- Registriert
- 20 Apr. 2007
- Beiträge
- 74.298
Ich habe ein T420, dessen Partition C: ich verkleinern wollte. Da es UEFI hat, besorgte ich mir eine gparted live 0.18.0.1-amd64. Die ISO bootete auch sauber vom USB-Stick, den ich mit Yumi eingerichtet habe, nur zeigt das Partitionierungsprogramm eine 465 GB große Festplatte (sdb) ohne die darauf befindlichen fünf Windows 7 64 Bit - Partitionen an (Meldung: "unallocated").
"dmesg" zeigt, dass die Partitionen aber beim Booten erkannt wurden. Was mich stutzig macht, ist der RAID-6, am Ende.
Hat jemand eine Idee, was da los sein könnte?
(sdb ist der USB-Stick)
...
[ 0.589764] rtc_cmos 00:06: setting system clock to 2014-09-16 10:53:21 UTC (1410864801)
[ 0.589807] PM: Hibernation image not present or could not be loaded.
[ 0.590400] Freeing unused kernel memory: 972K (ffffffff818ab000 - ffffffff8199e000)
[ 0.590401] Write protecting the kernel read-only data: 8192k
[ 0.593405] Freeing unused kernel memory: 1408K (ffff8800014a0000 - ffff880001600000)
[ 0.594400] Freeing unused kernel memory: 452K (ffff88000178f000 - ffff880001800000)
[ 0.595499] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.653143] systemd-udevd[69]: starting version 204
[ 0.666889] pps_core: LinuxPPS API ver. 1 registered
[ 0.666893] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.667051] PTP clock support registered
[ 0.668078] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.668082] ACPI: Thermal Zone [THM0] (49 C)
[ 0.668950] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.668953] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.669065] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.669126] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.669151] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 0.673993] ACPI: bus type USB registered
[ 0.674023] usbcore: registered new interface driver usbfs
[ 0.674032] usbcore: registered new interface driver hub
[ 0.675473] usbcore: registered new device driver usb
[ 0.675770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.675892] ehci-pci: EHCI PCI platform driver
[ 0.683862] sdhci: Secure Digital Host Controller Interface driver
[ 0.683865] sdhci: Copyright(c) Pierre Ossman
[ 0.684397] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5)
[ 0.684450] pcieport 0000:00:1c.4: driver skip pci_set_master, fix it!
[ 0.684689] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 0.685690] SCSI subsystem initialized
[ 0.688204] libata version 3.00 loaded.
[ 0.871028] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.871032] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:b7:10:34
[ 0.871041] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.871090] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 0.871223] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.871230] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.871235] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.871249] ehci-pci 0000:00:1a.0: debug port 2
[ 0.875145] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.875152] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf252a000
[ 0.886990] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.887121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.887123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.887125] usb usb1: Product: EHCI Host Controller
[ 0.887126] usb usb1: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[ 0.887127] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.887345] hub 1-0:1.0: USB hub found
[ 0.887351] hub 1-0:1.0: 3 ports detected
[ 0.887573] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.887578] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.887582] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.887593] ehci-pci 0000:00:1d.0: debug port 2
[ 0.891503] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.891520] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2529000
[ 0.902988] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.903100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.903103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.903104] usb usb2: Product: EHCI Host Controller
[ 0.903105] usb usb2: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[ 0.903106] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.903323] hub 2-0:1.0: USB hub found
[ 0.903330] hub 2-0:1.0: 3 ports detected
[ 0.903492] ahci 0000:00:1f.2: version 3.0
[ 0.903615] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.903732] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.918930] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.918934] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.918939] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.943455] scsi0 : ahci
[ 0.943564] scsi1 : ahci
[ 0.943629] scsi2 : ahci
[ 0.943717] scsi3 : ahci
[ 0.943775] scsi4 : ahci
[ 0.943843] scsi5 : ahci
[ 0.943890] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 41
[ 0.943893] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 41
[ 0.943894] ata3: DUMMY
[ 0.943896] ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 41
[ 0.943898] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 41
[ 0.943899] ata6: DUMMY
[ 1.199118] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.263086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.264360] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.264371] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.264378] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.303395] ata1.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100
[ 1.303411] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.305751] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.305763] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.305769] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.307618] ata1.00: configured for UDMA/100
[ 1.307939] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0003 PQ: 0 ANSI: 5
[ 1.331776] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.331786] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.332245] hub 1-1:1.0: USB hub found
[ 1.332461] hub 1-1:1.0: 6 ports detected
[ 1.443141] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.567114] tsc: Refined TSC clocksource calibration: 2491.905 MHz
[ 1.575778] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.575787] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.576330] hub 2-1:1.0: USB hub found
