dear_santa
New member
- Registriert
- 9 Nov. 2011
- Beiträge
- 7
Hi Leute,
ist es normal, dass ein ThinkPad T420 mit ca 26 bis 30 Watt Leistung am Akku zieht?
Ich hab zwar schon TLP installier und eingerichtet, aber viel hat sich nicht geändert, außer das ein shutdown von Zeit zu Zeit als restart behandelt wird.
Außerdem tourt der Lüfter dauernd. Es ist selten, dass er mal weniger als 2600 Umdrehungen hat.
Ich nutze Linux mint 12 und hab auch schon Thinkfan eingerichtet, aber eine Verbesserung kann ich nicht feststellen.
Ich würde hier mal meine Einstellungen posten, da bestimmt dort der Hund begraben liegt.
Vielleicht kann mir ja jemand von euch sagen, was ich falsche gemacht habe.
tlp-stat
sensors-detect
lm-sensors
thinkfan.conf
ist es normal, dass ein ThinkPad T420 mit ca 26 bis 30 Watt Leistung am Akku zieht?
Ich hab zwar schon TLP installier und eingerichtet, aber viel hat sich nicht geändert, außer das ein shutdown von Zeit zu Zeit als restart behandelt wird.
Außerdem tourt der Lüfter dauernd. Es ist selten, dass er mal weniger als 2600 Umdrehungen hat.
Ich nutze Linux mint 12 und hab auch schon Thinkfan eingerichtet, aber eine Verbesserung kann ich nicht feststellen.
Ich würde hier mal meine Einstellungen posten, da bestimmt dort der Hund begraben liegt.
Vielleicht kann mir ja jemand von euch sagen, was ich falsche gemacht habe.
tlp-stat
Code:
--- tlp 0.3.3 --------------------------------------------
System = LENOVO ThinkPad T420 4180PH3
BIOS = 83ET63WW (1.33 )
Release = Linux Mint 12 Lisa
Kernel = 3.0.0-13-generic x86_64
tlp power save = enabled
power source = ac
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/sched_mc_power_savings = 0
/sys/devices/system/cpu/sched_smt_power_savings = 0
/proc/sys/kernel/nmi_watchdog = (not available)
/sys/devices/system/cpu/cpu?/cpufreq/phc_controls = (phc kernel not available)
/proc/acpi/ibm/thermal = (thinkpad_acpi not available)
/proc/sys/vm/laptop_mode = 0
/proc/sys/vm/dirty_writeback_centisecs = 1500
/proc/sys/vm/dirty_expire_centisecs = 1500
/proc/sys/vm/dirty_ratio = 60
/proc/sys/vm/dirty_background_ratio = 1
/proc/sys/fs/xfs/age_buffer_centisecs = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs = (not available)
/dev/sda:
Model = ST9500420AS
Firmware = 0003LVM1
APM Level = 254
scheduler = cfq
SMART info:
4 Start_Stop_Count = 168
5 Reallocated_Sector_Ct = 0
9 Power_On_Hours = 96984656511041 [h]
193 Load_Cycle_Count = 707
194 Temperature_Celsius = 38 (0 12 0 [°C]
/dev/sdb:
Model = OCZ-NOCTI
Firmware = 2.15
APM Level = 254
scheduler = cfq
SMART info:
5 Reallocated_Sector_Ct = 0
9 Power_On_Hours = 163277476724800 [h]
194 Temperature_Celsius = 128 (Min/Max 127/129) [°C]
231 Temperature_Celsius = 0 [°C]
233 Media_Wearout_Indicator = 0 [%]
/sys/class/scsi_host/host0/link_power_management_policy = max_performance
/sys/class/scsi_host/host1/link_power_management_policy = max_performance
/sys/class/scsi_host/host2/link_power_management_policy = max_performance
/sys/class/scsi_host/host3/link_power_management_policy = max_performance
/sys/class/scsi_host/host4/link_power_management_policy = max_performance
/sys/class/scsi_host/host5/link_power_management_policy = max_performance
/sys/module/pcie_aspm/parameters/policy = default (disabled by kernel)
bluetooth = off (software)
wifi = on
wwan = none (no device)
wlan0(iwlagn): power management = off
/sys/module/snd_hda_intel/parameters/power_save = 1
/sys/module/snd_hda_intel/parameters/power_save_controller = Y
/sys/devices/platform/smapi/BAT0/manufacturer = SANYO
/sys/devices/platform/smapi/BAT0/manufacture_date = 2011-10-25
/sys/devices/platform/smapi/BAT0/first_use_date = 2011-11-18
/sys/devices/platform/smapi/BAT0/cycle_count = 10
/sys/devices/platform/smapi/BAT0/design_capacity = 56160 [mWh]
