[gelöst] X220 - Akku lässt sich nicht rekalibrieren

[Frieder108]

Hi,

wie es schon im Titel steht, ich kann den Akku des X220 nicht rekalibrieren.

Als System ist Kubuntu 13.10 im Einsatz - ja, ich weiß, 13.10 ist noch ne Entwicklerversion, aber ich hab neulich mein 13.04 an die Wand gefahren und Neuinstallation war der einfachste Weg :facepalm:

Und da 13.10 ja schon im PPA verfügbar ist und Kubu 13.10 auf meiner Testmaschine gut läuft, hab ich den Schritt gewagt und es als Hauptsystem installiert.

OK, viele Worte → hier die Fakten

frieder@X220:~$ sudo tlp recalibrate
Setting temporary charge thresholds for BAT0:
  stop  = 100
  start => Warning: cannot set threshold.
Error: discharge function not available for this ThinkPad model.
frieder@X220:~$ sudo tlp recalibrate BAT0
Setting temporary charge thresholds for BAT0:
  stop  = 100
  start => Warning: cannot set threshold.
Error: discharge function not available for this ThinkPad model.
frieder@X220:~$

ratlos

Frieder


Nachtrag::

ich häng mal noch die "tlp-stat" mit ran

frieder@X220:~$ sudo tlp stat
[sudo] password for frieder: 
--- TLP 0.4 --------------------------------------------

+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
DISK_DEVICES="sda sdb"
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
WOL_DISABLE=Y
SOUND_POWER_SAVE=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
RUNTIME_PM_ALL=0
USB_AUTOSUSPEND=1
USB_BLACKLIST_WWAN=1
RESTORE_DEVICE_STATE_ON_STARTUP=0

+++ System Info
System         = LENOVO ThinkPad X220 42902WG
BIOS           = 8DET51WW (1.21 )
Release        = Ubuntu Saucy Salamander (development branch)
Kernel         = 3.11.0-11-generic x86_64
/proc/cmdline  = BOOT_IMAGE=/boot/vmlinuz-3.11.0-11-generic root=UUID=e01c82d1-7647-4994-b2cc-a73c9cb98c35 ro quiet splash vt.handoff=7

+++ System Status
TLP power save = enabled
power source   = ac

+++ Processor
CPU Model      = Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz

/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies = 2601000 2600000 2400000 2200000 2000000 1800000 1600000 1400000 1200000 1000000 800000 [kHz]

/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_available_frequencies = 2601000 2600000 2400000 2200000 2000000 1800000 1600000 1400000 1200000 1000000 800000 [kHz]

/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_available_frequencies = 2601000 2600000 2400000 2200000 2000000 1800000 1600000 1400000 1200000 1000000 800000 [kHz]

/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver    = acpi-cpufreq
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor  = ondemand
/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq  =   800000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq  =  2601000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_available_frequencies = 2601000 2600000 2400000 2200000 2000000 1800000 1600000 1400000 1200000 1000000 800000 [kHz]

/sys/devices/system/cpu/cpufreq/boost                  = 1
/proc/sys/kernel/nmi_watchdog                          = 0

+++ Undervolting
PHC kernel not available.

+++ Temperatures
CPU temp               =    48 [°C]
/proc/acpi/ibm/fan     =  1968 [/min]

+++ File System
/proc/sys/vm/laptop_mode               =     0
/proc/sys/vm/dirty_writeback_centisecs =  1500
/proc/sys/vm/dirty_expire_centisecs    =  1500
/proc/sys/vm/dirty_ratio               =    20
/proc/sys/vm/dirty_background_ratio    =    10
/proc/sys/fs/xfs/age_buffer_centisecs  = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs    = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs     = (not available)

+++ Storage Devices
/dev/sda:
          Model     = SAMSUNG SSD 830 Series                  
          Firmware  = CXM02B1Q
          APM Level = none/disabled
          Status    = active/idle
          TRIM      = supported
          scheduler = deadline

        SMART info:
            5 Reallocated_Sector_Ct     =        0 
            9 Power_On_Hours            =     2715 [h]
          177 Wear_Leveling_Count       =       99 [%]
          179 Used_Rsvd_Blk_Cnt_Tot     =        0 
          190 Airflow_Temperature_Cel   =       33 [°C]
          241 Total_LBAs_Written        =    1.086 [TB]


+++ SATA Aggressive Link Power Management
/sys/class/scsi_host/host0/link_power_management_policy  = max_performance
/sys/class/scsi_host/host1/link_power_management_policy  = max_performance
/sys/class/scsi_host/host2/link_power_management_policy  = max_performance
/sys/class/scsi_host/host3/link_power_management_policy  = max_performance
/sys/class/scsi_host/host4/link_power_management_policy  = max_performance
/sys/class/scsi_host/host5/link_power_management_policy  = max_performance

+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)

+++ Intel Graphics
/sys/module/i915/parameters/powersave        =  1 (enabled)
/sys/module/i915/parameters/i915_enable_rc6  = -1 (use per-chip default)
/sys/module/i915/parameters/i915_enable_fbc  = -1 (use per-chip default)
/sys/module/i915/parameters/lvds_downclock   =  0 (disabled)
/sys/module/i915/parameters/semaphores       = -1 (use per-chip default)

+++ Wireless
bluetooth = none (no device)
wifi      = on
wwan      = on

wlan0(iwlwifi): power management = off

+++ Audio
/sys/module/snd_hda_intel/parameters/power_save            = 1
/sys/module/snd_hda_intel/parameters/power_save_controller = Y