[ 1.576446] hub 2-1:1.0: 8 ports detected
[ 1.627148] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.630062] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.630463] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.630472] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.632254] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[ 1.635517] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.635968] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.635976] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.637758] ata2.00: configured for UDMA/100
[ 1.640335] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7710H 1.S0 PQ: 0 ANSI: 5
[ 1.647278] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.742749] usb 1-1.1: New USB device found, idVendor=1307, idProduct=0165
[ 1.742758] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.742763] usb 1-1.1: Product: USB Mass Storage Device
[ 1.742767] usb 1-1.1: Manufacturer: USBest Technology
[ 1.742770] usb 1-1.1: SerialNumber: 0804095377e252
[ 1.747371] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 1.747484] scsi6 : usb-storage 1-1.1:1.0
[ 1.747580] usbcore: registered new interface driver usb-storage
[ 1.815351] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.914186] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221
[ 1.914196] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.914201] usb 1-1.6: Product: Integrated Camera
[ 1.914205] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 1.959220] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.987386] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 2.086347] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
[ 2.086356] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.086361] usb 2-1.5: Product: Integrated Smart Card Reader
[ 2.086364] usb 2-1.5: Manufacturer: Lenovo
[ 2.279245] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.287749] sr0: scsi3-mmc drive: 47x/47x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.287756] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.287938] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.289592] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.289729] sd 0:0:0:0: [sda] Write Protect is off
[ 2.289733] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.289780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.290560] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.290645] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.372110] sda: sda1 sda2 sda3 < sda5 > sda4
[ 2.373787] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.567360] Switched to clocksource tsc
[ 2.748522] scsi 6:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[ 2.748911] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.750120] sd 6:0:0:0: [sdb] 1974272 512-byte logical blocks: (1.01 GB/964 MiB)
[ 2.751111] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.751119] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 2.752176] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2.752231] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.757313] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2.757371] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.817337] sdb:
[ 2.821095] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2.821167] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.821220] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.609691] device-mapper: uevent: version 1.0.3
[ 3.609813] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 3.730267] FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 3.750301] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.751382] aufs 3.12-20131111
[ 3.766107] loop: module loaded
[ 4.079023] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 10.993156] systemd-udevd[727]: starting version 204
[ 11.363457] cfg80211: Calling CRDA to update world regulatory domain
[ 11.437995] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130725/utaddress-251)
[ 11.438002] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.438006] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 11.438009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.438010] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 11.438013] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.438014] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 11.438016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.438018] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.520229] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 11.520232] Copyright(c) 2003-2013 Intel Corporation
[ 11.520288] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[ 11.520371] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 11.520555] iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
[ 11.539504] ACPI: Requesting acpi_cpufreq
[ 11.556570] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 11.603246] mei_me 0000:00:16.0: setting latency timer to 64
[ 11.603287] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 11.624911] iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-6000-4.ucode (-2)
[ 11.719736] ACPI: AC Adapter [AC] (on-line)
[ 11.721386] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 11.731362] ACPI: Lid Switch [LID]
[ 11.731407] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 11.731412] ACPI: Sleep Button [SLPB]
[ 11.731463] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 11.731466] ACPI: Power Button [PWRF]
[ 11.733899] ACPI: Battery Slot [BAT0] (battery present)
[ 11.736093] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 11.775201] thinkpad_acpi: Unknown symbol snd_ctl_add (err 0)
[ 11.775213] thinkpad_acpi: Unknown symbol snd_card_register (err 0)
[ 11.775218] thinkpad_acpi: Unknown symbol snd_card_free (err 0)
[ 11.775243] thinkpad_acpi: Unknown symbol snd_ctl_new1 (err 0)
[ 11.775260] thinkpad_acpi: Unknown symbol snd_ctl_boolean_mono_info (err 0)
[ 11.775275] thinkpad_acpi: Unknown symbol nvram_write_byte (err 0)
[ 11.775279] thinkpad_acpi: Unknown symbol snd_ctl_notify (err 0)
[ 11.775286] thinkpad_acpi: Unknown symbol nvram_read_byte (err 0)
[ 11.775328] thinkpad_acpi: Unknown symbol snd_card_create (err 0)
[ 11.799464] [drm] Initialized drm 1.1.0 20060810
[ 11.847384] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[ 11.865093] wmi: Mapper loaded
[ 11.867144] iwlwifi 0000:03:00.0: no suitable firmware found!
