Hiho,
ich habe mit meinem X200s eine HDD bekommen, bei der ich über die Smart-Werte gestolpert bin.
Von daher wollte ich mal ein paar Leute mit mehr Erfahrung darüberblicken lassen und nach deren Meinung fragen:
Hier die Werte von Smarmontools
Und die passende Frage: Muss ich mich Gedanken machen, bei dem Wert für Start_Stop_Count, bei dem auch das FAILING_NOW dahintersteht?
Sonst fällt mir an der HDD nichts untypisches auf, also kein klackern oder ähnliches.
Vielen Dank schon einmal für eure Antworten!
ich habe mit meinem X200s eine HDD bekommen, bei der ich über die Smart-Werte gestolpert bin.
Von daher wollte ich mal ein paar Leute mit mehr Erfahrung darüberblicken lassen und nach deren Meinung fragen:
Hier die Werte von Smarmontools
Code:
[FONT=courier new]=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.4
Device Model: ST9160827AS
Serial Number: 5RG8DYBB
LU WWN Device Id: 5 000c50 014771aa3
Firmware Version: 3.CMG
User Capacity: 160.041.885.696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Fri Sep 19 20:56:22 2014 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
MART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 070 034 Pre-fail Always - 870830
3 Spin_Up_Time 0x0003 100 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 001 001 020 Old_age Always FAILING_NOW 271796
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 119834704
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4887 (81 15 0)
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1151
184 End-to-End_Error 0x0032 100 253 000 Old_age Always - 0
187 Reported_Uncorrect 0x003a 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x0022 100 100 045 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 068 048 000 Old_age Always - 32 (Min/Max 15/52)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 16
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 76
193 Load_Cycle_Count 0x001a 001 001 000 Old_age Always - 270628
194 Temperature_Celsius 0x0012 032 052 000 Old_age Always - 32 (0 15 0 0 0)
195 Hardware_ECC_Recovered 0x0010 102 059 000 Old_age Offline - 3915632
196 Reallocated_Event_Count 0x003e 097 097 000 Old_age Always - 3173 (58718 0)
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0000 100 253 000 Old_age Offline - 0[/FONT]
Und die passende Frage: Muss ich mich Gedanken machen, bei dem Wert für Start_Stop_Count, bei dem auch das FAILING_NOW dahintersteht?
Sonst fällt mir an der HDD nichts untypisches auf, also kein klackern oder ähnliches.
Vielen Dank schon einmal für eure Antworten!