Hallo,
mein System-Update schlägt fehl:
Den Neustart habe ich nach mehr als fünf Minuten schwarzem Bildschirm (Lüfter EIN auf hoher Stufe) abgebrochen, System AUS > EIN. Dann:
Was nun? Danke, Michael
mein System-Update schlägt fehl:
Code:
$ fwupdmgr refresh
Updating lvfs-testing
Herunterladen … [***************************************]
Herunterladen … [***************************************]
Updating lvfs
Herunterladen … [***************************************]
Successfully downloaded new metadata: 3 local devices supported
$ fwupdmgr get-updates
Devices with no available firmware updates:
• Integrated Camera
• Samsung SSD 970 EVO Plus 2TB
• UEFI Device Firmware
• UEFI Device Firmware
• UEFI Device Firmware
• UEFI Device Firmware
• UEFI Device Firmware
Devices with the latest available firmware version:
• Prometheus
• UEFI dbx
20UH001QGE
│
└─System Firmware:
│ Device ID: b4718caaf1dc79bb34f276c98081532f468822aa
│ Current version: 0.1.29
│ Vendor: LENOVO (DMI:LENOVO)
│ GUIDs: 428ba8ba-40c8-4446-8d7a-394d6c28b26a
│ 230c8b18-8d9b-53ec-838b-6cfc0383493a
│ 660e54f1-43fd-5b2b-a7b5-36422f9c8f2f
│ Device Flags: • Internal device
│ • Updatable
│ • System requires external power source
│ • Supported on remote server
│ • Needs a reboot after installation
│ • Cryptographic hash verification is available
│ • Device is usable for the duration of the update
│
├─ThinkPad X13/T14s Gen 1 AMD System Update:
│ New version: 0.1.32
│ Remote ID: lvfs
│ Zusammenfassung: Lenovo ThinkPad X13/T14s Gen 1 AMD System Firmware
│ License: Proprietary
│ Size: 17,9 MB
│ Created: 2021-05-14
│ Urgency: High
│ Vendor: Lenovo Ltd.
│ Flags: is-upgrade
│ Beschreibung:
│ This stable release fixes the following issues:
│
│ • Fixed an issue that Fixed TSC synchronization failed under linux.
│ • Fixed an issue that Optimize for Linux S5 power consumption problem.
│ • Fixed an issue that display not light up and system hang up when connect monitor with CS18 dock.
│ • Fixed an issue that ACPI Error: Region EmbeddedControl (ID=3) has no handler under Linux.
│
│ Some new functionality has also been added:
│
│ • Enable DMAR support.
│ • Sync system base board version to SMBIOS type2.
│ • Add Odometer SSD Read Write Counts Metric.
│ • Add enhance Tamper Protection control for T14s AMD
│
│ Notes:In case user update the UEFI BIOS v1.32 (R1CET63W) , need to load default configuration in BIOS setup.(For enable DMAr function support).
│
│ 1).Please press F1 key to BIOS setup.2).Press the F9 key to load default configuration.3).Select Yes.4).Press F10 key to save default configuration and exit.5).Select Yes. The computer will be restarted automatically.
│
└─ThinkPad X13/T14s Gen 1 AMD System Update:
New version: 0.1.30
Remote ID: lvfs
Zusammenfassung: Lenovo ThinkPad X13/T14s Gen 1 AMD System Firmware
License: Proprietary
Size: 17,9 MB
Created: 2021-01-04
Urgency: High
Vendor: Lenovo Ltd.
Flags: is-upgrade
Beschreibung:
This stable release fixes the following issues:
• Unit report abnormal beep code after plug out LCD cable then power on unit.
• One dock LED is always on after system enter S3/S4/S5 and attach two same dock to system.
$ fwupdmgr update
Devices with no available firmware updates:
• Integrated Camera
• Samsung SSD 970 EVO Plus 2TB
• UEFI Device Firmware
• UEFI Device Firmware
• UEFI Device Firmware
• UEFI Device Firmware
• UEFI Device Firmware
Devices with the latest available firmware version:
• Prometheus
Upgrade available for System Firmware from 0.1.29 to 0.1.32
20UH001QGE must remain plugged into a power source for the duration of the update to avoid damage. Continue with update? [Y|n]: Y
Herunterladen … [***************************************] Weniger als eine Minute verbleiben…
Entpacken … [***************************************]
Authentifizierung … [***************************************]
Authentifizierung … [***************************************]
System Firmware wird aktualisiert …******************************]
Einplanen … [***************************************]
Successfully installed firmware
• UEFI dbx
Ein Neustart ist erforderlich, um eine Aktualisierung abzuschließen.
Den Neustart habe ich nach mehr als fünf Minuten schwarzem Bildschirm (Lüfter EIN auf hoher Stufe) abgebrochen, System AUS > EIN. Dann:
Code:
fwupdmgr get-devices
Nicht korrekt aktualisierte Geräte:
• System Firmware (0.1.29 → 0.1.32)