[ 11.904793] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 11.971395] iTCO_vendor_support: vendor-support=0
[ 12.083342] [drm] Memory usable by graphics device = 2048M
[ 12.083348] i915 0000:00:02.0: setting latency timer to 64
[ 12.104133] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 12.104141] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.104141] [drm] Driver supports precise vblank timestamp query.
[ 12.104193] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem
wns=io+mem
[ 12.121376] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 12.121412] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 12.121515] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.157523] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 12.157526] [drm] This can cause pipe underruns and display issues.
[ 12.157526] [drm] Please upgrade your BIOS to fix this.
[ 12.228805] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 12.246521] fbcon: inteldrmfb (fb0) is primary device
[ 12.258889] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 12.260738] alg: No test for crc32 (crc32-pclmul)
[ 12.284554] kvm: disabled by bios
[ 12.297185] kvm: disabled by bios
[ 12.317371] kvm: disabled by bios
[ 13.028520] Console: switching to colour frame buffer device 200x56
[ 13.035686] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.035689] i915 0000:00:02.0: registered panic notifier
[ 13.063051] acpi device:01: registered as cooling_device5
[ 13.063174] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 13.063263] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 13.063458] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.075230] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
[ 13.075245] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 13.127534] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 13.817386] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 15.207874] fuse init (API version 7.22)
[ 15.354584] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 15.420917] JFS: nTxBlock = 8192, nTxLock = 65536
[ 16.938336] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 18.577519] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 18.857533] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[ 79.904040] xor: automatically using best checksumming function:
[ 79.940230] avx : 22888.000 MB/sec
[ 80.032252] raid6: sse2x1 8618 MB/s
[ 80.100255] raid6: sse2x2 10670 MB/s
[ 80.168271] raid6: sse2x4 12301 MB/s
[ 80.168272] raid6: using algorithm sse2x4 (12301 MB/s)
[ 80.168273] raid6: using ssse3x2 recovery algorithm
[ 80.219648] bio: create slab <bio-1> at 1
[ 80.219766] Btrfs loaded
[ 80.298018] NILFS version 2 loaded
"dmesg" zeigt, dass die Partitionen aber beim Booten erkannt wurden. Was mich stutzig macht, ist der RAID-6, am Ende.
Hat jemand eine Idee, was da los sein könnte?
(sdb ist der USB-Stick)
...
[ 0.589764] rtc_cmos 00:06: setting system clock to 2014-09-16 10:53:21 UTC (1410864801)
[ 0.589807] PM: Hibernation image not present or could not be loaded.
[ 0.590400] Freeing unused kernel memory: 972K (ffffffff818ab000 - ffffffff8199e000)
[ 0.590401] Write protecting the kernel read-only data: 8192k
[ 0.593405] Freeing unused kernel memory: 1408K (ffff8800014a0000 - ffff880001600000)
[ 0.594400] Freeing unused kernel memory: 452K (ffff88000178f000 - ffff880001800000)
[ 0.595499] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.653143] systemd-udevd[69]: starting version 204
[ 0.666889] pps_core: LinuxPPS API ver. 1 registered
[ 0.666893] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.667051] PTP clock support registered
[ 0.668078] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.668082] ACPI: Thermal Zone [THM0] (49 C)
[ 0.668950] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.668953] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.669065] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.669126] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.669151] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 0.673993] ACPI: bus type USB registered
[ 0.674023] usbcore: registered new interface driver usbfs
[ 0.674032] usbcore: registered new interface driver hub
[ 0.675473] usbcore: registered new device driver usb
[ 0.675770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.675892] ehci-pci: EHCI PCI platform driver
[ 0.683862] sdhci: Secure Digital Host Controller Interface driver
[ 0.683865] sdhci: Copyright(c) Pierre Ossman
[ 0.684397] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5)
[ 0.684450] pcieport 0000:00:1c.4: driver skip pci_set_master, fix it!
[ 0.684689] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 0.685690] SCSI subsystem initialized
[ 0.688204] libata version 3.00 loaded.
