Ich habe thinkfan unter Ubuntu auf meinem T520 so konfiguriert, daß der Lüfter bei 56 Grad anspringt und Korrekturwerte habe ich jetzt auch gesetzt. Thinkfan scheint diese Konfiguration aber nicht zu nutzen und lässt den Lüfter auch unter dieser Temperatur laufen. Hat jemand eine Idee was konkret die Ursache dafür sein könnte? Aus den Warnmeldungen werde ich nicht schlau.
Meine /etc/thinkfan.conf sieht so aus:
Code:
jens@T500:~$ systemctl status thinkfan.service
● thinkfan.service - simple and lightweight fan control program
Loaded: loaded (/lib/systemd/system/thinkfan.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2019-05-22 11:50:50 CEST; 1h 49min ago
Main PID: 15127 (thinkfan)
Tasks: 1 (limit: 4915)
Memory: 624.0K
CGroup: /system.slice/thinkfan.service
└─15127 /usr/sbin/thinkfan -q -b 1 -s 3
Mai 22 11:50:50 T500 systemd[1]: Starting simple and lightweight fan control program...
Mai 22 11:50:50 T500 thinkfan[15117]: thinkfan 0.9.1 starting...
Mai 22 11:50:50 T500 thinkfan[15117]: WARNING: Using default fan control in /proc/acpi/ibm/fan.
Mai 22 11:50:50 T500 thinkfan[15117]: WARNING: You're using simple temperature limits without correction values, and your fan will only start at 56 °C. This can be dangerous for your hard drive.
Mai 22 11:50:50 T500 systemd[1]: Started simple and lightweight fan control program.
Mai 22 12:38:27 T500 systemd[1]: /lib/systemd/system/thinkfan.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly.
Mai 22 12:38:29 T500 systemd[1]: /lib/systemd/system/thinkfan.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly.
Meine /etc/thinkfan.conf sieht so aus:
Code:
hwmon /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp3_input
hwmon /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
hwmon /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp2_input
hwmon /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/hwmon/hwmon1/temp1_input
hwmon /sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input
(0, 0, 56)
(1, 52, 62)
(2, 58, 66)
(3, 62, 70)
(4, 66, 74)
(5, 70, 78)
(7, 74, 32767)