklist = (not configured)


Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =  2000 -- Linux Foundation 2.0 root hub (hub)
Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =  2000 -- Linux Foundation 2.0 root hub (hub)
Bus 003 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms =  2000 -- Linux Foundation 1.1 root hub (hub)
Bus 004 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms =  2000 -- Linux Foundation 1.1 root hub (hub)
Bus 005 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms =  2000 -- Linux Foundation 1.1 root hub (hub)
Bus 006 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms =  2000 -- Linux Foundation 1.1 root hub (hub)
Bus 007 Device 001 ID 1d6b:0001 control = auto, autosuspend_delay_ms =  2000 -- Linux Foundation 1.1 root hub (hub)
Bus 003 Device 002 ID 0483:2016 control = auto, autosuspend_delay_ms =  2000 -- SGS Thomson Microelectronics Fingerprint Reader (no driver)
Bus 006 Device 002 ID 17ef:1003 control = auto, autosuspend_delay_ms =  2000 -- Lenovo Integrated Smart Card Reader (no driver)

Wo ist mein Fehler...oder läuft das T61p generell so laut.

Bin grade recht zufrieden mit meiner Installation und möchte nun ungern was anderes ausprobieren :-/
Ich hoffe ihr könnt mir helfen.

Gruß
 
Hi,

ohne deine /etc/thinkfan.conf läßt sich schlecht etwas dazu sagen :(.

EDITH (hat nichts mit dem Lüfter zu tun): ist es Absicht, dass Du deine SSD/HDD mit angezogener Handbremse (SATA Mode = Compatible) fährst?
+++ SATA Aggressive Link Power Management
No AHCI-enabled host controller detected.
Zum Vergrößern anklicken....

EDITH2
+++ Temperatures
/proc/acpi/ibm/thermal = 45 39 30 48 50 -128 30 -128 31 41 40 -128 -128 -128 -128 -128 [°C]
Zum Vergrößern anklicken....
Laut thinkwiki hat das T61p eine "Besonderheit" beim 6cell Akku:
5 9-Cell Battery - Secondary yes static @ 50C on 6-cell
Zum Vergrößern anklicken....
Scheint bei dir aber auch auch den 9cell zuzutreffen.

Den 5. Sensor wirst Du also mit einem Offset in /etc/thinkfan.conf zum Schweigen bringen müssen:
Code: 
sensor /proc/acpi/ibm/thermal (0, 0, 0, 0, -50, 0, 0, 0, 0, 0, 0)
 
Zuletzt bearbeitet:
Servus linrunner,

ne Absicht nicht, eher Unwissenheit. Wie ziehe ich das denn grade? Habe ein SSD für / und hdd für /home.

Code: 
####################################################################### thinkfan 0.7 example config file
# ================================
#
# ATTENTION: There is only very basic sanity checking on the configuration.
# That means you can set your temperature limits as insane as you like. You
# can do anything stupid, e.g. turn off your fan when your CPU reaches 70°C.
#
# That's why this program is called THINKfan: You gotta think for yourself.
#
######################################################################
#
# IBM/Lenovo Thinkpads (thinkpad_acpi, /proc/acpi/ibm)
# ====================================================
#
# IMPORTANT:
#
# To keep your HD from overheating, you have to specify a correction value for
# the sensor that has the HD's temperature. You need to do this because
# thinkfan uses only the highest temperature it can find in the system, and
# that'll most likely never be your HD, as most HDs are already out of spec
# when they reach 55 °C.
# Correction values are applied from left to right in the same order as the
# temperatures are read from the file.
#
# For example:
# sensor /proc/acpi/ibm/thermal (0, 0, 10)
# will add a fixed value of 10 °C the 3rd value read from that file. Check out
# http://www.thinkwiki.org/wiki/Thermal_Sensors to find out how much you may
# want to add to certain temperatures.


#  Syntax:
#  (LEVEL, LOW, HIGH)
#  LEVEL is the fan level to use (0-7 with thinkpad_acpi)
#  LOW is the temperature at which to step down to the previous level
#  HIGH is the temperature at which to step up to the next level
#  All numbers are integers.
#


# I use this on my T61p:
sensor /proc/acpi/ibm/thermal (0, 10, 15, 2, 10, 5, 0, 3, 0, 3)


(0,	0,	55)
(1,	48,	60)
(2,	50,	61)
(3,	52,	63)
(4,	56,	65)
(5,	59,	66)
(7,	63,	32767)
 
Lüfter: lies meine EDITHs oben. Deine Sensor-Offsets scheinen mir auch etwas seltsam zusammengewürfelt. Nimm erstmal meinen Vorschlag.

SATA-Mode: stellst Du im BIOS um. Vorsicht: ein paralleles Windows blauschirmt dann.
 
Zuletzt bearbeitet:
Perfekt, dank dir!

Dies:
Den 5. Sensor wirst Du also mit einem Offset in /etc/thinkfan.conf zum Schweigen bringen müssen:
Code:


sensor /proc/acpi/ibm/thermal (0, 0, 0, 0, -50, 0, 0, 0, 0, 0, 0)
Zum Vergrößern anklicken....

Hat schon einen riesen Unterschied gebracht :-D
 
Ich hatte die thinkfan.conf eigentlich gar nicht verändert, da da ja schon drin stand, dass die Werte für en T61p wären.
 
Könntest du mir noch bitte behilflich sein, wie ich das mit dem SATA Mode richtig mache?
 
Im BIOS unter "Config -> Serial ATA (SATA)" die "SATA Controller Mode Option" von "Compatible" auf "AHCI" stellen. Siehe meine obige Warnung falls Windows-Dualboot installiert.
 
Nein, da es bisher rein optisch so schön läuft und ich in der Vergangenheit da schonmal Probleme hatte.

Sollte ich? Bringt mir das Vorteile oder Nachteile?

Und welchen bräuchte ich für das T61p...Current, 173, 96?
 
Zuletzt bearbeitet:
Der Stromverbrauch dürfte deutlich sinken. Ich weiß leider nicht welcher Treiber der richtige ist (ich kaufe grundsätzlich nur Intel-Modelle). Macht Ubuntu keinen Vorschlag wenn Du den Dialog aufrufst?
 
Ich habe nun den Current Treiber von nvidia installiert, dieser wurde mir von Ubuntu empfohlen.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
  • ok1.de
  • ok2.de
  • thinkstore24.de
  • Preiswerte-IT - Gebrauchte Lenovo Notebooks kaufen

Werbung

Zurück
Oben