[ 0.871028] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.871032] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:b7:10:34
[ 0.871041] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.871090] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 0.871223] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.871230] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.871235] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.871249] ehci-pci 0000:00:1a.0: debug port 2
[ 0.875145] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.875152] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf252a000
[ 0.886990] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.887121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.887123] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.887125] usb usb1: Product: EHCI Host Controller
[ 0.887126] usb usb1: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[ 0.887127] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.887345] hub 1-0:1.0: USB hub found
[ 0.887351] hub 1-0:1.0: 3 ports detected
[ 0.887573] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.887578] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.887582] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.887593] ehci-pci 0000:00:1d.0: debug port 2
[ 0.891503] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.891520] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2529000
[ 0.902988] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.903100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.903103] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.903104] usb usb2: Product: EHCI Host Controller
[ 0.903105] usb usb2: Manufacturer: Linux 3.12-1-amd64 ehci_hcd
[ 0.903106] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.903323] hub 2-0:1.0: USB hub found
[ 0.903330] hub 2-0:1.0: 3 ports detected
[ 0.903492] ahci 0000:00:1f.2: version 3.0
[ 0.903615] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.903732] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.918930] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.918934] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.918939] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.943455] scsi0 : ahci
[ 0.943564] scsi1 : ahci
[ 0.943629] scsi2 : ahci
[ 0.943717] scsi3 : ahci
[ 0.943775] scsi4 : ahci
[ 0.943843] scsi5 : ahci
[ 0.943890] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 41
[ 0.943893] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 41
[ 0.943894] ata3: DUMMY
[ 0.943896] ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 41
[ 0.943898] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 41
[ 0.943899] ata6: DUMMY
[ 1.199118] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.263086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.264360] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.264371] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.264378] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.303395] ata1.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100
[ 1.303411] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.305751] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.305763] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.305769] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.307618] ata1.00: configured for UDMA/100
[ 1.307939] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0003 PQ: 0 ANSI: 5
[ 1.331776] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.331786] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.332245] hub 1-1:1.0: USB hub found
[ 1.332461] hub 1-1:1.0: 6 ports detected
[ 1.443141] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.567114] tsc: Refined TSC clocksource calibration: 2491.905 MHz
[ 1.575778] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.575787] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.576330] hub 2-1:1.0: USB hub found
[ 1.576446] hub 2-1:1.0: 8 ports detected
[ 1.627148] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.630062] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.630463] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.630472] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.632254] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[ 1.635517] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.635968] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.635976] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.637758] ata2.00: configured for UDMA/100
[ 1.640335] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7710H 1.S0 PQ: 0 ANSI: 5
[ 1.647278] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.742749] usb 1-1.1: New USB device found, idVendor=1307, idProduct=0165
[ 1.742758] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.742763] usb 1-1.1: Product: USB Mass Storage Device
[ 1.742767] usb 1-1.1: Manufacturer: USBest Technology
[ 1.742770] usb 1-1.1: SerialNumber: 0804095377e252
[ 1.747371] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 1.747484] scsi6 : usb-storage 1-1.1:1.0
[ 1.747580] usbcore: registered new interface driver usb-storage
[ 1.815351] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.914186] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221
[ 1.914196] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.914201] usb 1-1.6: Product: Integrated Camera
[ 1.914205] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 1.959220] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.987386] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 2.086347] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
[ 2.086356] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.086361] usb 2-1.5: Product: Integrated Smart Card Reader
[ 2.086364] usb 2-1.5: Manufacturer: Lenovo
[ 2.279245] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.287749] sr0: scsi3-mmc drive: 47x/47x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.287756] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.287938] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.289592] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.289729] sd 0:0:0:0: [sda] Write Protect is off
[ 2.289733] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.289780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.290560] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.290645] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.372110] sda: sda1 sda2 sda3 < sda5 > sda4
[ 2.373787] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.567360] Switched to clocksource tsc
[ 2.748522] scsi 6:0:0:0: Direct-Access Ut165 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[ 2.748911] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.750120] sd 6:0:0:0: [sdb] 1974272 512-byte logical blocks: (1.01 GB/964 MiB)
[ 2.751111] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.751119] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 2.752176] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2.752231] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.757313] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2.757371] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.817337] sdb:
[ 2.821095] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 2.821167] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.821220] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.609691] device-mapper: uevent: version 1.0.3
[ 3.609813] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 3.730267] FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 3.750301] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.751382] aufs 3.12-20131111
[ 3.766107] loop: module loaded
[ 4.079023] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 10.993156] systemd-udevd[727]: starting version 204
[ 11.363457] cfg80211: Calling CRDA to update world regulatory domain
[ 11.437995] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130725/utaddress-251)
[ 11.438002] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.438006] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 11.438009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.438010] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 11.438013] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.438014] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130725/utaddress-251)
[ 11.438016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.438018] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.520229] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 11.520232] Copyright(c) 2003-2013 Intel Corporation
[ 11.520288] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it!
