Standby/Ruhezustand funktioniert nicht

C

ceego

New member
Registriert
18 Juli 2007
Beiträge
49
Hallo,
bei meinem T23 funktioniert der Ruhezustnad/Standby nicht. Weder in WinXp noch in Xubuntu. Wenn ich z.B. in Windows Standby auswähle schaltet er ab, nach 2 Sekunden bootet er wieder.
In Xubuntu (9.10) ähnlich, nur dass er hier 5 Minuten aushält. Xp und Linux sind jeweils auf dem aktuellsten Stand...
Kann mir jemand sagen was ich hier im BIOS einstellen muss?
Gruß,
ceego
 
Ubuntu: /var/log/messages
Windows: Systemsteuerung/Verwaltung/Ereignisanzeige
 
Hallo,

also die Log in Xubuntu zeigt mir folgendes:

Code: 
Dec  2 14:57:25 r170176 kernel: [ 2220.712186] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
Dec  2 14:57:25 r170176 kernel: [ 2221.071693] cfg80211: Calling CRDA to update world regulatory domain
Dec  2 14:57:25 r170176 kernel: [ 2221.198657] cfg80211: World regulatory domain updated:
Dec  2 14:57:25 r170176 kernel: [ 2221.198673] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Dec  2 14:57:25 r170176 kernel: [ 2221.198684] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Dec  2 14:57:25 r170176 kernel: [ 2221.198695] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Dec  2 14:57:25 r170176 kernel: [ 2221.198705] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Dec  2 14:57:25 r170176 kernel: [ 2221.198716] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Dec  2 14:57:25 r170176 kernel: [ 2221.198726] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Dec  2 14:57:25 r170176 kernel: [ 2221.429275] ath5k 0000:07:00.0: enabling device (0000 -> 0002)
Dec  2 14:57:25 r170176 kernel: [ 2221.429305] ath5k 0000:07:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Dec  2 14:57:25 r170176 kernel: [ 2221.429434] ath5k 0000:07:00.0: registered as 'phy0'
Dec  2 14:57:25 r170176 kernel: [ 2221.633761] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
Dec  2 14:57:25 r170176 kernel: [ 2221.633791] cfg80211: Calling CRDA for country: CN
Dec  2 14:57:25 r170176 kernel: [ 2221.662154] cfg80211: Regulatory domain changed to country: CN
Dec  2 14:57:25 r170176 kernel: [ 2221.662170] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Dec  2 14:57:25 r170176 kernel: [ 2221.662180] 	(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Dec  2 14:57:25 r170176 kernel: [ 2221.662190] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Dec  2 14:57:26 r170176 kernel: [ 2221.864931] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec  2 15:01:44 r170176 kernel: [ 2235.991048] PM: Syncing filesystems ... done.
Dec  2 15:01:44 r170176 kernel: [ 2236.030632] Freezing user space processes ... (elapsed 0.00 seconds) done.
Dec  2 15:01:44 r170176 kernel: [ 2236.032744] Freezing remaining freezable tasks ... (elapsed 0.09 seconds) done.
Dec  2 15:01:44 r170176 kernel: [ 2236.128096] Suspending console(s) (use no_console_suspend to debug)
Dec  2 15:01:44 r170176 kernel: [ 2236.128423] ath5k 0000:07:00.0: PCI INT A disabled
Dec  2 15:01:44 r170176 kernel: [ 2236.144148] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Dec  2 15:01:44 r170176 kernel: [ 2236.705285] sd 0:0:0:0: [sda] Stopping disk
Dec  2 15:01:44 r170176 kernel: [ 2239.416704] nsc-ircc 00:0c: disabled
Dec  2 15:01:44 r170176 kernel: [ 2239.417079] parport_pc 00:0b: disabled
Dec  2 15:01:44 r170176 kernel: [ 2239.417472] serial 00:0a: disabled
Dec  2 15:01:44 r170176 kernel: [ 2239.417621] e100 0000:02:08.0: PME# enabled