/sys/devices/platform/smapi/BAT0/last_full_capacity = 58950 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_capacity = 52530 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_percent = 89 [%]
/sys/devices/platform/smapi/BAT0/remaining_running_time_now = not_discharging [min]
/sys/devices/platform/smapi/BAT0/remaining_charging_time = not_charging [min]
/sys/devices/platform/smapi/BAT0/start_charge_thresh = [%]
/sys/devices/platform/smapi/BAT0/stop_charge_thresh = 90 [%]
tlp usb autosuspend = enabled
tlp usb blacklist = (not configured)
/sys/bus/usb/devices/1-1/power/autosuspend_delay_ms = 2000, control = auto -- 8087:0024 unknown device (hub)
/sys/bus/usb/devices/1-1.3/power/autosuspend_delay_ms = 2000, control = auto -- 147e:2016 Biometric Coprocessor (no driver)
/sys/bus/usb/devices/1-1.6/power/autosuspend_delay_ms = 2000, control = auto -- 04f2:b221 Integrated Camera (uvcvideo)
/sys/bus/usb/devices/2-1/power/autosuspend_delay_ms = 2000, control = auto -- 8087:0024 unknown device (hub)
/sys/bus/usb/devices/2-1.5/power/autosuspend_delay_ms = 2000, control = auto -- 17ef:1003 Integrated Smart Card Reader (no driver)
/sys/bus/usb/devices/usb1/power/autosuspend_delay_ms = 2000, control = auto -- 1d6b:0002 EHCI Host Controller (hub)
/sys/bus/usb/devices/usb2/power/autosuspend_delay_ms = 2000, control = auto -- 1d6b:0002 EHCI Host Controller (hub)
--- tlp 0.3.3 --------------------------------------------
System = LENOVO ThinkPad T420 4180PH3
BIOS = 83ET63WW (1.33 )
Release = Linux Mint 12 Lisa
Kernel = 3.0.0-13-generic x86_64
tlp power save = enabled
power source = battery
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor = ondemand
/sys/devices/system/cpu/sched_mc_power_savings = 1
/sys/devices/system/cpu/sched_smt_power_savings = 0
/proc/sys/kernel/nmi_watchdog = (not available)
/sys/devices/system/cpu/cpu?/cpufreq/phc_controls = (phc kernel not available)
/proc/acpi/ibm/thermal = (thinkpad_acpi not available)
/proc/sys/vm/laptop_mode = 2
/proc/sys/vm/dirty_writeback_centisecs = 6000
/proc/sys/vm/dirty_expire_centisecs = 6000
/proc/sys/vm/dirty_ratio = 60
/proc/sys/vm/dirty_background_ratio = 1
/proc/sys/fs/xfs/age_buffer_centisecs = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs = (not available)
/dev/sda:
Model = ST9500420AS
Firmware = 0003LVM1
APM Level = 128
scheduler = cfq
SMART info:
4 Start_Stop_Count = 168
5 Reallocated_Sector_Ct = 0
9 Power_On_Hours = 43267500539969 [h]
193 Load_Cycle_Count = 708
194 Temperature_Celsius = 38 (0 12 0 [°C]
/dev/sdb:
Model = OCZ-NOCTI
Firmware = 2.15
APM Level = 128
scheduler = cfq
SMART info:
5 Reallocated_Sector_Ct = 0
9 Power_On_Hours = 108078557036608 [h]
194 Temperature_Celsius = 128 (Min/Max 127/129) [°C]
231 Temperature_Celsius = 0 [°C]
233 Media_Wearout_Indicator = 0 [%]
/sys/class/scsi_host/host0/link_power_management_policy = min_power
/sys/class/scsi_host/host1/link_power_management_policy = min_power
/sys/class/scsi_host/host2/link_power_management_policy = min_power
/sys/class/scsi_host/host3/link_power_management_policy = min_power
/sys/class/scsi_host/host4/link_power_management_policy = min_power
/sys/class/scsi_host/host5/link_power_management_policy = min_power
/sys/module/pcie_aspm/parameters/policy = default (disabled by kernel)
bluetooth = off (software)
wifi = on
wwan = none (no device)
wlan0(iwlagn): power management = on
/sys/module/snd_hda_intel/parameters/power_save = 1
/sys/module/snd_hda_intel/parameters/power_save_controller = Y
/sys/devices/platform/smapi/BAT0/manufacturer = SANYO
/sys/devices/platform/smapi/BAT0/manufacture_date = 2011-10-25
/sys/devices/platform/smapi/BAT0/first_use_date = 2011-11-18
/sys/devices/platform/smapi/BAT0/cycle_count = 10
/sys/devices/platform/smapi/BAT0/design_capacity = 56160 [mWh]
/sys/devices/platform/smapi/BAT0/last_full_capacity = 58950 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_capacity = 52420 [mWh]