[ 11.520371] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 11.520555] iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
[ 11.539504] ACPI: Requesting acpi_cpufreq
[ 11.556570] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 11.603246] mei_me 0000:00:16.0: setting latency timer to 64
[ 11.603287] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 11.624911] iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-6000-4.ucode (-2)
[ 11.719736] ACPI: AC Adapter [AC] (on-line)
[ 11.721386] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 11.731362] ACPI: Lid Switch [LID]
[ 11.731407] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 11.731412] ACPI: Sleep Button [SLPB]
[ 11.731463] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 11.731466] ACPI: Power Button [PWRF]
[ 11.733899] ACPI: Battery Slot [BAT0] (battery present)
[ 11.736093] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 11.775201] thinkpad_acpi: Unknown symbol snd_ctl_add (err 0)
[ 11.775213] thinkpad_acpi: Unknown symbol snd_card_register (err 0)
[ 11.775218] thinkpad_acpi: Unknown symbol snd_card_free (err 0)
[ 11.775243] thinkpad_acpi: Unknown symbol snd_ctl_new1 (err 0)
[ 11.775260] thinkpad_acpi: Unknown symbol snd_ctl_boolean_mono_info (err 0)
[ 11.775275] thinkpad_acpi: Unknown symbol nvram_write_byte (err 0)
[ 11.775279] thinkpad_acpi: Unknown symbol snd_ctl_notify (err 0)
[ 11.775286] thinkpad_acpi: Unknown symbol nvram_read_byte (err 0)
[ 11.775328] thinkpad_acpi: Unknown symbol snd_card_create (err 0)
[ 11.799464] [drm] Initialized drm 1.1.0 20060810
[ 11.847384] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[ 11.865093] wmi: Mapper loaded
[ 11.867144] iwlwifi 0000:03:00.0: no suitable firmware found!
[ 11.904793] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 11.971395] iTCO_vendor_support: vendor-support=0
[ 12.083342] [drm] Memory usable by graphics device = 2048M
[ 12.083348] i915 0000:00:02.0: setting latency timer to 64
[ 12.104133] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 12.104141] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.104141] [drm] Driver supports precise vblank timestamp query.
[ 12.104193] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem
wns=io+mem[ 12.121376] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 12.121412] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 12.121515] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.157523] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 12.157526] [drm] This can cause pipe underruns and display issues.
[ 12.157526] [drm] Please upgrade your BIOS to fix this.
[ 12.228805] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 12.246521] fbcon: inteldrmfb (fb0) is primary device
[ 12.258889] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 12.260738] alg: No test for crc32 (crc32-pclmul)
[ 12.284554] kvm: disabled by bios
[ 12.297185] kvm: disabled by bios
[ 12.317371] kvm: disabled by bios
[ 13.028520] Console: switching to colour frame buffer device 200x56
[ 13.035686] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.035689] i915 0000:00:02.0: registered panic notifier
[ 13.063051] acpi device:01: registered as cooling_device5
[ 13.063174] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 13.063263] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 13.063458] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.075230] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
[ 13.075245] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 13.127534] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 13.817386] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 15.207874] fuse init (API version 7.22)
[ 15.354584] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 15.420917] JFS: nTxBlock = 8192, nTxLock = 65536
[ 16.938336] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 18.577519] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 18.857533] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[ 79.904040] xor: automatically using best checksumming function:
[ 79.940230] avx : 22888.000 MB/sec
[ 80.032252] raid6: sse2x1 8618 MB/s
[ 80.100255] raid6: sse2x2 10670 MB/s
[ 80.168271] raid6: sse2x4 12301 MB/s
[ 80.168272] raid6: using algorithm sse2x4 (12301 MB/s)
[ 80.168273] raid6: using ssse3x2 recovery algorithm
[ 80.219648] bio: create slab <bio-1> at 1
[ 80.219766] Btrfs loaded
[ 80.298018] NILFS version 2 loaded
Zuletzt bearbeitet:
D) einen Usb-Stick mit der 32- und 64-Bit-Version erstellt und die 64-Bit-Version gebottet.