Dec  2 15:01:44 r170176 kernel: [ 2239.432167] pci 0000:01:00.0: PCI INT A disabled
Dec  2 15:01:44 r170176 kernel: [ 2239.432362] Intel ICH 0000:00:1f.5: PCI INT B disabled
Dec  2 15:01:44 r170176 kernel: [ 2239.432514] ata_piix 0000:00:1f.1: PCI INT A disabled
Dec  2 15:01:44 r170176 kernel: [ 2239.432529] uhci_hcd 0000:00:1d.2: PCI INT C disabled
Dec  2 15:01:44 r170176 kernel: [ 2239.432540] uhci_hcd 0000:00:1d.1: PCI INT B disabled
Dec  2 15:01:44 r170176 kernel: [ 2239.432550] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Dec  2 15:01:44 r170176 kernel: [ 2239.432598] PM: suspend devices took 3.304 seconds
Dec  2 15:01:44 r170176 kernel: [ 2239.464110] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3
Dec  2 15:01:44 r170176 kernel: [ 2239.576088] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
Dec  2 15:01:44 r170176 kernel: [ 2239.728095] ACPI: Preparing to enter system sleep state S3
Dec  2 15:01:44 r170176 kernel: [ 2242.032261] Disabling non-boot CPUs ...
Dec  2 15:01:44 r170176 kernel: [ 2242.032297] ACPI: Waking up from system sleep state S3
Dec  2 15:01:44 r170176 kernel: [ 2243.376091] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Dec  2 15:01:44 r170176 kernel: [ 2243.408106] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
Dec  2 15:01:45 r170176 kernel: [ 2244.364626] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Dec  2 15:01:45 r170176 kernel: [ 2244.364658] usb usb1: root hub lost power or was reset
Dec  2 15:01:45 r170176 kernel: [ 2244.364682] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
Dec  2 15:01:45 r170176 kernel: [ 2244.364710] usb usb2: root hub lost power or was reset
Dec  2 15:01:45 r170176 kernel: [ 2244.364731] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
Dec  2 15:01:45 r170176 kernel: [ 2244.364759] usb usb3: root hub lost power or was reset
Dec  2 15:01:45 r170176 kernel: [ 2244.364796] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
Dec  2 15:01:45 r170176 kernel: [ 2244.364835] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Dec  2 15:01:45 r170176 kernel: [ 2244.477524] pci 0000:01:00.0: PME# disabled
Dec  2 15:01:45 r170176 kernel: [ 2244.477537] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
Dec  2 15:01:45 r170176 kernel: [ 2244.477552] pci 0000:02:02.0: PME# disabled
Dec  2 15:01:45 r170176 kernel: [ 2244.477560] e100 0000:02:08.0: PME# disabled
Dec  2 15:01:45 r170176 kernel: [ 2244.478542] serial 00:0a: activated
Dec  2 15:01:45 r170176 kernel: [ 2244.479629] parport_pc 00:0b: activated
Dec  2 15:01:45 r170176 kernel: [ 2244.480777] nsc-ircc 00:0c: activated
Dec  2 15:01:45 r170176 kernel: [ 2244.482969] sd 0:0:0:0: [sda] Starting disk
Dec  2 15:01:45 r170176 kernel: [ 2244.532736] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
Dec  2 15:01:45 r170176 kernel: [ 2244.532744] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
Dec  2 15:01:45 r170176 kernel: [ 2244.532751] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Dec  2 15:01:45 r170176 kernel: [ 2244.556654] ata1.00: configured for UDMA/100
Dec  2 15:01:45 r170176 kernel: [ 2244.580654] ata1.00: configured for UDMA/100
Dec  2 15:01:45 r170176 kernel: [ 2244.580661] ata1: EH complete
Dec  2 15:01:45 r170176 kernel: [ 2247.604154] 
Dec  2 15:01:45 r170176 kernel: [ 2247.604158] floppy driver state
Dec  2 15:01:45 r170176 kernel: [ 2247.604161] -------------------
Dec  2 15:01:45 r170176 kernel: [ 2247.604167] now=486901 last interrupt=4294897173 diff=557024 last called handler=f8086500