+++ ThinkPad Extended Battery Functions
tp-smapi   = active
tpacpi-bat = inactive (kernel module 'acpi_call' not installed)

+++ ThinkPad Battery Status (Main)
/sys/devices/platform/smapi/BAT0/manufacturer               = SANYO
/sys/devices/platform/smapi/BAT0/model                      = 42T4940
/sys/devices/platform/smapi/BAT0/manufacture_date           = 2011-06-07
/sys/devices/platform/smapi/BAT0/first_use_date             = 2011-11-07
/sys/devices/platform/smapi/BAT0/cycle_count                =     93
/sys/devices/platform/smapi/BAT0/design_capacity            =  86580 [mWh]
/sys/devices/platform/smapi/BAT0/last_full_capacity         =  75160 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_capacity         =  75130 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_percent          =    100 [%]
/sys/devices/platform/smapi/BAT0/remaining_running_time_now = not_discharging [min]
/sys/devices/platform/smapi/BAT0/remaining_charging_time    = not_charging [min]
/sys/devices/platform/smapi/BAT0/power_now                  =      0 [mW]
/sys/devices/platform/smapi/BAT0/power_avg                  =      0 [mW]

/sys/devices/platform/smapi/BAT0/start_charge_thresh        = (not available) 
/sys/devices/platform/smapi/BAT0/stop_charge_thresh         =    100 [%]
/sys/devices/platform/smapi/BAT0/force_discharge            = (not available)

+++ Runtime Power Management
/sys/bus/pci/devices/0000:00:00.0/power/control = on   (0x060000 Host bridge)
/sys/bus/pci/devices/0000:00:02.0/power/control = on   (0x030000 VGA compatible controller)
/sys/bus/pci/devices/0000:00:16.0/power/control = on   (0x078000 Communication controller)
/sys/bus/pci/devices/0000:00:16.3/power/control = on   (0x070002 Serial controller)
/sys/bus/pci/devices/0000:00:19.0/power/control = on   (0x020000 Ethernet controller)
/sys/bus/pci/devices/0000:00:1a.0/power/control = on   (0x0c0320 USB controller)
/sys/bus/pci/devices/0000:00:1b.0/power/control = on   (0x040300 Audio device)
/sys/bus/pci/devices/0000:00:1c.0/power/control = on   (0x060400 PCI bridge)
/sys/bus/pci/devices/0000:00:1c.1/power/control = on   (0x060400 PCI bridge)
/sys/bus/pci/devices/0000:00:1c.3/power/control = on   (0x060400 PCI bridge)
/sys/bus/pci/devices/0000:00:1c.4/power/control = on   (0x060400 PCI bridge)
/sys/bus/pci/devices/0000:00:1d.0/power/control = on   (0x0c0320 USB controller)
/sys/bus/pci/devices/0000:00:1f.0/power/control = on   (0x060100 ISA bridge)
/sys/bus/pci/devices/0000:00:1f.2/power/control = on   (0x010601 SATA controller)
/sys/bus/pci/devices/0000:00:1f.3/power/control = on   (0x0c0500 SMBus)
/sys/bus/pci/devices/0000:03:00.0/power/control = on   (0x028000 Network controller)
/sys/bus/pci/devices/0000:0d:00.0/power/control = on   (0x088001 System peripheral)

+++ USB
tlp usb autosuspend = enabled
tlp usb blacklist   = (not configured)

Bus 002 Device 004 ID 0bdb:1911 control = on,   autosuspend_delay_ms =  2000 -- Ericsson Business Mobile Networks BV  (cdc_acm, cdc_wdm, cdc_ncm)
Bus 002 Device 005 ID 04f9:01f4 control = on,   autosuspend_delay_ms =  2000 -- Brother Industries, Ltd MFC-5890CN (usblp, usb-storage)
Bus 002 Device 002 ID 8087:0024 control = auto, autosuspend_delay_ms =  2000 -- Intel Corp. Integrated Rate Matching Hub (hub)
Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =  2000 -- Linux Foundation 2.0 root hub (hub)
Bus 001 Device 004 ID 04f2:b217 control = auto, autosuspend_delay_ms =  2000 -- Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP) (uvcvideo)
Bus 001 Device 003 ID 145f:0143 control = on,   autosuspend_delay_ms =  2000 -- Trust  (snd-usb-audio, usbhid)
Bus 001 Device 002 ID 8087:0024 control = auto, autosuspend_delay_ms =  2000 -- Intel Corp. Integrated Rate Matching Hub (hub)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =  2000 -- Linux Foundation 2.0 root hub (hub)

+++ Suggestions
* Install acpi-call kernel module for ThinkPad advanced battery functions

frieder@X220:~$

 

[linrunner]

Steht doch da:

tpacpi-bat = inactive (kernel module 'acpi_call' not installed)

acpi-call-tools (re)installieren würde ich sagen.

 

[Frieder108]

Steht doch da:

acpi-call-tools (re)installieren würde ich sagen.

:facepalm: Herr, lass es Hirn regnen

ja Danke - das wars → Rekalibrierung läuft :thumbup:

 

[linrunner]

Herr, lass es Hirn regnen

Aber aber, wer wird denn gleich herumballern?

 

[Frieder108]

Aber aber, wer wird denn gleich herumballern?

Ich - ich muß mich mal wieder über mich selbst ärgern → da wird einem die Lösung auf dem Präsentierteller geliefert und ich habs schlicht übersehen :facepalm:

Grüßle

Frieder