/sys/devices/platform/smapi/BAT0/remaining_percent = 89 [%]
/sys/devices/platform/smapi/BAT0/remaining_running_time_now = 121 [min]
/sys/devices/platform/smapi/BAT0/remaining_charging_time = not_charging [min]
/sys/devices/platform/smapi/BAT0/start_charge_thresh = [%]
/sys/devices/platform/smapi/BAT0/stop_charge_thresh = 90 [%]
tlp usb autosuspend = enabled
tlp usb blacklist = (not configured)
/sys/bus/usb/devices/1-1/power/autosuspend_delay_ms = 2000, control = auto -- 8087:0024 unknown device (hub)
/sys/bus/usb/devices/1-1.3/power/autosuspend_delay_ms = 2000, control = auto -- 147e:2016 Biometric Coprocessor (no driver)
/sys/bus/usb/devices/1-1.6/power/autosuspend_delay_ms = 2000, control = auto -- 04f2:b221 Integrated Camera (uvcvideo)
/sys/bus/usb/devices/2-1/power/autosuspend_delay_ms = 2000, control = auto -- 8087:0024 unknown device (hub)
/sys/bus/usb/devices/2-1.5/power/autosuspend_delay_ms = 2000, control = auto -- 17ef:1003 Integrated Smart Card Reader (no driver)
/sys/bus/usb/devices/usb1/power/autosuspend_delay_ms = 2000, control = auto -- 1d6b:0002 EHCI Host Controller (hub)
/sys/bus/usb/devices/usb2/power/autosuspend_delay_ms = 2000, control = auto -- 1d6b:0002 EHCI Host Controller (hub)
sensors-detect
Code:
/sys/devices/platform/coretemp.0/temp1_input
/sys/devices/platform/coretemp.0/temp2_input
/sys/devices/platform/coretemp.0/temp3_input
/sys/devices/virtual/hwmon/hwmon0/temp1_input
lm-sensors
Code:
acpitz-virtual-0
Adapter: Virtual device
temp1: +52.0°C (crit = +98.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +52.0°C (high = +86.0°C, crit = +100.0°C)
Core 0: +47.0°C (high = +86.0°C, crit = +100.0°C)
Core 1: +46.0°C (high = +86.0°C, crit = +100.0°C)
thinkpad-isa-0000
Adapter: ISA adapter
fan1: 3405 RPM
thinkfan.conf
Code:
######################################################################
# thinkfan 0.7 example config file
# ================================
#
# ATTENTION: There is only very basic sanity checking on the configuration.
# That means you can set your temperature limits as insane as you like. You
# can do anything stupid, e.g. turn off your fan when your CPU reaches 70°C.
#
# That's why this program is called THINKfan: You gotta think for yourself.
#
######################################################################
#
# IBM/Lenovo Thinkpads (thinkpad_acpi, /proc/acpi/ibm)
# ====================================================
#
# IMPORTANT:
#
# To keep your HD from overheating, you have to specify a correction value for
# the sensor that has the HD's temperature. You need to do this because
# thinkfan uses only the highest temperature it can find in the system, and
# that'll most likely never be your HD, as most HDs are already out of spec
# when they reach 55 °C.
# Correction values are applied from left to right in the same order as the
# temperatures are read from the file.
#
# For example:
# sensor /proc/acpi/ibm/thermal (0, 0, 10)
# will add a fixed value of 10 °C the 3rd value read from that file. Check out
# http://www.thinkwiki.org/wiki/Thermal_Sensors to find out how much you may
# want to add to certain temperatures.
# Syntax:
# (LEVEL, LOW, HIGH)
# LEVEL is the fan level to use (0-7 with thinkpad_acpi)
# LOW is the temperature at which to step down to the previous level
# HIGH is the temperature at which to step up to the next level
# All numbers are integers.
#
#Sensors
sensor /sys/devices/platform/coretemp.0/temp1_input
sensor /sys/devices/platform/coretemp.0/temp2_input
sensor /sys/devices/platform/coretemp.0/temp3_input
sensor /sys/devices/virtual/hwmon/hwmon0/temp1_input
# I use this on my T61p:
#sensor /proc/acpi/ibm/thermal (0, 10, 15, 2, 10, 5, 0, 3, 0, 3)
(0, 0, 55)
(1, 48, 60)
(2, 50, 61)
(3, 52, 63)
(4, 56, 65)
(5, 59, 66)
(7, 63, 32767)