Dec  2 15:01:45 r170176 kernel: [ 2247.604172] timeout_message=lock fdc
Dec  2 15:01:45 r170176 kernel: [ 2247.604175] last output bytes:
Dec  2 15:01:45 r170176 kernel: [ 2247.604179] 18 80 4294892761
Dec  2 15:01:45 r170176 kernel: [ 2247.604183]  8 80 4294892761
Dec  2 15:01:45 r170176 kernel: [ 2247.604186]  8 80 4294892761
Dec  2 15:01:45 r170176 kernel: [ 2247.604190]  8 80 4294892761
Dec  2 15:01:45 r170176 kernel: [ 2247.604194]  8 80 4294892761
Dec  2 15:01:45 r170176 kernel: [ 2247.604198] 12 80 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604201]  0 90 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604205] 13 80 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604209]  0 90 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604212] 1a 90 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604216]  0 90 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604220]  3 80 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604223] c1 90 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604227] 10 90 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604231]  7 80 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604234]  0 90 4294896994
Dec  2 15:01:45 r170176 kernel: [ 2247.604238]  8 81 4294897081
Dec  2 15:01:45 r170176 kernel: [ 2247.604241]  7 80 4294897086
Dec  2 15:01:45 r170176 kernel: [ 2247.604245]  0 90 4294897086
Dec  2 15:01:45 r170176 kernel: [ 2247.604249]  8 81 4294897173
Dec  2 15:01:45 r170176 kernel: [ 2247.604252] last result at 4294897173
Dec  2 15:01:45 r170176 kernel: [ 2247.604255] last redo_fd_request at 431374
Dec  2 15:01:45 r170176 kernel: [ 2247.604259] 70  0 
Dec  2 15:01:45 r170176 kernel: [ 2247.604267] status=0
Dec  2 15:01:45 r170176 kernel: [ 2247.604269] fdc_busy=1
Dec  2 15:01:45 r170176 kernel: [ 2247.604273] do_floppy=f8082770
Dec  2 15:01:45 r170176 kernel: [ 2247.604276] cont=f808b904
Dec  2 15:01:45 r170176 kernel: [ 2247.604280] current_req=(null)
Dec  2 15:01:45 r170176 kernel: [ 2247.604283] command_status=-1
Dec  2 15:01:45 r170176 kernel: [ 2247.604286] 
Dec  2 15:01:45 r170176 kernel: [ 2247.604291] floppy0: floppy timeout called
Dec  2 15:01:45 r170176 kernel: [ 2247.673529] ath5k 0000:07:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Dec  2 15:01:45 r170176 kernel: [ 2247.673773] PM: resume devices took 3.412 seconds
Dec  2 15:01:45 r170176 kernel: [ 2247.673826] Restarting tasks ... done.
Dec  2 15:01:46 r170176 kernel: [ 2248.810454] ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec  2 15:01:46 r170176 kernel: [ 2248.888521] ADDRCONF(NETDEV_UP): wlan0: link is not ready

Außerdem geht der Standby wenn ich im Netzbetrieb bin.
Wenn im Batteriebetrieb seht ihr was bei 15:01:44 passiert: Notebook schaltet sich von selbst wieder ein...
 
Könnte Zeile 30 Dec 2 15:01:44 r170176 kernel: [ 2239.417621] e100 0000:02:08.0: PME# enabled
der Auslöser für das Aufwachen sein?
 
Was ist denn PME?

Also in Zeile 20 wacht er wieder auf (zumindest laut Uhrzeit).
BTW: Auch im Netzbetrieb funktionierts nicht, hab mich getäuscht.
Ich probier mal schnell anstatt Standby den Ruhezustand...
EDIT:
Wenn ich auf Ruhezustand klicke passiert gar nichts, im Windows geht jetzt der Standby scheinbar dank IBM PowerManagement-Treiber...
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
  • ok1.de
  • ok2.de
  • thinkstore24.de
  • Preiswerte-IT - Gebrauchte Lenovo Notebooks kaufen

Werbung

Zurück
Oben