Hallo
Ich habe von einem Forumskollegen für mein T440p das LTE-Modul Sierra Wireless EM7345 gekauft. Unter Windows10 läuft es nach einem Firmwareupdate (neu: v1.2) tadellos. Wenn ich indes unter Ubuntu 16.10 versuche, eine Mobile Breitbandverbindung zu herzustellen, klappt das nicht und in der Panelanzeige des Networkmanagers erscheint bei der mobilen Breitbandverbindung die Meldung "nicht aktiviert (vgl. Bild im Anhang)
Die wesentlichen Terminalausgaben sind folgende:
uname -a
lsusb
usb-devices
cat /etc/network/interfaces
cat /etc/resolv.conf
cat /etc/hosts
ifconfig -a
iwconfig
route -n
arp -av
cat /var/lib/NetworkManager/NetworkManager.state
cat /etc/NetworkManager/NetworkManager.conf
ping -c 2 $(route -n | grep UG | awk {'print $2'})
Am Modul kann es eigentlich nicht liegen. Für Hinweise, wie ich das Teil auch unter Ubuntu zum Laufen kriege, bin ich sehr empfänglich.
bcbg
Ich habe von einem Forumskollegen für mein T440p das LTE-Modul Sierra Wireless EM7345 gekauft. Unter Windows10 läuft es nach einem Firmwareupdate (neu: v1.2) tadellos. Wenn ich indes unter Ubuntu 16.10 versuche, eine Mobile Breitbandverbindung zu herzustellen, klappt das nicht und in der Panelanzeige des Networkmanagers erscheint bei der mobilen Breitbandverbindung die Meldung "nicht aktiviert (vgl. Bild im Anhang)
Die wesentlichen Terminalausgaben sind folgende:
uname -a
Code:
Linux XXX-ThinkPad-T440p 4.8.0-40-generic #43-Ubuntu SMP Thu Feb 23 16:01:19 UTC 2017 x86_64 x86_64 x86_64 GNU/Linuxlsusb
Code:
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 007: ID 138a:0017 Validity Sensors, Inc. Fingerprint Reader
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 006: ID 5986:0268 Acer, Inc
Bus 003 Device 004: ID 1199:a001 Sierra Wireless, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubusb-devices
Code:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=04.08
S: Manufacturer=Linux 4.8.0-40-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1a.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 6
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=8008 Rev=00.04
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=04.08
S: Manufacturer=Linux 4.8.0-40-generic ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=8087 ProdID=8000 Rev=00.04
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=15
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=04.08
S: Manufacturer=Linux 4.8.0-40-generic xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1199 ProdID=a001 Rev=17.29
S: Manufacturer=Sierra Wireless Inc.
S: Product=Sierra Wireless EM7345 4G LTE
S: SerialNumber=013937003706445
C: #Ifs= 8 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 1 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 2 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#= 3 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#= 5 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#= 7 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
T: Bus=03 Lev=01 Prnt=01 Port=11 Cnt=02 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=5986 ProdID=0268 Rev=00.03
S: Manufacturer=SunplusIT INC.
S: Product=Integrated Camera
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=03 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs= 1
P: Vendor=046d ProdID=c52b Rev=24.01
S: Manufacturer=Logitech
S: Product=USB Receiver
C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=11 Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=138a ProdID=0017 Rev=00.78
S: SerialNumber=c247b1d67748
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 6
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev=04.08
S: Manufacturer=Linux 4.8.0-40-generic xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:00:14.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hubcat /etc/network/interfaces
Code:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopbackcat /etc/resolv.conf
Code:
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.1.1cat /etc/hosts
Code:
127.0.0.1 localhost
127.0.1.1 XXX-ThinkPad-T440p
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allroutersifconfig -a
Code:
enp0s25: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 28:d2:44:9a:4b:93 txqueuelen 1000 (Ethernet)
RX packets 139199 bytes 203891999 (203.8 MB)
RX errors 0 dropped 343 overruns 0 frame 0
TX packets 59077 bytes 4453700 (4.4 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 20 memory 0xf3600000-f3620000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Lokale Schleife)
RX packets 205192 bytes 12371829 (12.3 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 205192 bytes 12371829 (12.3 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp4s0: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 5c:51:4f:f7:75:5b txqueuelen 1000 (Ethernet)
RX packets 31999 bytes 43000420 (43.0 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 19440 bytes 2558302 (2.5 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wwp0s20u10: flags=4226<BROADCAST,NOARP,MULTICAST> mtu 1428
ether ee:91:e9:9c:ae:50 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0iwconfig
Code:
wwp0s20u10 no wireless extensions.
wlp4s0 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=off
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
enp0s25 no wireless extensions.
lo no wireless extensions.route -n
Code:
Kernel-IP-Routentabelle
Ziel Router Genmask Flags Metric Ref Use Ifacearp -av
Code:
Einträge: 0 Ignoriert: 0 Gefunden: 0cat /var/lib/NetworkManager/NetworkManager.state
Code:
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=truecat /etc/NetworkManager/NetworkManager.conf
Code:
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
[ifupdown]
managed=falseping -c 2 $(route -n | grep UG | awk {'print $2'})
Code:
Usage: ping [-aAbBdDfhLnOqrRUvV64] [-c count] [-i interval] [-I interface]
[-m mark] [-M pmtudisc_option] [-l preload] [-p pattern] [-Q tos]
[-s packetsize] [-S sndbuf] [-t ttl] [-T timestamp_option]
[-w deadline] [-W timeout] [hop1 ...] destination
Usage: ping -6 [-aAbBdDfhLnOqrRUvV] [-c count] [-i interval] [-I interface]
[-l preload] [-m mark] [-M pmtudisc_option]
[-N nodeinfo_option] [-p pattern] [-Q tclass] [-s packetsize]
[-S sndbuf] [-t ttl] [-T timestamp_option] [-w deadline]Am Modul kann es eigentlich nicht liegen. Für Hinweise, wie ich das Teil auch unter Ubuntu zum Laufen kriege, bin ich sehr empfänglich.
bcbg
Anhänge
Zuletzt bearbeitet:
